Review of the self-propelled gasoline snow blower Huter 4100: characteristics, price, customer opinions

With the arrival of a snowy winter, owners of private buildings need to have reliable snow removal equipment on hand.

In addition to hand tools, self-propelled snow removal equipment is a good help for clearing snow. Among the best snow blowers are products from the German company Huter.

A review of the Hooter 4100 snow blower is presented in the article.

Model description

The Huter SGC 4100 snow blower is a popular, reliable model with good performance. This technique Suitable for cleaning relatively small areas:

• local area;
• parking lots;
• pedestrian paths, etc.

Thanks to the drive that goes to the pulley and wheels, the movement of the snow patch is quite easy and does not require much physical effort to push the device in front of you when removing snow. The engine of this model is four-stroke, gasoline. Power – 6.5 hp.

The manufacturer provides the ability to use 5 speeds for forward movement and 2 for reverse movement. Tank volume – 3.6 l. The weight of the device itself is 75 kg.

The main part of the snow blower is the auger. He is the one responsible for high-quality snow removal. In the SGC 4100 model, it is made of durable steel that can easily withstand the load, allowing you to clear even stubborn heavy snow and ice.

The bucket provides snow capture 0.56 m wide. The height of the bucket is 0.54 m, which is the best option for medium-sized self-propelled equipment. Huter SGC 410, subject to operating rules, is capable of trouble-free operation even in difficult weather conditions.

Pros and cons of the Huter snow blower

Hooter SGC 4100 is one of the most popular models among buyers. Snezhnik has many advantages:

• deep wheel tread;
• reliability;
• drive to the auger and wheels;
• self-propelled model;
• compact size;
• easy start;
• does not slip on ice;
• economical fuel consumption;
• quality materials;
• ease of maintenance;
• powerful auger;
• resistance to low temperatures;
• throwing snow - up to 15 meters.

The disadvantages of Huter include:

• lack of headlights;
• only 2 reverse speeds.

Assembly

The Huter snow blower is delivered partially disassembled, so it must be fully assembled before use.

You need to act step by step:

1. Reinstall the control handle.
2. Install a snow chute on the body.
3. Install the gear shift lever.
4. Install the wheel and auger drive cables.
5. Adjust the position of the limit shoes. The auger should not touch the ground, otherwise it will quickly break.

You can clearly see the process of assembling the snow blower in the video:

Preparing for launch

After the Huter equipment is completely assembled, it is necessary to fill it with gasoline and oil. These technical fluids are not included in the factory supply. SAE synthetic oil, 5W-30 series, is suitable for use.0.6 dm² is poured one-time.

Stages of checking the readiness of the snowfield:

1. Checking tire pressure. In working condition, this indicator should be in the range of 1.6 - 1.8 bar.
2. Pour gasoline into the tank.
3. Adjust the limit shoes.
4. Adjust the auger drive.
5. Adjust the wheel drive.
6. Lubricate all rotating parts of the snow blower using machine oil.
7. Lubricate the chute swivel assembly with oil.

Operating rules

The Snowman SGC 4100 has a relatively simple design. When used correctly, it can work without failure for years.

While using the snow blower It is important to pay attention to the following points:

• monitor the direction of snow emission;
• the machine is designed for removing snow from level ground and should not be used for cleaning sloped surfaces;
• refueling is carried out with the engine turned off;
• during operation it is necessary to control the oil level;
• the adjustment of the restrictive shoes is made taking into account the type of surface being processed - the smoother it is, the lower they can be fixed;
• After finishing the work, it is necessary to remove the remaining snow and ice adhering to the device.

How to start a snow blower? The work is started according to the following algorithm:

1. Open the fuel valve to the “On” position.
2. If the engine is cold, close the choke.
3. Move the throttle lever to the right
4. Start the engine with the starter by pulling the cord.
5. After the engine has warmed up, open the choke.

By moving the snowfield, the area is cleaned. After the work has already been completed, the device must be turned off. This needs to be done in stages:

1. Release the wheel drive lever.
2. Release the auger drive lever.
3. Leave to work for another 3-5 minutes.This is necessary to ensure that the engine does not freeze and the moisture evaporates.
4. Turn off the engine itself.

This equipment must be used only for its intended purpose.

