Why does the Atlant washing machine not spin clothes, what should I do?
Spin failure is a fairly common problem that can occur with Atlant.
If such a situation occurs, it is imperative to determine the cause of the malfunction and carry out repairs. Sometimes this can even be done on your own.
Why the Atlant washing machine does not spin out clothes and what to do, we will tell you further.
Content
Possible reasons why the spin cycle does not work
If the Atlant washing machine does not spin out the clothes after washing, there can be many reasons. Conventionally, they can be divided into several groups:
- User errors.
- Violations that are not directly related to the machine (voltage drops, clogged sewerage in the house).
- Random crashes.
- Equipment breakdowns.
- Blockages in the drain system.
Diagnosis and solutions to the problem
Faced with a situation where the Atlant machine did not spin out the laundry after washing, you need to make sure that the settings are correct when choosing a work program.
Lack of spin occurs when the user has chosen to wash without a spin or with a deliberately weak spin (for example, “wool”).Then the remaining water in the drum is a normal situation.
Atlas itself reports some problems through self-diagnosis - it issues an error code. These could be, for example, the following options:
- F4 – drain error;
- F6 – problems with the motor circuit;
- F9 – problem with the tachometer;
- F12 – engine error;
- F15 – problems with the pressure switch.
Even if a specific error code is displayed on the display, more complete diagnostics may be required to determine the cause of the problem.
Imbalance of things
In the case when the Atlant washing machine cannot distribute things in the drum, it diagnoses an imbalance and spinning does not occur.
This may occur in the following cases:
- there are too many things;
- there are too few things;
- things got together in one lump.
Drum jamming
If a foreign object gets into the Atlanta tank, it may interfere with the normal movement of the drum. This problem may appear during the spin cycle, but not during the washing phase. In this case, a sound uncharacteristic of normal washing may be heard - scraping, clanging or knocking.
Solution - removing the foreign object. This is not always easy to do. The easiest option is when a stuck foreign object (for example, a bra wire) can be removed through the drum without disassembling the washing machine. But in most cases, you will have to partially disassemble the device to get to the object that is preventing rotation.
Blockage
A common situation is blockage.This could be a blockage in the sewer system in the apartment or a blockage in the drainage tract of the device itself.
A clogged drain can occur in any area:
- pipe branch,
- hose,
- water pump,
- drain filter,
- connection to the sewer.
If the sewer is clogged, it needs to be cleaned, and Atlant’s operation will improve without disassembling the washing machine. In the case where there is a blockage in the washing machine itself, it needs to be eliminated.
Drain pump failure
If the Atlanta drain pump fails, the washing machine cannot drain waste water. In this case, the device does not spin and does not drain. Solving the problem - replacing the pump.
Drive belt stretched
The belt transmits torque from the motor to the Atlanta drum. If it is stretched, it may slip, and the spin speed will not be gained. The solution is to replace the belt; it cannot be repaired. Access to the part is through the rear wall.
Motor brushes
If the washing machine does not pick up speed during the spin cycle and even sparks, the problem may be in the motor brushes. These parts are considered consumables. During long-term use, they gradually wear out – they physically wear out. Because of this, the motor cannot rotate the drum at the required speed.
The tachometer has failed
The tachometer in Atlant washing machines is designed to control drum speed. If the sensor breaks down, the drum may not pick up speed to the desired level or may not rotate at all. This is an uncommon situation. The solution is to replace the tachometer.
Shock absorber wear
Shock absorbers serve to stabilize the position of the tank during spinning and washing. – during intensive rotation of the drum.
When the shock absorbers become unusable, and Atlas tries to spin the drum, the car begins to vibrate strongly.
These movements can be so intense that the tank may begin to hit the walls of the washer body. In response to such an abnormal situation, the control module does not allow the drum to rotate intensively, and a full spin does not occur. The solution is to replace the shock absorbers.
Control module malfunction
The control unit coordinates the operation of the entire Atlant washing machine. When individual elements on the board burn out, the operation of those nodes that are connected to them is disrupted.
For a complete diagnosis, this unit is dismantled and tested.. Burnt out radio elements can be replaced. But in case of serious damage, the entire module may need to be replaced.
Bearing wear
The deterioration of the bearing assembly begins with wear of the oil seal. It loses its seal and water gets onto the metal bearings. In this case, corrosion occurs, and due to constant intense vibrations, the unit is destroyed. The defect can be determined by a strong roar, insufficient spin and rusty streaks on the back side of the drum.
Pressostat
If the pressure switch malfunctions, the washing machine may spin the drum, but the clothes will not be spun. In normal condition, the pressure switch transmits information about the water level in the tank to the control module. If the sensor breaks down, the control module cannot identify the amount of water in the tank, and the command to switch to spinning does not come from it.
To analyze the condition of the part, the pressure switch is dismantled. If there is a blockage in the chamber or hose, cleaning is performed. If it breaks, the part will need to be replaced. Details - in this article.
Electric motor
If the cause of the failure is the Atlanta engine, then the washing machine freezes when trying to spin. After restarting, the spinning process does not resume.
But the motor there may be a buzzing noise, and it is even possible that the plugs may be knocked out. To determine the condition of the motor, it is removed from the housing and worked with separately.
The cause of the breakdown may be a break in the winding, a short circuit, or problems with the stator. If possible, the motor is repaired, but more often than not, it is replaced with a new one.
Call the master
It is not always possible to diagnose and repair an Atlant washing machine that does not spin on your own. If in doubt, it is better to call a specialist.
The average price according to Moscow time is:
- replacement of the drive belt – from 900 rubles;
- pump replacement – 1,700 rubles;
- replacement of brushes - from 1500 rubles;
- replacement of shock absorbers - from 2300 rubles;
- removal of a foreign object - from 1400 rubles;
- repair of the control unit - from 2600 rubles;
- bearing replacement – from RUB 3,500;
- replacement of shock absorbers - from 2300 rubles.
Repair work ends with a test run and issuance of a warranty. New parts that are required to be replaced must be paid for separately. The cost of work depends on the complexity of the Atlas breakdown. In some cases, repairs are only possible in a workshop.
Prevention measures
To avoid the problem of spin failure in the Atlant washing machine, You need to remember these simple preventive measures:
Check the pockets of clothes placed in the drum to ensure that no foreign objects accidentally get into it that could cause a blockage.- The device must be installed level and not swing. This will avoid increased vibration and additional load on the components.
- The drum should not be overloaded. Storing items higher than normal not only reduces the quality of washing, but also provokes breakdowns and wear of components.
- If power surges are common in your home, it is advisable to take care of purchasing a stabilizer.
- The room with Atlant should not be constantly damp, since high levels of humidity lead to corrosion of the metal components of the washing machine.
- Do not pour more detergent into the powder receptacle than recommended by the manufacturer. Its excess can lead to increased foam formation and moisture penetration into the housing.
Conclusion
If the Atlant washing machine does not spin, diagnostics are required. The device may require further repairs. Serious breakdowns are not repaired quickly.
If you can’t cope on your own, then the best option is to call a specialist.. You shouldn’t leave the spin situation to chance, since the situation will only get worse if you don’t take any measures. And it can lead to even more expensive repairs.
