Huter

You can cope with the abundance of winter precipitation with the help of a snow blower. However, a large selection of equipment can confuse any buyer.

If you have decided to purchase a snow blower, you should turn your attention to the Huter brand, which is very popular in Russia and abroad.

Read the article about who produces them, what advantages and disadvantages the technology has, how to choose the right model and how to use it.

Manufacturer

Huter is a German brand. The company produces snow removal equipment, which is manufactured at a factory in China. All products are distinguished by high build quality and durability.

In addition to snow blowers, the company sells:

• electric generators,
• cultivators,
• lawn mowers and other equipment needed on the farm.

In 2015, the organization was recognized as a leader in the sale of portable generators in Russia. By the way, the brand “HUTER” literally translates as “Guardian”.

Pros and cons of Hooter snow blowers

Advantages Huter snow blowers:

1. A reliable manufacturer that provides both warranty and post-warranty service for equipment.
2. There are budget and expensive models on sale.
3. Availability of equipment with gasoline and electric engines.
4. Durable metal augers that can be used to remove even compacted snow.
5. The engines run on available AI-92 gasoline.
6. All devices are manufactured using German technologies.

The disadvantages of snow removal machines include:

• noisy work;
• difficulties with purchasing original spare parts.

Popular models, their characteristics, price

Let's look at the popular models of Hooter snow blowers:

Top 3 Gasoline Snow Blowers

Below are the best gas snow blowers:

SGC 5500B

Petrol snow blower Huter SGC 5500B, self-propelled, battery included. The equipment copes well with cleaning small areas. In one pass it is possible to clear a path 62 cm wide.

The wheels easily move the device even on ice. The engine power is 5500 W, the tank is designed for 3.6 liters of gasoline. The augers and pipe for throwing out snow are metal. Price 59,400 rubles.

SGC 4000E

Petrol snow blower Huter SGC 4000E, self-propelled. Inflatable wheels, equipped with deep tread, which ensures reliable adhesion of the equipment to the surface. It is possible to adjust the speed of snow release.

The engine has a power of 4 kW and runs on AI-92 gasoline. The screws, impeller and chute are made of metal. In one pass it is possible to clear a path of 56 cm. Price – 51,800 rubles. An overview of the model is presented in this article.

SGC 4100

Petrol snow blower Huter SGC 4100, self-propelled. Engine power is 6.50 liters. With. The cleaning system is two-stage with a high-speed impeller that crushes snow, so the equipment can be used to clear rocky areas (without direct contact with the surface).

Snow capture width 56 cm. Price – 46,600 rubles. An overview of the snow blower is presented in this article.

Top with electric

Below are the best electric snow blowers:

SGC 2000E

Electric snow blower Huter SGC 2000E. The control is manual; to move the equipment around the area, it is simply pushed forward. In one pass it is possible to clear a strip of snow 46 cm wide.

The screws are a combination of plastic and metal, the chute is plastic. Engine power is 6.5 liters. With. The total weight of the product is 10.6 kg. Price – 16,300 rubles.

SGC 1000E

Electric snow blower Huter SGC 1000E. 1200 W motor, which is enough to work in a small area. The snow capture width is 28 cm, it is thrown at a distance of up to 3 m. The total weight of the product is 6.5 kg. Price – 6000 rubles. A review of the Hooter 6000 snow blower is presented in this article, Hooter 4800 -in this.

Preparing for launch

Preparing for the launch of gasoline Huter snow blower:

1. Before starting, it is necessary to check the reliability of the connections; if necessary, tighten the bolts and nuts.
2. The handle cables responsible for driving the wheels and auger are tensioned.
3. Pour oil into the engine catheter. It is delivered empty. Check its level before starting, for which a dipstick is used.
4. Gasoline is poured into the tank.
5. Adjust the limit shoes.
6. Lubricate all moving elements with machine oil, add a small amount to the rotating gutter assembly.

