Characteristics and features of the Husqvarna ST 224 petrol self-propelled snow blower

Removing snow from paths and areas before entering a yard or garage may no longer be a problem in a snowy winter.

Hand tools are being replaced by modern self-propelled snow blowers, such as the Husqvarna ST 224.

A review of the Husqvarna petrol snow blower is presented in the article.

Description of the Husqvarna snow blower

Husqvarna snow blowers are equipment made in the USA. In its products, the company organically combines modern technologies, modern design and excellent quality components. With proper use, snow covers of this brand last for years - without breakdowns or serious complaints from users.

In the snowfield it is possible to select the speed of movement (6 forward and 1 reverse). The snow throwing range is up to 10 meters. The size of the auger casing (bucket) is 61 x 58.5 cm. The impeller involved in the process has 3 blades. Transmission type - friction disc.

For ease of use, it is possible to vary the height of the handle. 4 positions are possible. The weight of the Husqvarna ST 224 itself is 90 kg.

Advantages and disadvantages

The advantages of the Husqvarna ST 224 snowfield include the following factors:

• reliability;
• high quality;
• ability to change the height of the handle;
• high performance;
• two-stage cleaning system;
• snow capture – 0.6 m;
• operator panel – made of metal;
• wheels with deep tread for better traction;
• good maneuverability;
• the deflector and socket can be controlled from the top panel;
• LED lights with metal housing;
• wheel unlocking system;
• There is a manual and electric starter.

Minuses snow blower latest build version (from 2020):

• high price;
• no heated grips.

Comparison of the updated version of the Husqvarna ST 224 snow blower with the previous one, which was produced before 2020:

Assembly

The buyer receives a Husqvarna ST 224 in a package. The snow blower is delivered practically assembled.

Procedure for unpacking and assembly:

1. Remove individual packaged parts from the box.
2. Cut the packaging box itself along the edges so that the entire cardboard falls to the floor.
3. Unscrew the screws that connect the auger housing to the tray.
4. Finish unpacking.
5. Take out the ST 224 snow thrower.
6. Raise the upper part of the handle, bringing it to the working position.
7. Secure the handle fastener.
8. Install a funnel through which snow is thrown away.
9. Install the deflector control mechanism.
10. Check tire pressure. Equipment comes from the factory with heavily inflated tires, the pressure of which may need to be reduced before use - up to 14-17 PSI.

Preparing for launch

Before you start using your Husqvarna snow blower, you need to make sure that the machine is ready for use. To make this snowfield you need:

• inspect,
• check the condition of the screws,
• reliability of fastenings,
• fill with gasoline.

Also, before each use of the Husqvarna ST 224, the oil level is checked. For these purposes, a probe is used, which also serves as a cover.

Taking into account the type of surface to be cleaned, it is necessary to adjust the supporting side plates. The kit with the snowball includes a wrench, which will be convenient to use. There are two support plates in the Husqvarna ST 224 snowfield. They are located on both sides of the casing.

If the surface to be cleaned is flat, the height of the casing can be set to the minimum value. This will allow you to remove and discard snow more efficiently. The minimum distance is about 3 mm. If the surface is uneven, the gap should be larger.

If during operation it is necessary to change the position settings of the support plates, the snow blower must first be stopped and the engine turned off. It is not advisable to clean gravel paths, as well as surfaces with a lot of stones and debris, with a snow blower.

Preparing for launch includes points not directly related to the Husqvarna ST 224 snow thrower:

• care must be taken to ensure that there are no people or animals in the path of the device;
• It is necessary to ensure that the movement of self-propelled equipment is not interfered with by foreign objects.

Exploitation

Operation of the Husqvarna ST 224 snow blower includes starting, direct operation and subsequent stopping.

Launch

The Husqvarna snow blower can be started manually or using an electric starter from an outlet. This allows you to launch a snowfield without any difficulties in any, even frosty, weather.

