What does error F8 mean on the Atlant washing machine and how to fix it?
Washing machines from TM Atlant are popular appliances from the Belarusian manufacturer. It has a good set of functions, modern design and affordable price.
But, like any washing machine, Atlantas can fail and display a failure code on the display during operation. In some cases this may be F8.
What does the F8 error code that the Atlant washing machine produces mean, how to detect the malfunction and fix it, we will tell you further.
Content
Code F8, which is issued by the washing machine - what does it mean?
The F8 encoding can appear either immediately at the very beginning of work, or a few minutes after the start, when the device takes in water. Atlas makes several spins of the reel and stops, displaying an error code on the display.
In Atlant devices without a display, an error is indicated by the blinking of certain LEDs on the control panel. Depending on the model of the washing machine, these may be:
- “Wash” - for SoftControl models;
- “Pre-wash” - for OptimaControl models.
F8 is not always a signal of a breakdown; very often a user error leads to a failure.
Causes of malfunction and solutions
When F8 appears, you need to inspect the Atlant washing machine, paying attention to the hatch. If you can see a lot of foam behind the glass, then this may be the problem.
The problem is the detergent
When using washing powder that is not suitable for automatic machines, is of poor quality, or when its dosage is exceeded, Too much foam may form in the drum.
The washing machine diagnoses the situation as a failure due to a high water level. The solution to the problem is to use only suitable detergents in the dosage recommended by the manufacturer.
Excessive amounts of powder can lead to failures and breakdowns of components due to high foam levels. In addition, it is more difficult for the machine to rinse too much detergent from the fibers of things.
The amount of powder does not match the type of things in the drum
Some fabrics have a porous structure, which, when washed, provokes the formation of abundant foam.. Tulle, holofiber (down jacket filler) and some other materials have this property.
When such things are sent to Atlant, the volume of powder should be adjusted downwards. This will prevent the appearance of lush foam and the formation of whitish stains on already washed items.
Errors when installing a household appliance
If the problem with issuing an error code on the Atlanta display occurred with a newly installed machine, you should check whether the connection was made correctly.
In one case, a self-draining may occur, and water will simply flow out of the tank during the process of collecting water and during the cycle; in another case, the so-called “siphon effect” is possible, in which water can be “sucked” from the sewer into the Atlanta tank.
Hose bending is a must, compliance with which prevents the intake of water from the sewer and the release of an unpleasant odor from there. You can clarify all the nuances of installing washing equipment according to the user instructions.
One-time failure
If no foam is visible, and, at first glance, everything is in order with the washing machine, F8 may result in a one-time failure. This could be a power surge, for example.
Solve the situation in this case reboot will help. To do this, you need to unplug the Atlant washing machine from the outlet for a quarter of an hour, and then plug it back in.
But if the situation has not been resolved, it is necessary to conduct diagnostics to identify the problem node.
Breakdown of the pressure switch
If the water level sensor fails, Atlant cannot correctly identify the amount of water in the tank. If there is a problem with the pressure switch, F8 appears when the device is turned on or when water is drawn.
In most cases, problems with the water level sensor require its replacement., but sometimes the problem may be a clog in its chamber or a flying/clogged hose. In such cases, repair is possible. To do this, the unit is removed and cleaned, and the flown hoses are put back in place.
According to statistics, problems with the pressure switch are the most common cause leading to F8. Details - in this article.
Control module failure
The control module coordinates and controls the operation of all electronics of the Atlant washing machine.If resistors, diodes and other radio elements that are involved in determining the water level fail, error F8 is issued immediately after start.
Problem with the water fill valve
If the water fill valve fails, a situation may arise where it allows liquid to pass through even when closed. This state of affairs leads to overflow, and the washing machine displays F8 on the display. The solution to the problem is to replace the valve with a new one.
Where to find the valve in a washing machine and how to change it, you can watch the video:
Wiring fault
If there are breaks and weak contacts in the Atlanta electrical circuit, the device can display fault codes on the display. It could be F8.
You can determine the exact location of the break with the case open and access to the components, which are involved in the process of controlling water levels. After identifying break points, the cable is twisted or replaced.
Call the master
It is not always possible to carry out high-quality diagnostics and cope with the breakdown on your own. If you don’t have confidence and knowledge, it’s better to call a technician from a company that specializes in repairing washing equipment. It’s not difficult to find such companies on the Internet by narrowing the search to your city.
If you have to choose which company to contact, then it is better to give preference to companies that have been working on the market for a long time and have a good reputation. This will allow you to avoid scammers and entrust your assistant to a professional.
The cost of work in different cities may vary. The average prices for repairs in Moscow for Atlanta with F8 are as follows:
- replacement of the water inlet valve - 1600 rubles;
- repair of the control module – from 2100 rubles;
- repair/replacement of the pressure switch – from 1,700 rubles;
- wiring repair - from 1600 rubles.
All parts that need to be replaced are paid by the customer. They are not included in the price for the work.
Prevention measures
To avoid the problem with F8 in Atlanta, Simple preventive measures should be followed:
- After washing, it is advisable to turn off the water supply tap so that the machine is not under pressure.
- For washing, you should only use products that are designed for automatic processing.
- Do not exceed the dosage of powder.
- When storing things, you need to take into account their appearance. If necessary, the volume of detergent should be reduced.
- The washing machine must be connected to communications in accordance with all the rules.
Recommendations
If F8 is on the display and repairs are needed, The following expert advice may help:
- Before opening the Atlanta case, you must disconnect the device from the network and turn off the water.
- To repair a machine that is under warranty, you must contact a service company.
- If the repair is carried out on your own for the first time, then before removing any assembly, it is advisable to photograph all contacts. This will help connect everything correctly after the repair.
Video on the topic of the article
The video will show you how to resolve error F8 of the Atlant washing machine:
Conclusion
Error F8 on the Atlanta display is a signal from the washing machine that a number of components need to be diagnosed. You can identify the cause of the failure and fix the breakdown on your own or with the help of a specialist from a specialized company.
And after eliminating the defect and restoring the functionality of the unit, you need to remember about preventive measures and take care of your faithful assistant - the washing machine.
