Review of the Hyundai S 7066 snow blower: characteristics, advantages and disadvantages, customer opinions

Every year, snow blowers are gaining momentum in popularity not only among owners of large areas located near commercial properties, but also among residents of the private sector.

Indeed, this technique allows you to get rid of fallen precipitation and clear a passage or entrance to a building in a matter of minutes.

The article will talk about the Hyundai S 7066 snow blower, its advantages and disadvantages, assembly features, engine starting and more.

Model and manufacturer

The Hyundai S 7066 snow blower is equipment from the South Korean company Hyundai Power Products. Their products are distinguished by their variety and professional performance.

Equipment:

• gasoline engine ICW210 with a power of 7 liters. With.;
• 2 liter fuel tank;
• gearbox with 5 forward and 2 reverse speeds;
• blades with a snow grip width of 660 mm and a bucket depth of 510 mm;
• LED headlight;
• wheels with a diameter of 15 inches;
• metal screws;
• chute with a snow throw range of up to 11 m;
• control levers.

The total weight of the product is 86 kg.

Advantages and disadvantages

Among the advantages of the model snow blower Hyundai S 7066:

1. Powerful engine. In an hour, using technology, it will be possible to clean about 600-700 square meters. m of territory.
2. Manual and electric starter. This allows you to start the motor without problems at temperatures down to -30 degrees.
3. High cross-country ability.The tires are equipped with a deep tread, which provides high-quality grip on the surface.
4. Reduced cleaning time thanks to the large bucket.
5. A headlight that allows you to work more comfortably in the evening.
6. Heated handles. Snow removal can be done without gloves.
7. Carburetor heating.
8. Two-stage cleaning system.
9. Low noise level of 97 dB compared to other brands of snow blowers.
10. Rigid and durable frame.
11. Economical fuel and oil consumption.
12. Increased motor life, which is 2000 hours.

The disadvantages of the technology include:

• small volume of gasoline tank, which is only 2 liters;
• high cost compared to other models.

Assembly

Assembly of the Hyundai S 7066 model carried out as follows:

1. Remove all parts from the box, check the contents, and study the instructions.
2. Connect the travel control cable by hooking it to the left hole on the frame.
3. Connect the auger control cable to the right hole.
4. Use bolts to connect the instrument panel and the lower part of the handle.
5. Assemble the gear shift system.
6. Install the chute rotation mechanism. The rotation handles are connected to a flexible shaft. Secure the mechanism to the body.
7. Assemble the gutter, attach the fixation plates and secure the structure in its original place.
8. Install a cable that regulates the snow throw distance. Its end should be attached to the lever under the panel, and the beginning should be connected to the handle located on the control panel.

Preparing for launch

Before putting the equipment into operation, it is necessary to carry out preparatory measures. Their list includes:

1. Setting the direction of snow ejection. To do this, rotate the chute drive handle.
2. Setting the ejection range.To do this, move the L handle. To adjust the maximum range, set the tilt angle to 32-45 degrees.
3. Refueling. If this is the first time, then you need to remove the dustproof plastic insert from the tank opening. It is not needed for further operation of the equipment.

   AI-92 gasoline is used for refueling. It is poured through the neck to its lower edge. After filling, screw the cap tightly.

4. Oil filling. Its level is checked using a dipstick. It should be between marks H and L.
5. Check that the wire is securely attached to the spark plug.
6. Insert the ignition key into the lock slot.
7. Adjust the position of the scraper by changing the height of the guide skis.

How to launch and use?

To put the Hyundai S 7066 snow blower into operation, you need to do the following:

1. Connect the extension cord to the socket located on the motor. The equipment operates on a 230 volt network.
2. Open the damper. If the engine is cold, it should be in the CHOKE position. If the engine is warm, then it is left in the RUN position.
3. Press the fuel pump button 3 times. The primer is used only if the engine is cold or the outside temperature is below -10 degrees.
4. Press “Start” on the electric starter. As soon as the engine starts, the button is released.
5. Adjust the speed of revolutions. The "hare" picture indicates that the engine is running at full power.
6. As the engine warms up, open the throttle.
7. Let the engine run for 2-3 minutes to gain full power.
8. Set the gear shift lever to the desired position.
9. Clear the area of ​​snow. The auger is controlled by a handle on the right side and the snow blower is controlled by a handle on the left side.

Features of equipment operation:

• in order to quickly and effectively deal with snow removal, clearing should begin immediately after it falls;
• If possible, snow is removed downwind;
• to clean cover up to 20 cm high, they work at medium speeds; if the snow is dense or its depth is more than 20 cm, the unit must be moved slowly;
• It is not recommended to remove wet snow, as it will get stuck in the gutter and can lead to equipment breakdown. If a decision has been made to clear it, then you need to work at low speed, and also regularly clean the pipe using a special shovel; you should also avoid crushing ice and snow blocks;
• the maximum surface slope is 20 degrees - if it is greater, the snow blower is not used.

Storage and maintenance

Following the recommendations for servicing the device will extend its service life:

1. After each use, equipment must be cleaned of snow, ice and dirt.
2. It is recommended to change the oil after every 50 hours of operation. Its level is checked before each start.
3. All turning mechanisms are regularly lubricated.
4. The candle is inspected once a season. If there are no signs of damage, it is cleaned of dirt and returned to its place.
5. The fuel tank is flushed every 300 hours of operation. Before being sent for long-term storage, gasoline is drained.

For equipment, it is necessary to allocate enough space in a warm and dry room. To protect it from dust, it is covered with a cloth.

Where to buy, at what price?

Hyundai S 7066 snow blowers are sold in retail stores of household appliances and electronics. If the model you need is not in stock, you can always place an order online. Since the car is expensive, It’s better to make a purchase on proven platforms, for example, on Yandex Market.

The price of a snow blower may vary depending on where you purchase it. The average cost is 92,500 rubles. If it is significantly underestimated or overestimated, you need to check the reliability of the seller.

Reviews

Users respond mostly positively to the Hyundai S 7066 snow blower. They note:

• optimal engine power,
• ease of control,
• quick engine start.

The snow flies away to a specified distance and does not stick to the gutter. Separately, they note the high functionality of the equipment, the presence of headlights and heated handles.

Disadvantages include low ground clearance, unreliable belts and difficulties in purchasing original spare parts.

Alternatives

As an alternative to the Hyundai S 7066 snow blower The following models can be considered:

• Huter SGC 4800 (B).
• CHAMPION ST656.
• Denzel SBM 610 and others.

Review of the snow blower Champion ST656 presented in this article.

Conclusion

The Hyundai S 7066 snow blower does a good job of clearing small areas. This is a functional technique that is equipped with everything necessary for comfortable work. With its help, cleaning will be a pleasure and will not require much time and effort.