Why does the Atlant washing machine not turn on, how to turn it on?

Belarusian Atlant washing machines are distinguished by high-quality assembly and durable operation. It is not for nothing that the manufacturer gives a 3-year warranty on its household appliances.

However, even the most reliable devices fail over time. If the Atlant washing machine does not turn on, you need to focus your efforts on finding and eliminating the cause of the breakdown.

Read the article about why the device does not respond to commands and how to fix it.

Finding the reason

Causes, for which the Atlant washing machine does not start working after pressing the “Start” button:

• broken socket or plug;
• the cord is broken;
• the power is turned off in the house;
• control board is broken;
• there is no water in the water supply;
• the power filter is burnt out;
• power button is broken;
• problems with wires and connectors inside the device - they can come loose as a result of strong vibration or be damaged by rodents.

What should you check first?

The search for any problem must begin according to the principle “from simple to complex.” First of all, the following systems and communications are checked:

1. Availability of electricity in the house. It is enough to press any switch to understand whether there is light in the room.
2. Checking the shield. You need to open it and make sure that the machines are located correctly.Sometimes when the device is put into operation, the circuit is overloaded and the power goes into emergency mode.
3. Inspection of the outlet. If the plastic is melted, has dark spots on it, or has a burning smell, you should not use this power source. If there are no visible defects, any device powered by electricity is connected to the outlet to which the machine is connected. If contact is normal, the search for the cause of the problem continues.
4. Checking the integrity of the plug and cord. They must not be damaged, pinched or broken. This problem is especially relevant for people who keep animals in the house.
5. Pay attention to the device display. Sometimes an error code is displayed on it, indicating exactly where the breakdown occurred and which components need repair.

All of the above reasons need to be checked independently. To identify them, you do not need the help of a specialist or special tools.

Repair

If simple faults were excluded during diagnostics, you should move on to finding and eliminating complex defects. To do this, you will have to completely or partially disassemble the device.

Tools that should be on hand:

• screwdriver;
• pliers;
• multimeter;
• adjustable wrench.

Network filter

The filter is located immediately under the top cover of the Atlant washing machine. It is designed to protect it from voltage surges. If it malfunctions, code F7 may appear on the screen.

To eliminate the breakdown, follow the following procedure:

1. Disconnect the machine from all communications.
2. Remove the top cover by unscrewing the two bolts that secure it.
3. Find the surge protector, which is located on the side wall of the device.
4. Check its performance using a multimeter.
5. Twist and replace the part if it is faulty.
6. They assemble the machine and turn it on.

Start button

If the power button is broken, the machine will not be able to be turned on. Often the defect can be detected immediately. The faulty button sticks and dangles.

If the button looks normal externally, you need to test it with a multimeter. If a breakdown is detected, you will have to remove the top cover and front panel. Replacing the old button is easy; just insert the wires into the new terminals.

Control board

A failure of the control module will lead to a complete stop of operation of the washing machine. The defect will be indicated by error codes F13 and F14.

Repairing an electronic controller involves performing the following steps:

1. Disassemble the machine and get to the control board. It is located at the top of the device, behind the front panel.
2. Disconnect the wires and remove the board.
3. Check the performance of the part using a multimeter.
4. Correct the problem. Certain board elements, such as capacitors, may not work. Although sometimes to restore its functionality it is enough to clean the tracks from dust and carbon deposits, or replace the wiring.

If the module cannot be repaired, it must be replaced or reprogrammed.

UBL

Sometimes it happens that the machine turns on, but the wash does not start. The reason may come down to a breakdown of the UBL. This device is designed to securely fix the hatch door during operation of the device.

You can check the functionality of the blocker using a multimeter. A code also appears on the device screen F10 or F11. In most cases, the UBL cannot be repaired; it requires a full replacement.

Power cable

The cord leading from the Atlant washing machine to the outlet may be damaged at the bend or in the area where it connects to the plug. First, you need to inspect it for external defects.

If they are not detected, but there is a suspicion that the malfunction comes down to problems with the cord, it is checked with a multimeter. The device is set to the “buzzer” mode, the probes are applied to the two ends of the cord. A squeak that appears when turned on indicates that the part is working properly.

If the problem is with the plug, then melted areas or cracks may be found on it. It is dangerous to use a faulty cord; it must be changed immediately.

Wires

The wires are responsible for supplying power to all elements of the washing machine, as well as for sending signals and commands that the user sets. If there is a problem in the circuit, the device will not turn on.

Wires may be broken or damaged by rodents. To assess their performance, you will have to disassemble the washing machine.

Call the master

If you cannot identify the problem yourself, you need to seek help from a specialist. You can find a master in one of the following ways:

1. Study offers posted on the Internet. Both private professionals and companies promote their services in the virtual space.

   There are many advertisements, so you can find a specialist who meets all your requirements.

   To minimize the risk of encountering scammers, you need to study the reviews left by other clients. It is best to look for them on third-party sites and forums.

2. Refer to newspaper advertisements. Every city has a local print publication with the heading “Services” or “Household Appliance Repair.”
3. Consult with relatives or friends. They may have already dealt with washing machine repair specialists. If they are satisfied with the quality of the services provided, you can ask them for the specialist’s contact information.
4. Contact the service center. Such organizations have their own workshop and staff. Since they work officially, the risk of receiving low-quality service is minimal.
5. Study advertisements on information boards, billboards, and poles. This method of searching for a master has not lost its relevance. You can see posted advertisements everywhere.

The cost of the work differs depending on what kind of problem needs to be fixed. Approximate prices:

• UBL – from 1300 rubles;
• control module – from 2100 rubles;
• replacing the power cord or filter – 1,500 rubles;
• wiring - from 1600 rubles.

Prices are for repair work only. The cost of parts will have to be paid separately.

Conclusion

Sometimes the Atlant washing machine does not turn on for trivial reasons such as a power outage or a burnt out socket. Although there are often situations that require complex repairs with the replacement of main components. Only a specialist can cope with such a task.