Step-by-step guide on how to change the belt on a Samsung washing machine

Washing machines of the Samsung brand are widely represented on the domestic market. Their popularity is associated with high reliability and the use of innovative technologies.

But even such equipment is not immune from possible breakdowns. One option is the need to replace the belt. This type of work is a moderately complex repair, and you can even do it yourself.

We will tell you in the article how to change the belt on a Samsung washing machine (remove the old one, put on a new one).

Signs that a part requires replacement

The need to replace a belt is not a common problem. Worn parts can become noticeable during prolonged or improper use of the washing machine.

The average service life of a washing machine belt is 6 years. The need for replacement during longer use is a normal situation.

Incorrect operation can accelerate wear of the part. with regular violation of the rules, for example, overloading of laundry.

In some cases, a problem with the drive belt may be indicated by a complete stop of the washing machine and the display of code E4, UE,UB. On machines not equipped with a display, all mode lights blink and the second temperature indicator from the top lights up.

A problem with the drive belt does not always cause an error code to appear.

• when water is filled into the drum and the motor is running, the drum does not rotate;
• the engine runs intermittently;
• after the start of the work cycle, despite the engine running, a freeze occurs;
• free rotation of the drum when the engine is not running.
• Uncharacteristic noise when washing.

If the part itself has a rough surface, pellets have formed on the surface and on the elements that are in contact with the belt, or delamination, then replacement is definitely needed. But this can only be determined through direct access.

Preparation for the process

Replacing the drive belt is carried out by partially disassembling the structure of the washing machine. Therefore, you need to prepare:

1. If there is water in the washing machine, it must be drained and the laundry must be removed from the drum.
2. Disconnect the device from all communications. You should not only turn off the machine with the button, but also remove the plug from the socket.
3. Move the machine so that you can access the back wall.
4. Prepare tools - a set of screwdrivers.

If the part has flown off for the first time and has no visual damage, it can simply be returned to its place without replacement.

Two belt access options

The belt can be accessed from the back wall of the washing machine, if it is removable, or through the top.

Procedure for machines with a removable back panel:

1. Unscrew all the screws that hold this cover in place.
2. Remove the cover. This allows you to get a good overview and convenience when replacing parts.

Otherwise, you will have to work through the top of the machine. For this, the steps will be as follows:

• unscrew the screws that hold the top cover;
• lightly push the cover towards the back wall so that it is removed from the grooves;
• remove the cover.

The immediate procedure for replacing the belt does not depend on the method of access to the part.

How to install a new one?

In order to replace the belt, you must first dismantle the old part and then install the new part. First you need to determine whether it is on the drum pulley. If it's not there, it's probably torn or fallen off completely and fallen to the bottom.

How to tension a new belt? Procedure for machines with a non-removable back side:

1. The car must be tilted towards itself so that the tank sag towards the hatch, and the gap between it and the rear wall becomes larger.
2. The old part must be pryed off with a screwdriver and removed from the pulley by sliding it.
3. While holding the belt, you need to rotate the pulley. This will help release the rubber or polyurethane part.
4. Use a flashlight to illuminate the area where you are working to see if any parts of the belt remain un-removed if it has become frayed due to wear. If they are detected, it is necessary to remove all fragments so that they do not interfere with normal operation in the future.
5. Place the new part onto the engine pulley. If you have to work through the top of the machine, you can use the help of a second person to grab the belt through the bottom. Or help yourself hook it by lowering it on a wire loop.
6. After the part is draped over the engine, you need to pull it onto the pulley grooves. This must be done by holding the belt itself taut and turning the pulley clockwise.
7. To make sure that the belt is “sat” in place, rotate the pulley.
8. Reassemble the washing machine in reverse order.
9. Run a test wash.

How to choose, how much to pay and where to buy?

The best option is to replace the belt with an original one that fully matches all the parameters of the washing machine. You should select a part taking into account the characteristics of your washing machine, therefore you can simply remove the worn one and buy exactly the same one.

An important parameter for poly-V belts is the distance between the wedges. For Samsung, the “J” type works well, which means a distance of 2.34 mm. This parameter is indicated on the part itself.

Near the letter on the surface itself the number of wedges is indicated. There can be up to 5 of them. J3 is suitable for narrow Samsung devices, and J5 for wide ones.

The length of the belt is also indicated directly on it. This is an important parameter that cannot be ignored, because otherwise the part will not fit the machine.

For Samsung cars - 1270. Thus, the marking 1270 J3 indicates a poly-V-ribbed three-ribbed belt with J-type wedges and a total length of 1270.

Belts are made from rubber and polyurethane. It is possible to determine the type of material even visually: rubber ones are black, polyurethane ones are light. The former have a longer service life.

A good three-ribbed belt 127 cm Megadyne (made in Italy) costs from 420 rubles. One of the cheaper options is also suitable, which can be ordered, for example, in a specialized store.

Prices for simpler product options start from 200 rubles. They are inferior in quality and less durable, but gain in price.A wider belt has better grip and is less likely to slip.

Calling a specialist: the price of the issue

If it is impossible to replace the drive belt yourself, you must call a technician from a company that repairs household appliances. You can find a company on the Internet. A professional technician will do all the work, conduct diagnostics and give recommendations..

When calling a specialist to replace a belt, you must indicate the make of the machine, as well as whether a new part is available or the technician needs to bring it with him. If the technician additionally has to fix other faults, the amount will be higher.

For machines that are still under warranty, you should call a specialist only from the service center. All information about such companies must be in the documents for the washing machine.

Contacting specialists through private advertisements can be dangerous, since there is a significant chance of ending up with unscrupulous workers, weak specialists or simply scammers. Contacting a company that has been in the service provision market for a long time will help eliminate the risk.

All the most important and useful information about repairing Samsung washing machines is in this section.

Video on the topic of the article

The video will show you how to change the drive belt in a washing machine:

Conclusion

You can change the belt on a Samsung washing machine yourself, even if the back wall of the machine is not removable. But if you need serious diagnostics of the operation, or other breakdowns, it is advisable to seek the help of a specialist.