Demonstration of the operation of the SGC 4100 - on video:

Maintenance and storage

A Hooter snow blower will last a long time if you care for it properly. We are talking about monitoring the condition of equipment - maintenance and routine inspection. If malfunctions occur, it is necessary to carry out timely repairs without triggering the situation.

Change of oil

For all Huter snow blowers It is recommended to fill in 5W-30 oil. It has characteristics suitable for working in winter conditions, which are maintained even at a temperature of -30? C.

The manufacturer recommends changing the oil after 25 hours of operation. Ignoring this point can significantly reduce the life of the equipment.

Oil change procedure:

• warm up the engine - this is necessary so that the filled oil acquires a more liquid consistency, and it can be drained without problems;
• place a container under the oil tank drain;
• remove the plug from the oil tank;
• drain the oil - this will take on average about a quarter of an hour;
• insert the plug;
• add new oil;
• start idling - during this time the filled oil will be able to be distributed among the engine elements.

What else needs to be done every 25 hours of operation?

In addition to changing the oil, every 25 hours of operation It is necessary to pay attention to such important points:

• air filters - check their condition;
• Spark plugs - need to be cleaned and the gap adjusted.

Prevention measures

The main preventive measures include:

1. Quality control of poured fuel. It should be AI-92 or AI-95 gasoline.
2. Checking the security of the bolts. Otherwise, vibration may occur, threatening equipment damage.
3. The oil poured into the snow blower must meet all requirements.

Gearbox lubrication

One of the mandatory conditions for maintaining a Huter snow blower is timely lubrication of the gearbox. Litol 24, Graphite Smaka (GOST 3333-80) or another analogue is suitable for these purposes. The bolt covering the gearbox must be the correct size, ensuring a good fit and leaving no gaps.

Cleaning

After work has been carried out with a snow blower, it needs to be cleaned. This should be done with the engine turned off. Clean the chute and auger using a brush. In addition, it is possible to use a pressurized water jet from a hose to clean the auger and bucket. After that, dry it.

Storage

Between frequent uses, it is recommended to store the snowflake in a place protected from weather exposure.

After the end of winter, the device must be prepared for preservation:

1. Pour gasoline into the canister.
2. Drain the engine oil.
3. Clean the outer parts of the snowfield.
4. Wipe the metal elements of the device with an oiled rag.
5. Replace the lubricant in the gearbox.
6. Place the device horizontally on a flat surface.
7. Cover the top with a cover.

The snow blower must not be stored or transported in a non-horizontal position if it is filled with technical fluids.

Where to buy and how much to pay?

Huter SGC 4100 is one of the popular models. It can be purchased in specialized stores that sell equipment for the garden and home or ordered in online stores.The average cost is from 47,000 rubles.

Reviews

Users of SGC 4100 equipment note the following advantages of the snowfield:

• optimal price-quality ratio;
• good cleaning is ensured;
• the snow falls far away;
• does not cope with ice very well;
• efficiency;
• noisy work.

The disadvantages of the technique include:

• does not “listen” well when turning;
• spare parts cannot always be found on sale;
• slow movement back;
• Difficult to clear ice and wet snow;
• no lighting provided.

Alternative options

In addition to the Huter SGC 4100, other self-propelled snow blowers with good performance can be used to clear areas of snow.

1. Patriot PS 603 E. The Patriot model 603 is a medium-sized gasoline snow blower. Engine power – 7 hp., the snow mass is captured with a width of 56 cm. The height of the bucket is 42 cm. Wheels with deep tread.

   Snow is thrown at a distance of 10-12 meters. The screw is made of reliable metal. Tank volume – 3.6 l. There is a headlight. The average cost is from 48,000 rubles.

   

2. Hyundai S 5556. The gasoline snow truck provides snow capture of 53 x 51 cm. The collected snow is thrown out at a distance of up to 11 meters. The device is quite compact, weighing 57 kg. The average price is from 54,000 rubles.

   

3. Champion ST 556. A self-propelled snow blower is suitable for cleaning small areas. Powered by gasoline, tank volume – 3 liters. Provides snow capture 56 x 42 cm and throws it at a distance of up to 8 meters. The screw is made of metal. Price – from 42,000 rubles.

   

Conclusion

Huter SGC 4100 is a reliable equipment of European quality that will help clear small areas of snow. The snow blower is suitable for private use and is not an industrial device.

Following the instructions, it is important to use and maintain it correctly. This will prevent rapid wear and reduce the likelihood of breakdowns.