Advice from experienced craftsmen on how to get and change the heating element for a Samsung washing machine
Samsung automatic washing machines provide high-quality processing of items during a full wash cycle. During prolonged use of the device, malfunctions and wear of individual components are possible.
One of the problems is the failure of the heating element. You can solve the issue of replacing the heating element of a Samsung washing machine yourself or by contacting a specialist.
We will tell you in the article how to remove it, how much it costs, and how to change the heating element.
Content
Purpose of the element
The tubular heating element of the washing machine is designed to heat water. heating element is a metal tube that is filled with a heat-conducting electrical insulator.
A conductive thread runs through its center, ensuring the transfer of the required specific power and heating of water.
Its ends are soldered to the contacts to which voltage is applied when the washing machine is running.
Activation of the heating element is triggered by a signal emanating from the control module. At the same time, the element warms up and transfers heat to the water, heating it to the required temperature.
In addition to washing machines, heating elements used in:
- boilers,
- electric kettles,
- dishwashers,
- heating boilers, etc.
In what cases does it require repair?
During the washing process, most modes require heating the water. If the heating element is damaged, then the water does not heat up. The Samsung washing machine reports a malfunction using an error code that appears on the display.
It could be:
NS2,Machines that do not have a display on the body signal a failure in the following way:
- flashing of all wash mode indicators;
- two central temperature indicators are lit.
Or in this version:
- flashing of all wash mode indicators;
- The second from the top and bottom temperature lights are on.
If the machine displays an error code and does not heat up, you need to make sure that the problem is in the heating element.
To do this you should:
- Check whether the machine is properly connected to the power supply. If possible, extension cords and tees should be removed to allow connections directly into the outlet.
- Check whether the failure is a random malfunction. To do this, turn off the machine, then turn it on and start working again.
If after all the checks, the heating element still does not heat, you will have to do repairs. To do this you will need a tool and a new part.
The lack of heating does not necessarily indicate a problem with the heating element, we also cannot exclude the possibility of a failure in the control module and a breakdown of the temperature sensor.
It is possible to verify that the device is not working only by measuring the resistance. This can be done with a multimeter. Before this test, it is impossible to say for sure that the problem is in the heating element. Failure of the heating element is one of the most common malfunctions.
Where is he located?
In order to gain access to the heating element, it is necessary to partially disassemble the washing machine. To do this you will need a set of screwdrivers. In most Samsung machine models, the heating element is located at the bottom with access from the front side.
Before starting repairs, it is necessary to carry out preparatory work:
Drain water if there is any in the tank.- Disconnect the washing machine from the power supply by unplugging the plug from the socket.
- Turn off the water supply to the machine.
- Pull out the cuvette to add washing powder.
- Pull out the machine in such a way that you have free access to it from all sides.
- From the rear wall, unscrew the screws that hold the top panel.
- Slide the top cover and remove it.
- At the top of the machine, from the front and ends, find and unscrew the screws that hold the panel with indicators. Since it is connected to the machine not only by external fasteners, but also by wires located on the inside, you must act very carefully.
- The unscrewed panel is placed on top of the machine without breaking the contacts.
- Find all the screws that hold the facade panel and unscrew them.
- The front panel is removed. In the area of the hatch lock, this panel is connected to the machine by wiring. The wires must be carefully disconnected, and the panel with the hatch door must be moved to the side.
How to remove and replace with your own hands?
Having gained access to the heating element, you can begin the process of dismantling and subsequent replacement of the part. The work must be carried out in stages:
- Disconnect the supply wires of the heating element.
- Using a multimeter, determine the performance of this element. To do this, one probe is connected to one contact, and the other to the second. If the indicator is “1” or “0”, then the heating element is inoperative. Depending on the model, the indicator should be about 30 ohms.
If the “ringing” gives a positive result, then there is no need to replace the heating element - it is in working order. Otherwise, you need to continue dismantling.- Unscrew the central nut that holds the heating element. Without removing it, it and the pin are slightly recessed inward, squeezing out the gasket. This can be done by lightly hitting the protruding part with a small hammer.
- Rocking, they pull out the heating element. For convenience, you can carefully pry it off with the end of a flat-head screwdriver. You should not forcefully pull the contacts, as they may break off, making it difficult to remove the entire part.
- The new heating element is installed in place of the old one, inserting it all the way.
- After the heating element is firmly seated, it is necessary to tighten the central nut, fixing the heating element.
- Connect the wires.
- Reassemble the washing machine in reverse order.
After completing the assembly, you need to do a test run by selecting a program with water heating.
Video about replacing the heating element on a Samsung washing machine:
Price and place of purchase
A new heating element, to replace a damaged one, can be bought in a store or ordered for delivery through an online store. As a rule, there are no problems with the order.
But it is necessary to approach the issue seriously, since there are various models on sale heating elements. They differ in power and modification.
For Samsung washing machines heating elements often come with power:
- 1.9 kW,
- 1.85 kW.
The cost of one of the popular heating element models for a Samsung washing machine, with a built-in heat sensor, TPd 180-SG-1900, will be from 500 rubles.
The heating element is not the most expensive part. There are many types of heating elements, but it is advisable to choose a model that is similar to the one being replaced. You should not buy a used heating element, even if it is called out - there is no guarantee that it will serve for a long time.
Causes of failure and methods of prevention
One of the main reasons affecting the service life of the heating element is water quality.entering the washing machine.
With hard tap water, lime deposits begin to form on the heating element. Plus, debris sticks to it, which reduces heat transfer and makes the device work more and more intensely.
As a result, overheating occurs, which accompanies almost any washing cycle with heated water. A faulty heating element cannot be repaired; it can only be replaced with a new one.
In order to extend the life of the heating element, it is recommended to clean the washing machine every few months. One of the available options is using citric acid. It is simply poured into the washing powder compartment and one of the modes is started at high temperature.
Preventative cleaning will help clean not only the heating element, but also other elements of the washing machine. You can find out how to descale your washing machine using citric acid. Here.
Calling a master: how to find, how much does the work cost?
If you are unsure of your ability to dismantle and install the heating element, as well as lack the necessary skills and tools, you should contact a company that provides repair services for Samsung washing household appliances. You can search for such a company on the Internet.
In Moscow, the cost of a master’s work, excluding the price of the heating element itself, ranges from 1,800 rubles (by region the amount may be less). If at the same time other problems with the machine are discovered that require attention, the price will be higher. After completing the work, the master issues a guarantee.
Turning to private craftsmen cannot provide confidence in the quality of the work being carried out. If the result is unsatisfactory, it will not even be possible to file a claim. In addition, there is a chance to run into scammers and irresponsible performers.
All the most important and useful information about repairing Samsung washing machines is in this section of the site.
Conclusion
Replacing the heating element of a Samsung washing machine is not a very complicated procedure, but it is labor-intensive and requires partial disassembly of the device. If you have basic knowledge of equipment repair and have the appropriate tools, this will not be difficult to do. If you do not have such skills, then it is better to contact a repair company. washing machines, and arrange a call for a technician to your home.