Launch of Husqvarna snowfield with an electric starter "cold start":

1. Insert the key into the special hole until it clicks.
2. Set the throttle to the “FAST” position.
3. Move the “On/Off” switch to the “ON” position.
4. Move the air damper to the “FULL” position.
5. Press the fuel pump button three times.
6. Connect the extension cord.
7. Press the starter.
8. After the engine starts, the start button must be immediately released.
9. Move the choke lever to “OFF”.
10. Disconnect the extension cord.
11. Allow the engine to warm up.

Starting the Husqvarna ST 224 using an electric starter (warm start) is done in the same way, but with the choke closed.

Cold starting a Husqvarna using a mechanical starter:

1. Insert key.
2. Throttle valve to “FAST” position.
3. “On-off” - to the “ON” position.
4. The air damper is in the “FULL” position.
5. Press 3 times on fuel pumping.
6. Pull the recoil starter vigorously and release it slowly so that the cord does not rewind too quickly.
7. Once the engine has started, the starter will release.
8. The choke lever is set to “OFF”.
9. After the engine has warmed up, start working.

A warm start of the Husqvarna ST 224 using a mechanical starter is carried out in a similar way, but with the choke closed.

Job

Husqvarna ST 224 snow removal in progress The following recommendations will help:

• during operation, the throttle valve must be open;
• When clearing wet snow, the speed should be low;
• when passing the next lane, it is advisable to use a snow blower to slightly grab the previous one, which has already been cleared;
• It is recommended to throw snow in the wind.

When completing the work, the snowfield needs to be cleaned and wiped dry.

Stop

After clearing the area, the Husqvarna ST 224 snow blower you need to turn it off correctly, following the following sequence of actions:

• release the travel control lever;
• release the auger control lever;
• move the engine to the “STOP” position;
• remove the safe start key.

Before stopping, the engine must be run for a short time to allow the moisture to evaporate.

Maintenance and storage

Husqvarna snow removal equipment requires high-quality regular maintenance and proper storage.

Frequency of care operations for the Husqvarna snow blower:

Where to buy, at what price?

Husqvarna ST 224 is a fairly popular snow blower model that has been produced for several years.You can purchase the device in an online store, in hypermarkets and in specialized stores that sell household appliances and soda.

The average price for ST 224 is from 120,000 rubles. In addition to the presented model, the manufacturer Husqvarna also produces other snow removal equipment with different characteristics, which allows you to choose a device based on your personal needs.

Customer Reviews

Reviews of Husqvarna ST 224 equipment are mostly positive; buyers are mostly satisfied with the purchase.

The strengths include the following:

• maneuverability;
• Ease of Management;
• It removes not only dry snow well, but also wet snow;
• economical fuel consumption;
• wheel locking;
• electric starter;
• good snow throwing range;
• bright headlights;
• powerful engine.

The disadvantages include:

• high price;
• when removing wet snow, the socket often becomes clogged;
• it is difficult to find spare parts if parts break;
• slow reverse;
• The device does not always cope with compacted snow;
• The new assembly does not have heated grips.

Alternatives

Along with snow blowers TM Husqvarna, snow removal equipment from other manufacturers has proven itself well.

Huter SGC 6000

Huter modification SGC 6000 runs on gasoline. This is a self-propelled semi-professional equipment with a large bucket and good power., which is suitable for private use. The cost of the snowfield is from 67,000 rubles.

Champion st762e

The Champion snow thrower is a reliable model. The snow plow has a powerful engine (6.5 hp), a metal auger with a large casing that ensures the capture of snow 0.62 m wide. The wheels are 13 inches, non-slip. There are lanterns. Product price – from 72,000 rubles.Review of the snow blower Champion ST 762 E presented in this article.

DAEWOO DAST 6560

Model DAST 6560 is a compact gasoline snow blower that designed to work in difficult climatic conditions at low temperatures. Engine - 6.5 hp, snow grip is ensured at 57 cm. Cost of equipment - from 60,000 rubles.

Video on the topic of the article

Video review of the Husqvarna ST 224 snowfield:

Conclusion

Designed for clearing snow around a private home, the Husqvarna ST 224 snow blower does its job well. A high-performance snow blower is a good option for clearing areas near garages and other buildings, paths and sidewalks.