Powerful, lightweight, maneuverable - the Resanta SB 4000 snow blower and its characteristics

The Resanta SB 4000 snow blower is a powerful machine for clearing roads of snow. With its help, you can clear both narrow sidewalks and large parking lots and driveways.

It can easily cope even with those snowdrifts that a shovel cannot handle.

Read the article about what the Resanta SB 4000 model is, where it is assembled, what advantages and disadvantages it has, and more.

Model and manufacturer

The Resanta SB 4000 snow blower is designed for work in medium-sized areas. With a motor power of more than 5,145 W, the equipment is capable of clearing an area of ​​about 600 square meters in an hour. m.

This is quite enough for owners:

• country houses,
• garages,
• small parking lots,
• shops and other objects for approaching or accessing which snow must be removed independently.

The model includes:

• gasoline four-stroke engine;
• gearbox with 4 rear and 2 forward speeds;
• metal auger, skids, bucket;
• fuel tank;
• handles, levers and control buttons;
• starter;
• wheels with deep tread;
• metal snow discharge chute with lever drive;
• blade (attached to the back of the bucket);
• mounting kit and product data sheet.

The production of the Resanta SB 4000 snow blower is carried out by a Russian company that owns, among other things, other brands of snow removal equipment (HUTER). The Resanta brand itself was founded in 1993 in Latvia.It is widespread in the CIS countries and Russia.

Advantages and disadvantages

Advantages of the model Resanta SB 4000:

1. Engine 7.0 HP The motor's potential is sufficient to clear large areas of snow.
2. Several forward and reverse speeds, thanks to which it will be possible to optimize the operation of the equipment without putting extra effort into moving it forward or backward.
3. The snow removal width is 56 cm. This is the average value for most snow blowers. The equipment remains maneuverable, it is easy to remove snow from pedestrian paths, but larger areas will also be cleared in a short time.
4. Economical consumption of fuel and lubricants. The equipment runs on AI-92 gasoline; the tank volume is 3.0 liters; thanks to this size, it does not have to be refilled after each session.
5. The light weight of the product (65 kg) allows even a woman to operate the machine with ease.
6. High cross-country ability. The wheels are equipped with deep tread, thanks to which the equipment does not slip even on ice.
7. The snow throw range is up to 15 m, which is enough to work under standard conditions.
8. A durable metal chute for throwing out snow that is not susceptible to mechanical damage.
9. Manufacturer's warranty – 3 years of service.

Flaws:

• lack of headlights for comfortable work in the evening;
• lack of an electric starter, which makes it easy to start the engine even in severe frost;
• no heated handles;
• overpaying for brand awareness - you can find similar models on sale, but at a lower price, for example, the Huter SGC 4000 snow blower has similar characteristics, but costs 4000-5000 less.

Assembly

The product is delivered to the consumer in partially disassembled form, therefore Before starting work, you need to perform some steps yourself:

1. Place the lower part of the control handle on the machine body and secure it with bolts and keys.
2. Insert the upper part of the handle into the lower part.
3. Use bolts to secure the handles.
4. Secure the wheel and auger drive cables to the levers.
5. Tighten the auger and wheel cables using a screw. It is twisted clockwise.
6. Install and secure the gear shift lever.
7. Mount the snow discharge chute on the frame and secure it with bolts.
8. Install the lever responsible for turning the chute.
9. Put on the limit skis so that the auger does not come into contact with the surface.

If any difficulties arise during the assembly process, you can always contact the retail outlet, a sales consultant or an official service center.

Launch and use

Before putting the equipment into operation, it is necessary to fill the fuel tank with gasoline (grade AI-92) and measure the oil level in the engine. If necessary, fuel and lubricants are topped up. Since the Resanta SB 4000 model is not equipped with an electric starter, the motor is activated manually.

The procedure is as follows:

• open the fuel valve (located under the air damper);
• leave the choke valve closed when starting a cold engine;
• set the throttle control lever to the “Turtle” position;
• press the primer 5-6 times to pump fuel into the carburetor;
• pull the starter cord up until resistance is felt - then jerk it sharply to start the engine; when it starts, slowly return the starter handle to its original position;
• as the engine warms up, open the air damper;
• start clearing snow.

Features of use snow blower Resanta:

1. Switching speeds is done by moving the lever to the desired position. "1" is the highest speed and "4" is the lowest. The “R” position puts the machine in reverse motion.
2. To start the movement, press and hold the lever located on the right side.
3. To start the rotation of the auger, press the handle located on the left.
4. When turning off the snow blower, release the lever responsible for rotating the wheels, and then for rotating the drive. All that remains is to move the ignition knob to the Off position.
5. To remove excess moisture, the equipment should work for about 5 minutes, after which you can turn off the engine.

It is also permissible to rinse the equipment with a stream of water, but after this all elements must dry completely.

Maintenance and storage

Service Features snow blower Resanta SB 4000:

1. Check the engine oil level regularly. This is done using a probe. If the equipment is used for the first time, the average consumption will be 0.6 liters. For the motor of the Resanta SB 4000 snow blower, 5w mineral oil is used. The oil is changed every 25 hours of operation.
2. Before sending for long-term storage (for a period of 30 days), the tank must be completely drained of gasoline.
3. All metal parts are wiped with an oily cloth.
4. Regularly check the tension of the cables and inflate the tires.
5. Every 25 hours of operation, you need to add 20-30 g of Litol 24 lubricant to the gearbox. Clean the spark plug and air filter at the same intervals.

A warm and dry room, without a lot of dust, is suitable for storing the Resanta SB 4000 snow blower. You can additionally cover the equipment with a cloth.

Where can I buy?

You can purchase a Resanta SB 4000 snow blower in stores that retail electronics and equipment. You can also place an order in the online market. This method is preferable if the required model is not available or the car must be delivered to your home.

Price

The price of the Resanta SB snow blower is 4000 – 46,000 rubles. This is an average cost and may vary., depending on the markup made by the retail outlet.

Owner reviews

Users respond positively to the Resanta SB 4000 snow blower. People like the machine's maneuverability and ease of control.

They note that Thanks to large wheels with deep tread, cleaning is convenient even in icy conditions. The auger is made of durable metal, so equipment owners can easily clear compacted snow from paths.

Among the shortcomings are the inconvenient location of the handles, the lack of thermal insulation on the handles, which is why your hands quickly freeze, slow reverse gear and rapid wear of the auger shaft.

Alternatives

As an alternative to the Resanta SB 4000 model The following snowblowers may be considered:

• Huter SGC 4000;
• Hyundai S 5556;
• DDE ST6561L, etc.

A review of the Huter SGC 4000 snow blower is presented in this article, Hyundai S 5556 - in this.

Video on the topic of the article

Video review of the Resanta SB 4000 snow blower:

Conclusion

The Resanta SB 4000 snow blower easily copes with clearing paths and other areas. Its power is enough even for parking lots and parking lots. The equipment is not afraid of difficult terrain, since the deep tread allows it to maneuver with ease.