Reliable, high-quality equipment that is in demand: the Huter SGC 4800 snow blower

In anticipation of winter, it is important to prepare for possible snow drifts. You can clear the area using snow blowers.

Easy-to-use equipment allows you to quickly remove snow without much labor.

One of the successful purchases will be the Huter SGC 4800 snow blower.

Characteristics of the Hooter snow blower

Huter snow blowers are reliable German semi-professional equipment that is designed to clear a relatively small area of ​​snow. The model is capable of clearing snow debris on garden paths, near a private house or garage.

The drive of the snowfield goes to the working auger and to the wheels. The latter have a pronounced tread, which allows the equipment to move confidently and not slip on ice or frost. The Huter has a gasoline engine, four-stroke, engine capacity – 3.6 liters.

The snow blower has 5 forward speeds and 2 reverse speeds. The direction of snow ejection can be adjusted mechanically from the control panel. The reclining range is up to 10 meters, depending on the density and humidity of the snow cover. The weight of the device is 76 kg. The bucket has a convenient size - 56 x 50 cm, allowing you to capture even a fairly thick layer of snow well.

Advantages and disadvantages

The Huter snow plow model 4800 is in good standing with buyers and is in stable demand.

At the snow blower there are many advantages:

• reliability;
• long service life;
• the equipment is self-propelled;
• deep tread on wheels;
• electric start;
• selection of forward and reverse speeds;
• wheel drive and auger;
• a large bucket that provides good grip on the snow mass;
• halogen lighting is provided by a powerful headlight;
• ease of maintenance and operation.

The model's disadvantages are not critical: the handle is not heated.

Assembly

The snow blower is delivered to the buyer in a box, partially disassembled. Assembly is carried out according to the instructions, step by step:

1. Installation of the control handle is carried out by securing it to the body using four bolts.
2. Installation of the supplied snow chute. The part is secured using three strips. A bracket is inserted inside, which is designed for protection.
3. Installation of the chute rotation lever. Mounting can be on a bracket or in another way.
4. Fastening the gear shift lever. Fastening is done using bolts and nuts.
5. Installation of wheel drive cables and auger.
6. Adjustment of side limit shoes. When setting up, you need to take into account that when the snow blower moves, the auger does not touch the surface that is being cleared of snow.

You can watch the assembly and launch in detail in the video:

Preparing for launch

The Hooter snow blower is supplied without oil or gasoline in the engine. At the preparation stage it is necessary:

1. Pour oil into the engine crater. 600 ml is enough.
2. Check the oil level before starting the engine.
3. Tires must be inflated. The pressure in them should be about 1 bar.
4. Pour AI-92 gasoline into the gas tank.
5. If necessary, adjust the limit shoes.
6. Make sure that the wheel drive and auger drive levers do not require additional adjustment. Otherwise, adjust.
7. Using machine oil, lubricate all moving parts, including the chute swivel assembly.

How to start and use?

A prepared snow blower can already be used to clear snow. To do this you need:

• the fuel tap located under the air damper must be set to the “On” position;
• with a cold engine, close the air damper;
• move the lever responsible for the throttle valve to the right;
• start the starter;
• After the engine has warmed up, open the choke.

Do not start working until the engine has warmed up. While the snowplow is operating, it is necessary to ensure that there are no people, animals or foreign objects in the path of the equipment. If you need to change the speed, you need to release the drive levers of the wheels and auger.

After finishing work, the snowfield needs to be turned off. To do this, perform the following steps:

1. Release the wheel drive lever.
2. Release the auger drive lever.
3. The engine must run for another 5 minutes.
4. Turn off the engine by moving the regulator to the “Off” position.

How to maintain and where to store?

Snow blower maintenance includes a set of activities, including:

• cleaning after work;
• control of the presence of technical fluids;
• timely repair of breakdowns;
• proper storage and transportation.

