The optimal solution for owners of country and private houses: petrol self-propelled snow blower Hyundai S 5556

A snow blower is an extremely useful acquisition for owners of territories whose area is 50 m2 or more. With its help, you can save time and effort on clearing snow.

An excellent option would be the Hyundai S 5556 snow blower. Read about what this model is, what its advantages and disadvantages are, how to use it and where to buy it.

Model and manufacturer

The Hyundai S 5556 snow blower has excellent cross-country ability and maneuverability. Its compact dimensions allow you to clear snow from paths and sidewalks. At the same time, the working width is sufficient to quickly clear open spaces.

It is purchased by owners whose garages are located away from the main road, as well as owners of small parking lots and commercial properties with a compact adjacent territory.

The equipment is supplied in the following configuration:

1. Gasoline engine ICW160 with a power of 5.5 liters. With. With such productivity, it will be possible to clear about 500-600 m2 in an hour.
2. Fuel tank with a volume of 3.6 liters.
3. Transmission. It has 4 forward and 1 reverse speeds.
4. Metal screws.
5. Snow scraper 530 mm wide and 510 mm deep.
6. Gutter It's rotating. You can change the snow throw direction and distance.
7. Wheels.

The snow blower weighs 57 kg.For a snowblower, this weight is optimal. The model is produced by Hyundai Power Products. This is a large manufacturer of gardening equipment, which is successfully sold all over the world.

Pros and cons of a Hyundai snow blower

Advantages snow blower Hyundai S 5556:

• a powerful motor that is assembled at the same factory as the snow blower - this guarantees its reliability and durability;
• economical consumption of gasoline and oil, provided that the operating instructions are followed;
• ergonomics - all levers are freely accessible, making it comfortable to operate the equipment;
• variable snow throw range - maximum distance - 11 m;
• X-TRAC tires - they are designed specifically for snow removal equipment, have a special tread profile that provides high-quality traction on snow-covered surfaces;
• less noisy operation - when the motor is on, the sound reaches 97 dB, which is 10-15 dB quieter than other snow blowers.

The disadvantages of the machine include:

• lack of headlights, which may require additional lighting in the evening;
• lack of heated handles - you will have to work with gloves;
• high cost - you can find snow blowers on sale with similar parameters, but from other manufacturers at a lower price.

Assembly

To start using the snow blower, you need to assemble it. This is not difficult to do, since the machine is delivered almost ready-made.

The assembly algorithm is as follows:

1. Disconnect the fasteners that should hold the cable. It is located on the handle.
2. Take the top panel and install it on the snow blower. The parts are adjusted and secured to each other.
3. The cables are first secured to the lower part, after which they are led to the levers on the right and left handles.Fixation is carried out using cotter pins.
4. Mount the gear shift rod with the shift lever at the bottom of the machine. A latch pin is used for fixation.
5. Collect the snow discharge chute. First, bracket-plates are installed on it, after which the gutter itself is mounted on the outlet pipe. The structure is fixed.

Preparing for launch

To start the snow blower, the following steps must be taken:

1. Pour gasoline into the fuel tank. Refueling is carried out on a cold engine, away from sources of fire. If fuel gets on machine parts, wipe it off immediately. AI-92 gasoline is used for refueling.
2. Fill with engine oil. Its level is measured using a dipstick. The equipment must stand on a flat surface. The oil level should be between the H and L marks on the dipstick.
3. Set the range and direction of snow throw.
4. Adjust the height of the work surface blades. To do this, the skids are raised up or lowered down.
5. Perform a visual inspection of the equipment, check the serviceability of all systems and the strength of the fastenings.

How to launch and use?

Starting the engine of the Hyundai S 5556 snow blower carried out according to the algorithm:

1. Turn the throttle to the CHOKE throttle position when starting a cold engine. If it is warm, the damper should remain in the RUN position.
2. Press the fuel primer 2-3 times (for a cold engine). If the engine is warm, then pumping may be necessary only at low air temperatures (from -10 degrees), or if it was not possible to start it the first time.
3. Slowly pull the starter cord handle. As soon as resistance is felt, quickly pull the cord 3-4 times with a continuous hand stroke. This will allow the engine to start running.If the engine does not start, repeat the procedure again.
4. Release the starter cord.
5. As the engine warms up, open the throttle control, moving it to the RUN position. Typically, this procedure takes about a minute.
6. Before you start clearing snow, you need to let the engine run so that it reaches the desired temperature.
7. When cleaning is completed, the movement is stopped by releasing all levers. Leave the engine to run for 3-5 minutes.
8. To turn off the engine, move the ignition lever to the OFF position.

Features of operation snow blower Hyundai S 5556:

• to achieve better results, snow removal should be carried out immediately after it falls;
• when passing a new lane, the previous path must be slightly blocked;
• remove snow downwind, if possible;
• there should be no stones, sticks or other debris in the path of the equipment;
• You need to hold the car with both hands;
• if the snow depth does not exceed 20 cm, then cleaning is carried out at medium speed;
• it is better to refuse to remove wet sticky snow so that it does not lead to clogging of the chute and blocking of the auger shaft;
• large blocks of ice cannot be crushed using an auger;
• It is possible to work on slopes whose angle does not exceed 20 degrees.

Maintenance and storage

To reduce the risk of premature breakdown of equipment, it must be properly maintained. Main events:

1. Snow, ice and other contaminants are removed after each use of the device.
2. The screw is cleaned using a special spatula. It comes included. It can be found on the back of the case.
3. Before starting the snow blower, be sure to check the oil level in the engine. It is replaced at least once a season.The used lubricant is completely drained.
4. The spark plug, drive axle bearings and cables are changed every 300 hours. The fuel tank is flushed at the same frequency.
5. If the spark plug shows no signs of wear, cracks or chips, then it is enough to clean it from dirt and insert it into place.

Where to buy, at what price?

You can purchase a snow blower at retail stores that sell household appliances and electronics.

However, you may encounter the problem of the unavailability of the Hyundai S 5556 model. Expensive units are not always available.

In this case the order can be placed online, on a major online platform.

The average cost of a Hyundai S 5556 snow blower is 60,000 rubles. It can be higher if the seller puts a large markup and lower if at the time of purchase there are promotions or discounts at the outlet. However, there should not be significant differences.

Reviews

Owners of the Hyundai S 5556 snow blower speak mostly positively about the equipment. They note that the machine is compact, easy to move and store.

The motor power is sufficient for cleaning small areas. The engine starts easily. The equipment does a good job of clearing snow.

Disadvantages include the frozen snow discharge pipe. Some users found the process of assembling the unit difficult.

Alternatives

As an alternative to Hyundai S 5556 The following snow blowers may be considered:

• CHAMPION ST556;
• Husqvarna ST124;
• Huter SGC 4100L.

Review of the snow blower Champion ST556 presented in this article, Husqvarna ST124 - in this.

Conclusion

The Hyundai S 5556 snow blower will become an indispensable assistant when clearing snow in small areas. The model is easy to operate, equipped with an economical motor, and if you follow the operating instructions, it will last a long time.