Review of Husqvarna 124 petrol snow blower: characteristics, cost, customer opinions

Winter is a time of additional worries for owners of home and other areas. To prevent snow removal from taking a lot of time and effort, you should take care of purchasing a snow blower in advance.

The range of snow removal equipment is varied, which makes choosing difficult. The article will review the Husqvarna 124 snow blower model, describe its advantages and disadvantages, operating features, and also provide reviews from real users.

What model is the Husqvarna snow blower?

The Husqvarna ST 124 snow blower is designed to clear snow from walkways, sidewalks, driveways, parking lots and more.

snow blower represented by the following elements:

• augers with switch, auger housing and skids;
• control Panel;
• chute with a rotating mechanism;
• four-stroke gasoline engine with a power of 6 liters. With.;
• electric starter;
• levers - changing speeds, turning on the speed, rotating the auger, adjusting the rotation of the chute;
• wheels with tire diameter of 13 inches;
• fuel tank with a volume of 2.2 liters.

The Swedish company Husqvarna FB produces snow removal equipment. It was founded back in 1689. Today there are more than 18,000 dealers worldwide.

There are factories in:

• China,
• France,
• Sweden,
• Poland and other countries.

Advantages and disadvantages

Advantages of the model snow blower Husqvarna ST 124:

1. Durable metal auger with large teeth for better snow capture.
2. Possibility of adjusting the snow throw distance up to 12 m.
3. Engine from a snow removal equipment manufacturer. Its power is sufficient for cleaning medium-sized areas.
4. High cross-country ability, which is achieved due to large wheels with deep tread.
5. Convenient engine starting thanks to the electric starter.
6. Quick snow removal. In one pass it is possible to clear a path up to 61 cm wide.

Flaws:

1. Noisy work. When the engine is turned on, the sound level reaches 102 dB, which is comparable to the noise from a switched on chainsaw.
2. Lack of a headlight, which would be useful when cleaning in the evening.
3. The impressive weight of the product is 78.5 kg.

Assembly

To assemble the snow blower and prepare it for use, you need to do the following:

1. Install the handles. First, mount the lower part into the holes on each side of the housing. The upper handle is then connected to the control panel and lower handle. They are fixed with bolts.
2. The gutter deflector is assembled, the rotating mechanism disk and limiters are attached.
3. Install the gutter turning mechanism. First, attach its front part, mount a plastic bushing on it, then mount the rear part of the rotating mechanism. It is connected using a hex nut with holes in the handle.
4. Assemble the speed control rod. The long curved end is installed on the control panel, secured with a connecting rod spring, a flat spacer and a cotter pin. Pull up the shift connecting plate and install the short curved end of the rod.
5. Assemble the auger and drive cables.Mount two threaded cable bolts on the right and left handles. Attach the cables to the threaded bolts, fix the left and right threaded nuts, and the threaded bolt. The upper part of the brass lock nut must coincide with the mark on the thread, after which the cable is secured with it.

Preparing for launch

Before putting the equipment into operation, The following preparations must be made:

1. Adding oil to the engine. Remove the cap from the tank and remove the dipstick. Pour in enough oil to reach the top mark. Return the cover to its place.
2. Adding fuel to the tank. Open the lid slowly to release the pressure. Pour gasoline inside. If some of it spills past, wipe the tank with a rag and allow it to dry. Tighten the lid tightly. Before starting, the equipment must be rolled back at least 3 m from the refueling site.
3. Adjust the gutter deflector. By turning the handle clockwise, the chute is directed to the right, and by turning it counterclockwise, it is directed to the left. To adjust the snow throw range, the corner deflector is moved down or up.

How to launch and use?

To start the Husqvarna ST 124 snow blower engine, perform the following actions:

• release the drive switch, set the speed lever to position 1;
• turn the fuel switch to the “ON” position;
• close the air damper;
• turn on the key by pressing the button;
• press the primer 1 to 3 times to start the booster pump; it must be activated if the equipment is started in cold weather;
• pull the starter handle and then slowly return it to its original position;
• leave the engine idling for about 30 seconds;
• After the engine warms up, open the throttle.

In addition to manually starting the starter, you can use an electric analogue. It is designed for 230 V. The extension cord is connected to the machine after starting the booster pump.

Features of use snow blower Husqvarna ST 124:

• Before each start, it is necessary to check the oil level in the engine and top it up;
• ensure the cleanliness of the area being cleaned; there should be no animals or people in the work area;
• To achieve optimal results, the engine must be running at full power;
• It is advisable to start clearing the area immediately after precipitation;
• it is recommended to direct the chute from which the snow is thrown downwind;
• if a flat surface is to be cleared, then the height of the protective plates should be 6 mm from the ground;
• as the scraper wears out, it can be turned over; replacement is required only after wear on both sides;
• The gutter and deflector must be cleaned after each use.

To stop the equipment, release the drive and auger switch and move the fuel switch lever to the “Off” position.

Maintenance and storage

Features of storage and maintenance snow blower Husqvarna ST 124:

1. Before each use, check the secure fit of the nuts and bolts and assess the oil level.
2. The oil is changed every first 20, 50, 100 hours of operation. It can then be changed every 100 hours.
3. Tire pressure should be assessed every 50 hours.
4. Every 100 hours, inspect and, if necessary, replace the spark plug.Its check is required in a situation where the engine runs poorly or does not start at all.
5. The plastic elements of the machine are wiped with a dry, clean cloth, grass, leaves and dirt are removed with a brush. The unit must not be washed with an automatic washer.
6. Before sending for long-term storage, gasoline is drained from the tank, and fuel is also removed from the carburetor. The room should be dry and warm. To protect equipment from dust, it is covered with cloth.

Where can I buy?

You can buy the Husqvarna ST 124 snow blower at retail stores that sell household appliances and electronics. The machines are also found in retail outlets with gardening and other equipment.

Price

The cost of the Husqvarna ST 124 snow blower model will vary from store to store. Average price – 70,000 rubles.

Owner reviews

Users respond positively to the Husqvarna ST 124 model.

They note that all the technical characteristics stated in the instructions correspond to reality. The engine starts quickly and does not cause problems even when used in the cold.

A separate advantage is the presence of an electric starter. In general, people are satisfied with the purchase and do not see any shortcomings in the technology.

Alternatives

As an alternative to the Husqvarna ST 124, You can consider the equipment of the following brands:

• Hyundai S 6561;
• Huter SGC 4000;
• CHAMPION ST656BS and others.

A review of the Huter SGC 4000 snow blower is presented in this article.

Video on the topic of the article

Video review of the Husqvarna 124 snow blower:

Conclusion

The Husqvarna ST 124 snow blower is a reliable piece of equipment that is assembled to strict Swedish standards. The machines are durable, and most importantly, they do an excellent job of clearing snow from the area.