What does error F4 mean in the Atlant washing machine and how to fix it?

Atlant - washing equipment from a Belarusian manufacturer. Modern design, good functionality and reasonable cost make these machines very popular.

But even with reliable equipment, malfunctions can occur. One such situation is issuing F4.

What does error F4 mean in the Atlant washing machine, how to detect the malfunction and fix it, we will tell you further.

Decoding the F4 code that the washing machine produces

Code F4 may appear on the washing machine display when entering the draining stage. If it is not possible to remove water from the Atlas tank, the machine freezes and displays a fault code. F4 is a signal to the user about a drainage problem.

In washing machines that are not equipped with a display, the analogue of F4 is the illumination of indicators on the control panel. Which lights are on depends on the production series:

• “Rinse” lights up on washing machines from the SoftControl line;
• “Wash” lights up on OptimaControl devices.

Causes of the failure and how to resolve it

The problem with the drain may be due to blockage or breakdown. First you need to check those problem areas that can lead to F4, but access to them is not difficult. Why the machine does not drain water, you can find out here.

The sewer is clogged

If there is a problem with the sewage system in the apartment, then it needs to be solved immediately. The washing machine cannot drain water from the drum if the drains are clogged.

This situation most often occurs when connecting a drain hose to a siphon in the kitchen, which may be clogged with food waste.

You can check that this is the case in this way - disconnect the hose from the siphon and throw it into the bathtub or sink. If water flows, then the problem with water drainage is not related to the washing machine. The solution is cleaning the sewer in the apartment.

Kink in the drain hose

If the hose that leads from the washing machine to the drain is crushed by furniture or twisted, water may not flow through it. As a result, the waste liquid remains in the tank, and the washing machine cannot proceed to the next stage of operation. It is necessary to inspect the surface of the hose to determine its condition and straighten it.

Clogged drain filter - how to fix it?

The drain filter is a unit that in washing machines serves to catch foreign objects from waste water that accidentally fall into the tank. It is located at the bottom of the facade panel behind the door.

The filter is a part that needs to be cleaned periodically. To do this, turn the filter counterclockwise. In this case, some water flows onto the floor.

If you remove the filter for cleaning when the washer is empty, not too much water comes out. But if there is a lot of water in the tank, then all of it may end up on the floor. To avoid a flood, you need to prepare in advance - prepare low containers for collecting water and rags.

How to clean the filter in Atlanta - on video:

One-time failure - what to do?

A failure in the control module is not a common, but quite possible situation that can happen to Atlant. If this is the case, then you should reboot - turn off the device for a quarter of an hour and turn it on again.

Blockage in the drain system of a household appliance

The Atlanta drain system is a whole unit that includes several parts. The blockage can be in any of them:

• water pump;
• pipe branch;
• hose;
• filter.

The user has free access only to the filter. Getting to the remaining nodes to clean them is more difficult. It may be necessary to disassemble the drainage system and check the permeability of each of them.

Pump failure

Pump - what is it? This is an element of the washing machine that drives water through itself and directs it to the sewer. If F4 is lit on the screen and the water does not drain, it could be either a blockage or a pump failure.

Control block

The block is a board with radio elements connected by tracks. If one of them is burned out or the tracks are damaged, the signal to drain from the control module may not pass through. Even after gaining access to the board, it is not always possible to immediately understand what the problem is - diagnostics are needed.

When damaged radio elements are identified, they are replaced with new ones, the tracks are resoldered. As a last resort (if repair is impossible), the circuit is replaced with a new one.

You can watch the repair of the control module in Atlanta in the video:

The firmware has crashed

If the firmware fails, various malfunctions in the operation of the washing machine are possible. The solution to the problem is flashing.It can be carried out by a specialist familiar with radio electronics.

Wiring damage

The electrical circuit involved in draining contains a control module and a pump. The remaining elements are purely mechanical and are not connected to electricity.

If the wires in this circuit are damaged or the contacts are loose, signals may not pass between the pump and the control module. In this case, the pump does not receive a drain command.

You can check the condition of the wiring only by gaining access to it. If there are damages, they are repaired. If necessary, change the entire cable. Attention is also paid to the condition of the terminals. If necessary, carry out cleaning.

Call the master

Repairing a washing machine is not possible in all cases on your own.

If the problem cannot be resolved, you need to contact a washing machine repair company. You can find the company on the Internet and place a call. It is better to study reviews about the company and price list in advance.

If Atlanta units cannot be repaired, they are replaced. The cost of new parts is paid separately. After the repair, the technician tests the washing machine to verify that the problem has been resolved.

The cost of work depends on the level of complexity and labor costs. According to Moscow time prices are approximately as follows:

• wiring repair – from 1600 rubles;
• replacement of the drain pump - from 1,700 rubles;
• clearing clogs in the washing machine – from 1200 rubles;
• repair of the control unit or flashing – from 2100 rubles.

Prevention

Error F4 on the display is not a rare situation. To avoid such a problem, You should remember about preventive measures:

1. The drain filter must be cleaned periodically - once every 2-3 months. If something with long pile has been washed, it’s unplanned.
2. Checking the pockets of things before putting them into the drum should be a useful habit. This will protect the machine from blockages and breakdowns.
3. If there are poorly fastened elements on the clothes that can come off during washing, it is better to solve this problem before putting the product in the drum - sew on poorly held buttons, pick up worn-out decor, sew up torn lining, etc.
4. If power surges often occur in your home, then it makes sense to think about a voltage stabilizer. This will help protect the electronics of the washing machine.
5. The drain hose must be located freely, without squeezing or strong kinks.

Recommendations

If there is a problem with the washing machine with F4 Expert advice may help:

1. A device that is under warranty should not be repaired yourself.
2. If the filter is severely clogged, it is also advisable to check the pump in the impeller area - there may also be debris there.
3. It is better to replace a deformed hose clogged with debris rather than clean it.
4. If you are not sure that you will be able to cope with the breakdown on your own, it is better to call a specialist.
5. New parts are purchased taking into account the model of the washing machine.
6. You should not leave the washing machine with water and clothes in it for a long time - this is harmful for both the machine and the laundry.

Conclusion

Error F4 in Atlant washing machines is a situation that can be resolved on your own or by calling a technician. Most often, the problem is associated with a negligent attitude towards equipment, which is why the blockage has formed.