In order for the equipment to work properly, you must follow the recommendations:

• Before each use of the snow blower, check the oil level;
• every 25 hours of operation - change the engine oil, clean the spark plugs and clean the air filter.

Change of oil

Changing the oil is one of the main measures to maintain equipment in working condition. It must be done in a timely manner - after 25 hours of total operation of the snow blower.

To change the oil, you need to drain the old one, and only then fill in the new one.. 5W-30 oil is suitable for Hooter.

It is intended for equipment operating at low temperatures – down to -30? C. When operating equipment, engine oil begins to lose its quality, which can lead to serious damage. The way out is to change the oil.

Fuel

The Hooter snow blower runs on gasoline. AI-92 or AI-95 can be used for refueling. If you do not plan to use the equipment for a month or more, gasoline, like oil, must be drained.

Gearbox

The gearbox in a snow blower is a structural element that drives the wheels and auger. With prolonged use, the belts on it can weaken and impair movement. Excessive belt tension is also not advisable, as it can lead to breaks.

What needs to be done at the end of the winter season?

After the end of the winter season, the snow blower needs to be prepared for storage in the spring, summer and fall. The set of measures includes the following points:

1. Drain the gasoline.
2. Drain with oil.
3. Cleaning the snow blower.
4. Wiping metal parts with an oiled rag.
5. Add oil to the spark plug hole.
6. Install in a storage location, placing the device horizontally.
7. Cover the top of the Hooter with a cover.

If necessary, carry out annual maintenance at a service center before the start of the season.

Place of purchase, price

You can purchase a Hooter for snow removal in stores that sell equipment for gardening and maintaining the local area or order it online.

The cost depends on the place of purchase. On average, this model has a price of 54,000 rubles and above.

Additionally, you also need to buy fuel, lubricant and engine oil. When purchased at official sales points, equipment is provided with a 1-year warranty.

Customer Reviews

Customers who already own the SGC 4800 are mostly satisfied with the purchase. They note the following advantages of the snow blower:

• simple assembly;
• good power for such a compact device;
• headlight included;
• electric starter;
• easy controls;
• does not slip on ice;
• good performance;
• economical fuel consumption.

The disadvantages include:

• the wires leading to the headlight are not securely fastened and protected;
• does not throw away wet snow effectively enough;
• noisy work;
• The instructions that come with the kit are not detailed.

Alternative options

In addition to the Huter SGC 4800 model, other self-propelled equipment can also help in clearing paths and other small areas of snow. For example, TM Daewoo, Champion, Patriot.

Daewoo Power Products DAST 3000E

Daewoo is an electric snow blower that has a 51 x 33 cm bucket and throws snow up to 12 meters. Lightweight and compact model suitable for use near a private home and a garage.

Engine power – 4 hp. A headlight is included. The snowball is lightweight, weighs less than 20 kg, and has simple controls. Operates on voltage 220-240V. Price – from 22,000 rubles. An overview of the snow blower is presented in this article.

Champion ST556

The average gasoline snow truck is suitable for clearing snow in the local area and near garage buildings. The bucket has a size of 56 x 42 cm, snow is thrown at a distance of up to 8 meters. The device runs on gasoline.

Cost – from 42,000 rubles. An overview of the snow blower is presented in this article.

Patriot PS603E

The Patriot Model 603 is a midsize gas snow blower. Engine – 7 hp, bucket size 56 cm wide and 42 cm high. Wheels with winter tread. Loose snow is thrown at a distance of up to 12 meters; for compacted snow this figure is lower. The screw is made of reliable metal.

Tank volume – 3.6 l. The 603E modification has a headlight, but the 603 model does not. Price – from 48,000 rubles. An overview of the snow blower is presented in this article.

Conclusion

Huter SGC 4800 is a reliable snow removal equipment of German quality that has good performance characteristics. Such a device can be successfully used to clear snow from the area around a private house, in front of a garage and outbuildings.

If used correctly and stored, the device will last for many years., helping with heavy seasonal work.