Why does the Indesit washing machine leak during operation, how to fix the problem?
During operation, Indesit washing equipment, like any other, can fail. Sometimes a breakdown may even be accompanied by a leak.
This is a dangerous situation that can damage the flooring and flood the neighbors on the lower floor.
Why the Indesit washing machine leaks, how to find the problem and fix it, we will tell you in the article.
Content
What to do first?
If a puddle forms under the Indesit washing machine while it is running, urgent measures must be taken to protect both yourself and your home. The procedure for detecting a leak includes several mandatory measures.
In the event that this is impossible to do due to a large amount of spilled water or an inconvenient location of the outlet, you can turn off the electricity supply at the distribution panel.
After the power to the washing machine has been turned off, it is necessary to turn off the water supply tap to the device. If the tap does not turn off, you can turn off the water supply to the entire apartment.
Place rags on the floor to absorb water.. At the same time, it is necessary to remove the laundry from the drum and evaluate at what stage of the wash the breakdown occurred.If the washing process has not yet ended at the time of the failure, and there is still water in the tank, it must be drained through the drain filter and then unloaded.
Only after carrying out preliminary measures should one proceed to determining the cause of the leak and eliminating the breakdown.
Causes of water leakage
After urgent measures have been taken, it is necessary to move on to analyzing the situation. There may even be a situation where the Indesit washing machine is not to blame for the water on the floor.
For this All water pipes should be inspected to ensure they are in good condition, and do not leak. If the problem is in the washing machine, then you will have to move on to diagnostics.
Hoses
Very often, hoses are to blame for leaks: both the inlet and drain hoses can leak.
If the hose has simply moved away from the fastener, it must be returned to its place, tighten the nuts securing its position. But if it itself is damaged, the part should be replaced. This can be done on your own or by contacting a specialist.
As a replacement, you must choose an original part that will last a long time without breakdowns.
Leak in the drain filter area
If water has leaked onto the floor from the area in which the drain filter is located, this unit will need to be inspected. There is a possibility that the Indesit filter is simply not screwed on properly.
To troubleshoot the following actions should be taken:
- Open the panel covering the unit at the bottom of the washing machine.
- Unscrew the filter.
- Check it for damage.
- Tighten again.
A filter that has defects must be replaced.
Leaked from under the hatch door
The easiest way for a leak to appear is something pinched by the hatch door. from those placed in the drum.In such a situation, the “culprit” of the problem becomes immediately known.
If the sealing collar is not damaged due to the jammed item, you can continue to use the washing machine, being more careful at the stage of loading things.
It is important to determine the cause of the wear of the part. This could be sharp objects getting into the drum, careless packing of things, children's pranks, or pet mischief. The best solution to the problem is replace the cuff with a similar one.
Attempting to patch the elastic band or move it to another position is a temporary and unreliable method that it is advisable not to use.
Leaks from the dispenser
If water leaks from the detergent dispenser, it is necessary to disassemble the unit and rinse the dispenser.
Powder may stick to the plastic and block the passage of water.. Fabric softener can also be an insurmountable obstacle if it has a thick consistency or the tray under it has not been washed for a long time.
In all of the above cases, water entering the machine may spill out. Another possible problem is that the water pressure in the system is too high.
Reducing the pressure of the supplied water will help solve the problem. The adjustment is carried out by partially closing the valve installed at the insertion point of the inlet hose.
Also water may begin to flow from the cuvette onto the floor if a lot of washing powder has been poured in, much more than the norm required for washing, and it physically blocked the ability of water to drain into the tank.
If there are small children in the house, then you need to check whether a foreign object, for example, a soft or rubber toy, has gotten into the powder receptacle.
Puddle underneath the washing machine
Sometimes a puddle forms right under the Indesit washing machine. In this case, in order to find the cause of the breakdown, it is necessary to partially disassemble the device itself and sequentially inspect all the components involved in the process.
The problem is in the pipes
There is a high probability that the problem is in the pipes or pump, so It is important to check for integrity:
- hoses that go from the fill valve to the dispenser;
- pipe leading from the dispenser to the tank;
- pipe leading to the drain;
- pump.
Diagnostics and repairs can be carried out by partially disassembling the washing machine - removing the rear wall of the service hatch and the top cover. To do this, you need to disconnect the machine from all communications and pull it out.
Tank damage
Another infrequent, but quite possible cause of a leak is damage to the integrity of the tank. This situation may be associated with foreign objects getting into the drum, and then into the tank.
When the drum rotates friction of a foreign object against the walls of the tank itself may occur. As a result, the integrity of the container is compromised, and water simply flows out under the washing machine.
Repairing a tank, as well as replacing it, is a very labor-intensive task, requiring complete disassembly of the washing machine. This can only be done by a specialist with certain skills and experience.
Indesit will tell you how to repair and replace the drum in a washing machine this article.
Bearing failure
If a leak occurs through the seal of the bearing assembly, then when turning the drum you can hear extraneous sounds.
A part that has become unusable must be replaced. This can be done with serious disassembly of the device, so it is better to entrust such work to a specialist.
In addition to the listed options for possible breakdowns, there is a possibility that water leaks from the powder receptacle along the inner wall of the machine with an outlet only at the bottom.
Indesit will tell you how to replace bearings in a washing machine this article.
Call the master
If the Indesit washing machine is leaking and a puddle has formed under it during washing, it is important to accurately determine the cause of the problem and carry out repairs. It is not always possible to do this on your own.
When calling a technician, you must clearly describe what the problem is with the washing machine and indicate the brand of the machine. The cost of the work will depend on the severity of the damage. If replacement parts are needed, the customer pays for them separately.
The average price for work in the capital is:
- Replacement of pipes - from 900 rubles.
- Replacement of the hatch rubber – from 1,000 rubles.
- Cleaning the drain filter - from 900 rubles, etc.
To carry out diagnostics and repairs, it is advisable to contact officially operating companies that have been in the service provision market for several months. Such companies value their reputation and only hire professionals in their field.
Asking for help from ad professionals can result in big problems - from poor-quality repairs to fraud.
A lot of important and useful information about the repair of Indesit washing machines is presented in this section.
Video on the topic of the article
Why the Indesit washing machine leaks, the video will tell you:
Conclusion
In a situation where the Indesit washing machine is leaking, it is necessary to establish the cause of the breakdown, since a wide variety of breakdowns can lead to disruption of water circulation.
You cannot use such a faulty device.. If you can’t fix the machine defect yourself, you need to contact a specialist.