Preparing to start the electric Huter snow blower:

1. Assemble the equipment by installing the handles and snow emission deflector.
2. Connect an extension cord with a voltage of 220 V and a frequency of 50 Hz to the equipment. Assess the integrity of the power cord.
3. Inspect the area for stones, branches and other foreign objects. If they are found, remove them.
4. Place the power cable on the side of the cleared area.

How to launch and use?

Rules for starting and operating gasoline models Huter snow blowers:

• find the fuel valve under the air damper and open it, after which the damper is closed;
• the lever responsible for controlling the throttle to the right is set to the “Turtle” position;
• press the fuel pump six times - this is done so that it enters the carburetor;
• connect to a 220 volt network;
• turn on the ignition by turning it to the “ON” position;
• press the red button to start the equipment;
• if the model is equipped with an electric starter, then use the ignition keys;
• when the engine warms up, open the air damper;
• select the speed using the lever located on the control panel;
• for the equipment to start moving, press the lever, which is located on the right side of the handle;
• to start the auger, press the lever located on the left;
• the chute is rotated by adjusting the lever located on the left, at the bottom of the device;
• at night you can use headlights.

Features of operating and starting a device with an electric motor:

• turn on the power button by moving it to the “On” position;
• clear the snow, moving forward slowly;
• drive the snow blower in front of you;
• When icing elements of equipment, disconnect it from the network and clean the frozen parts.

The device must not be used to remove wet snow.

How to serve and store?

Maintenance and storage rules Huter snow blowers:

1. Before storing the equipment, the engine must be allowed to cool.
2. Augers and gutters are cleared of snow using a brush. Do the same with the motor, the main thing is that it is not hot.
3. Equipment must be stored indoors.
4. Oil is added to the gearbox every 25 hours of operation in an amount of about 30 g.
5. If equipment is put away for storage for a month or more, then gasoline is drained from the tank and carburetor, and oil is drained from the engine by unscrewing the catheter. All metal parts are wiped with a cloth soaked in an oily solution, and the candle is turned out. Be sure to add lubricant to the gearbox.
6. The prepared equipment is covered with a cloth and sent for storage.

The algorithm for preparing an electric snow blower for long-term storage boils down to cleaning it from dust and dirt, wiping the metal parts with an oil mixture and covering it with a tarpaulin.

Where can I buy?

You can purchase Huter snow blowers in retail stores that sell similar equipment. You can also order the device in large online markets by choosing the appropriate model.

The range is varied, there are both budget and premium cars on sale, the cost of which reaches 125,000 rubles. If necessary, delivery can be made to the address specified by the buyer.

Owner reviews

Consumers respond mostly positively to Huter snow blowers. They are easy to use, and the instructions that come with them are written in as much detail as possible. People note that operating the equipment is easy even for a woman.

Disadvantages include the lack of headlights on budget models, difficulties in purchasing original components, and a short power cord.

Alternatives

Except Huter The following companies produce snow removal equipment:

• Patriot;
• Champion;
• Husqvarna.

When purchasing equipment, you need to take into account not only its cost, but also the features of the chosen model. Read about Patriot snow blowers Here, Champion - here, Husqvarna - Here.

Repair

Malfunctions that the owner may encounter snow blowers:

1. The engine does not turn on. It is necessary to check the voltage in the network, the serviceability of the power cord, switch and the integrity of the graphite brushes. If a serious breakdown is detected, contact the service center.
2. The engine makes a hum, but the equipment does not work. Perhaps the crust is too hard, you need to try to do the work in an area with loose snow.

   Another option is to block the auger; you need to turn off the device and remove the foreign object that is interfering with rotation.

3. The equipment does not move, but the engine is running. The auger drive belt may have become loose or broken. It needs to either be tightened or replaced.
4. The device vibrates strongly. There are two reasons for the malfunction: the auger is broken, or the fastenings are loose. The auger will have to be replaced, and the bolts can be tightened.
5. The equipment smokes and emits a burning smell. The rotor or stator has failed. It is difficult to carry out repairs on your own; it is better to seek help from a specialist.

Conclusion

The Huter snow blower will become an indispensable assistant in winter. With its help, you can quickly clear the area of ​​snow, saving your energy and time.