What does error F15 mean on the Atlant washing machine and how to fix it?

Domestic consumers are well familiar with TM Atlant household appliances produced in Belarus.

This company has been producing washing machines for several years now, improving production and constantly expanding the model range.

Automatic devices have proven themselves to be reliable equipment at an affordable price. But, like other washing machines, Atlantas can malfunction.

One of the possible situations is error F15 on the display of the Atlant washing machine.

Decoding the F15 code

Failure code F15 almost always appears immediately after turning on the device. If a failure occurs, Atlant no longer responds to pressing other buttons.

In washing machines that do not have a display, the analogue of F15 is a signal from a certain combination of indicators on the control panel. Which lights come on during such a failure depends on the model.

In Atlant washing machines, which belong to the OptimaControl line Problems are indicated by the following indicators:

1. "Prewash".
2. "Wash".
3. "Rinsing".
4. "Water stop."

In washing machines from the SoftControl series, an analogue of F15 is the following combination of light bulbs:

• "Wash";
• "Rinsing";
• "Water Stop";
• "Spin."

When the F15 appears, you should analyze the current situation, and in some cases it is even possible to solve the problem on your own.

Cause of the problem and solutions

Code F15 requires checking the condition of the washing machine. Not in all cases it indicates a serious breakdown.

Leak not related to the washer

The activation of Aquastop does not always indicate a breakdown washing machine Atlant. A situation is possible when water gets onto the tray of a device equipped with the Aquastop function, not from the washing machine itself, but from nearby water supply lines or as a result of accidentally overturning a container with water.

Wrong detergent choice

When washing in Atlant machines it is necessary to fill only with a product that is intended for automatic SMA. If an unsuitable preparation, which is oriented towards manual processing, was placed in the powder receptacle, a lot of foam will begin to form during washing.

As a result, water with foam may get into the pan, which will trigger the Aquastop. The solution to the problem is to use for washing only those washing powders and gels that clearly indicate that they are intended for automatic washing machines.

Too much powder

Too much powder per wash does not always lead to better washing.

The detergent will not only be worse at dissolving and rinsing out of things, but can also cause Aquastop to trigger.

Washing curtains made of tulle, wool and other porous fabrics can also produce an unexpected effect with large foam formation. For such laundry, the dose of powder should be lower.

The solution to the problem is to strictly adhere to the dosage of detergent recommended by the manufacturer and take into account the type of material placed in the drum.

One-time failure

In rare cases, it is possible that a failure with F15 is caused by a power surge or an accidental coincidence. To check a possible situation, you need to disconnect the device from the network for a quarter of an hour, then turn it on again.

If the problem does not go away after rebooting, you will have to move on to more serious diagnostics of the condition of the washing machine.

Water leak

F15 - information that was transmitted through the control module from Aquastop, and it indicates a leak. The cause can be almost any node that is connected directly to water. These could be hoses, pipes, cuffs, tanks, etc.

By identifying the washing stage at which the error occurred, you can narrow down the search for the leaking unit. If code F15 appears when drawing water, then you need to inspect the fill hose, pipes, and possibly the tank itself.

If a leak is detected during the washing stage, you first need to inspect the fill/drain pipes, the hatch rubber and the drum. If a leak occurs during draining The following nodes are included in the diagnosis:

• drain filter;
• drain hose;
• pipes;
• water pump.

Breakdown of the pressure switch

Failure of the water level sensor is manifested by stopping operation and issuing F15. In this case, there are no signs of leakage.

If the pressure switch is “stuck”, the control module does not receive objective information from this unit. The solution to the problem is to inspect the condition of the sensor.

To do this, you need to gain direct access to the unit, which is achieved by partially disassembling the washing machine. If repair is possible, then the pressure switch chamber is cleaned. If it breaks, the pressure switch is replaced with a new one.

Failure of the control module

If the control module fails, the Atlant must be repaired with the replacement of elements and re-soldering of the tracks. As a rule, with F15 the problem concerns the pressure switch or Aquastop circuit. If there are extensive burns and damage, the board is replaced with a new one.

The Aquastop sensor is broken

If the Aquastop sensor fails, it may send unreliable signals about water overflow and flooding to the control circuit. If possible, repairs are carried out, otherwise it is replaced with a new one.

Wiring problems

If the wiring in the circuit that turns on the Aquastop or pressure switch is broken, the display may also display code F15. To analyze the condition of the electrical wiring inside the washing machine, it is necessary to open the case and partially disassemble the device. When identifying a damaged area, twist or replace the entire group.

Call a master: where to find and how much will the work cost?

If the problem cannot be solved on your own, you can contact a company that repairs household washing equipment for help. Such companies are widely represented on the Internet.

On average, MSC prices are:

• eliminating leaks - from 1100 rubles;
• replacement of the pressure switch – from 1,700 rubles;
• repair of the control unit - from 2100 rubles;
• replacement and repair of aquastop - from 2100 rubles;
• wiring repair - from 1600 rubles.

If parts need to be replaced during repairs, their cost will be charged separately. After the repair, the master gives a guarantee for the work he performed.

Prevention measures

In order not to encounter the problem of failure and displaying F15, It is necessary to take into account the following methods of prevention and prevention of problems in the future:

1. Use only powders for washing that are designed for automatic processing.
2. Do not add more powder than recommended by the detergent manufacturer.
3. The washing machine must be installed according to the rules specified in the instructions for the device.
4. Reliable communications to the device must be ensured.

Recommendations

When F15 appears on the Atlanta display Advice from washing machine repair specialists can help:

1. Opening the case yourself is only possible if the device is not under warranty.
2. Before disassembling the washing machine, you should turn off all communications.
3. The analysis of possible breakdowns must be carried out from simple to complex.
4. You should not undertake serious equipment repairs without the knowledge and tools.
5. Replace parts, if such a need arises, preferably with original ones.

Conclusion

Error F15 on the Atlanta display is a problem that requires a mandatory solution.If the cause is not a user error due to improper use of a detergent or a water leak that is not related to the washing machine itself, then repairs will be required by disassembling the case.

It is possible to carry out repairs on your own if you have the skills and tools.. Or you will have to call a specialist.