Why does the door error occur in the Atlant washing machine, how to fix it?

The drum is loaded, the desired washing program is selected, but for some reason, after pressing the “Start” button, the washing machine does not start the working cycle, but signals with the “Door” error.

Information about what can provoke such a situation and how to correct it will allow you to return the Atlant washing machine to working order as quickly as possible.

What does the Door error mean in the Atlant washing machine and what to do to eliminate it, we will tell you further.

What does the code that the washing machine produces mean?

Just by the name of the error “Door” (translated from English as a door), it is clear that the malfunction of the washing machine is associated with the loading hatch door.

If the Atlant washing machine is not equipped with an information display, that the doors are not locked will be indicated by flashing indicators 1,3,4.

Why does it appear and what should I do?

There are many reasons why a washing machine gives a “door” error.

Improper use of a household appliance

Diagnostics begins with the simplest thing - checking how tightly the hatch door is closed.

For this it is gently pressed until the characteristic click of the UBL lock appears. If the error does not disappear, the door must be opened and the rubber seal carefully inspected.

It is possible that a foreign object (sock, underwear, etc.) has gotten into the cuff and is preventing the hatch from closing, or the rubber seal has become deformed or stretched (a displaced cuff prevents the hatch from closing completely).

Additionally, check the cleanliness of the area for the lock tongue. If necessary, using a thin brush, clean out the debris that has accumulated there, due to which the hatch door cannot close.

Mechanical damage to door hardware

The side loops are checked first. Due to improper installation of the washing machine, the hinges begin to sag, which is why the door latch does not fit into the lock hole. To fix the problem, you need to check the level of the washing machine body, tighten the hinges, and adjust the position of the hatch door.

To return the retaining pin to its place, the hatch door will have to be disassembled:

• unscrew the two fasteners and remove the door from the body;
• Unscrew the fasteners connecting the two halves of the door;
• Carefully release the latches and remove the outer part of the door (the one with the glass);
• using a flat-head screwdriver, push the pin into its original place;
• Assemble the hatch doors in the reverse order and secure them to the body of the washing machine.

If the hatch door closes without much difficulty, but the characteristic locking click is not heard when the door is closed, then most likely the special plastic guide has worn out.

Replacing it is not difficult: just disassemble the hatch doors (the algorithm of actions is described earlier) and replace the worn element with a new guide of similar size.

UBL is out of order

The Atlant washing machine is equipped with an electronic device that blocks the hatch door (UBL). When the washing program starts, the control module sends a signal to the plates of the device.

Expanding, they press on the lever that blocks the loading hatch door. Natural wear of the plates, damage to the contacts as a result of a short circuit or mechanical damage renders the UBL unusable, which is indicated by the Atlant washing machine with the “door” error.

A multimeter will help confirm assumptions that the blocker is broken (the device must first be dismantled).

In order to remove the UBL from the washing machine body, necessary:

• carefully bend the edges of the rubber seal of the hatch, pry it up with a thin screwdriver, and remove the metal clamp;
• insert the rubber seal inside the drum;
• Unscrew the fasteners holding the UBL (located on the right side of the loading hatch);
• disconnect the wiring fasteners. Remove the lock from the washing machine body.

Photographing the location of the wiring on the UBL will simplify the process of connecting a new blocking device.

The lock is removed, you can begin the testing procedure:

• set the multimeter to “Resistance” mode;
• apply probes to the phase and zero contact.

The readings on the display have changed - the blocker is working; if not, the UBL must be replaced.

Installing a new hatch door lock is easy. The main thing is to choose the right UBL in accordance with the model of the washing machine (information is indicated on the plate attached to the rear panel of the case).

Based on the photo, connect the wiring of the new lock, fix the UBL into the washing machine body, and return the metal clamp of the rubber cuff to its original place.

Malfunctions of the control unit

You can independently determine that the possible cause of the “door” error lies in the control unit only visually.

To get to the module you need to:

• remove the powder receptacle;
• remove the cover;
• Unscrew the fasteners holding the control panel;
• carefully inspect the electronic board (do not touch the wiring). You should be wary of: condensation (humidity is the first cause of a short circuit), dark spots (traces of exposure to high temperatures), bloated barrels and damaged electrical circuit tracks.

Otherwise, it is better to entrust the restoration (or replacement) of the control unit to the professionals of the service center.

Repairing the control board - in the video:

Call the master

A professional technician can fix the “door” error in an Atlant washing machine as quickly as possible. You can find the phone number of the specialist you need through your family and friends. (“word of mouth” is a reliable way to avoid meeting scammers). Alternatively, the specialist’s contacts can be found through Internet search engines (when choosing a specialist, it is important to pay attention to the number of positive reviews).

When submitting an application, you must: provide the exact model of the washing machine, the year of manufacture of the household appliance, and describe the problem in as much detail as possible.

Depending on what exactly triggered the “door” error in the Atlant washing machine, the cost of repairs carried out by a service center technician varies from 800 rubles. up to 2100 rub. The urgency of repairs and the cost of parts to be replaced increase the cost of repair work.

How to prevent it in the future?

Avoid problems with closing the hatch door of the Atlant washing machine A few recommendations will help:

1. When loading the drum, it is important to monitor the amount of dirty laundry. Overload accelerates wear of the internal elements of the washing machine (including hinges and door lock), and can lead to deformation of the rubber cuff.
2. Do not place heavy objects on the washing machine (constant pressure deforms the walls of the housing).
3. Do not hang wet, heavy laundry on the hatch door (excessive pressure causes the hinges to sag).

Careful use of the washing machine in accordance with the manufacturer’s recommendations helps prevent the occurrence of the “door” error and maximize the period of uninterrupted operation of the household appliance.

Adviсe

An emergency way to restore the functionality of the Atlant washing machine is to reboot. It is enough to turn off the washing machine from the network for ten to fifteen minutes, and then restart it duty cycle.

If problems with closing the door were caused by a failure in the system, the “Door” error will disappear; if not, it is necessary to carry out a more detailed diagnosis of the problem that has arisen.

Conclusion

Most often, the cause of “door” errors in the Atlant washing machine lies in a faulty UBL or worn-out hatch door elements. It is not difficult to fix such problems yourself (it is enough to first study a little theory).

If independent repairs do not give positive results, then most likely the error is caused by a malfunction of the control module. In this case, it is better to entrust the repair of household appliances to professionals.