Why does the Atlant washing machine display error F9, what should I do in this situation?
Budget-friendly, but at the same time stylish and quite functional, washing machines from Belarus Atlant are quite popular among buyers.
As with any household appliance, malfunctions may occur with these devices and an error code will be displayed on the display. One possible situation is F9.
Content
Decoding the F9 code
Coded F9 indicates a malfunction of the device that affects the functionality of the tachogenerator. The washing machine fails to accelerate the drum to the required speed, and the control module, which coordinates the operation of the entire washing machine, interrupts these attempts by displaying an error message.
This could be one of the options:
- complete lack of movement;
- sluggish twitching;
- a short rotation in one direction, after which it stops;
- too active rotation, more characteristic of a spin.
In automatic Atlant washing machines that do not have a display, information about a failure is conveyed to the user by the glow of a certain combination of indicators.
Analogous to F9 for them The following signals are used:
- For machines in the OptimaControl line, these are “Prewash” and the “Water Stop” light.
- For devices of the SoftControl line, this is “Wash” plus the “Spin” glow.
A failure with F9 in Atlant can occur at any stage of processing items in an automatic washing machine.
Causes and remedies
In most cases, F9 indicates a problem with the equipment that requires repair. But sometimes the reason may lie in a random coincidence or in a user error.
Overload
Sometimes the user tries to tamp the drum as much as possible. This can not only significantly deteriorate the quality of washing, but also creates an increased load on the machine components.
If the Atlanta drum is filled to capacity, and the weight of the loaded items is clearly greater than that recommended by the equipment manufacturer, the operation may stop and F9 will be issued.
The solution to the problem is to remove some of the laundry from the drum and start the wash again.
Imbalance
Uneven distribution of items in the drum may be one of the reasons F9. This situation can arise when things are knocked into a tight lump, which the machine itself cannot distribute evenly throughout the drum. The solution to the problem is to manually distribute the laundry evenly.
One-time random failure
A sudden power surge or other unexpected reason can cause the washing machine to freeze and display an error code on the display. If this situation was not caused by a breakdown, but by a random combination of circumstances, then a reboot will help.
Control unit failure
If the elements on the board that are involved in the operation of the motor fail, the washing machine may stop after drawing water and freeze without rotating the drum. Its movement will not occur at all or will become insignificant, and only in one direction.
If the control module breaks down, it is dismantled. Burnt out elements are replaced. If this unit is severely damaged, it is completely replaced.
The firmware of the electronic unit has gone wrong
If the board's firmware is faulty, it needs to be reflashed. To do this, remove the unit from the washing machine and work with it separately.
The tachometer is broken
If the element that controls the rotation speed of the drum fails, the Atlant washing machine does not wash. The drum does not move.
The tachometer is dismantled for diagnostics.. To do this, disconnect the wires and unscrew the screws that hold it in place. The new sensor is installed in place of the removed one, and all wires are connected.
Engine brush wear
When the motor brushes wear out, the washing machine does not perform a full spin cycle according to the set parameters. Over time, the situation worsens and the drum does not rotate even during the washing phase.
This situation is due to the fact that with prolonged use the brushes lose their original size., and the electromagnetic field necessary for the operation of the device is not created in the engine. When the brushes are completely worn out, the rotation of the drum stops completely.
Since brushes are considered consumables, they should be replaced with new ones. To do this, the motor is removed from the mounting socket.
Wiring problems
In automatic washing machines, there are a lot of wires running inside the body that connect the working units. Damage to any part of the electrical circuit leads to malfunctions of the washing machine.
If the damage concerns the motor chain, the drum may not rotate., or it will be carried out in jerks. As a result, the control module generates an error code F9, which is displayed on the display.
The motor broke down
Motor failure is a serious breakdown, followed by expensive repairs or complete replacement of the engine. Damage may include winding breakage, electrical leakage to the housing, etc.
The motor is responsible for rotating the drum. When the motor is damaged, the washing machine can only draw water, but the wash itself does not start. If the motor is seriously damaged, it is usually simply replaced.
Video review of the Atlant washing machine engine:
Call the master
It is not always possible to cope with a breakdown of the Atlant washing machine on your own. If simple reasons are not confirmed, and diagnostics of the condition of the motor and other components is required, it is better to entrust the work to a professional.
The cost of the technician’s work depends on the complexity of the repair and the company’s price list. The average prices for repairs in the capital are as follows:
- motor repair/replacement – from RUB 2,100;
- wiring repair - from 1600 rubles;
- replacement of brushes - from 1500 rubles;
- replacement of tachometer – from 2100 rubles;
- repair/reflashing of the control unit – from 2100 rubles.
The cost of new parts is paid separately by the customer. If repairs to other components of the device are required along the way, the cost of the technician’s work increases.
Prevention measures
In order not to encounter the problem of failures with the issuance of F9, It is necessary to remember about preventive measures:
Do not overload the machine drum when storing things.- If power surges are a common occurrence in your home, it is advisable to think about buying a voltage stabilizer.
- You should not run wash after wash without allowing the machine to rest.
- If any water leakage into the housing is detected, the device must be repaired, since ignoring this circumstance provokes corrosion and can lead to very serious damage and current flow to the housing.
Recommendations
In cases where you had to encounter error F9 on a washing machine, The following recommendations may help:
- In some cases, repairing parts may not be practical and replacement will be better. This applies, for example, to engine repairs.
- The minimum length of brushes when they can still maintain their functionality is 1 cm.
- You can only open the case when the electricity is turned off and the water supply tap to the washing machine is closed.
- Machines that are under warranty can only be repaired by service center technicians.
Conclusion
Error F9 on the display of the Atlant washing machine is a failure that can be eliminated by repair.You can do it yourself or seek help from a specialized company.
