In good standing with owners of private buildings: the Carver 6556 snow blower, its characteristics and price
With the arrival of winter, the problem of snow removal becomes urgent.
In the local area, snow debris can be cleared not only with hand tools, but also with gasoline snow blowers.
One of the best options is the Carver 6556 snow blower; we’ll talk about the pros and cons, characteristics, and price further.
Content
Description of the petrol model Carver STG 6556
The Carver trademark belongs to the domestic Perm company "Uraloptinstrument". The company produces professional and semi-professional tools - generators, engines, brush cutters, gasoline scythes, etc. One of the areas of production is snow removal equipment.
Specifications of the Carver STG 6556 include an air-cooled four-stroke engine. The fuel tank volume is 3.6 liters, engine oil requires 0.6 liters. This model provides snow capture with dimensions of 56 x 49 cm.
Snow throwing range is good, up to 15 meters. It is possible to adjust the direction of the bell (up to 190?). The Carver STG 6556 has eight speeds: two reverse and six forward.
The wheel size of the 6556EL model is larger than that of the standard Carver STG 6556. But in both versions the tread is deep, designed for driving on snow and ice without slipping.
Carver STG 6556 does not have headlights and an electric starter, model 6556EL does have, and weighs 2 kg more (76 kg). The gutter on the structures of both modifications is metal, the transmission type is a friction disk.
Advantages and disadvantages
Carver STG 6556 is a model that is in good standing with owners of private buildings. Using a snow patch is convenient for clearing paths and small areas.
The advantages of the model include the following factors:
a rotary chute allows you to adjust the direction and distance of the ejection of collected snow;- ease of operation - all the necessary switches are located on the operator panel;
- long service life;
- reliability;
- good wheel permeability;
- self-propelled;
- metal embossed auger with a large casing;
- affordable price;
- high quality of assembly and materials;
- a large number of speeds.
Disadvantages include:
- no heated handles;
- headlight and electric starter are available only in the modified version 6556EL;
- not suitable for clearing large areas.
Assembly
The Carver STG 6556 snow blower is delivered almost completely assembled. The main part and all components must be removed from the packaging.
Assembly is not complicated, it is carried out according to the following algorithm:
- Install the lower part of the handle.
- Secure the handle with the bolts included in the kit.
- Install wheels.
- Secure the wheels with cotter pins.
- Install the upper part of the handle.
- Secure the handle with the thumbs.
- Connect the snow ejection socket.
- Secure the bell with screws and stops.
- Install the snow ejection turning lever.
- Install the gear shift rod.
After completing assembly, it is advisable to check all fastenings again.
Preparing for launch
Operating a snow blower involves operating levers. Before starting snow removal, you must read the manufacturer's instructions and recommendations:
| Control lever | Usage |
| Air damper | Has the ability to switch left and right. Closing the carburetor choke helps the engine start |
| Throttle valve | Location: on the engine. Purpose – speed control |
| Switching speeds | Located on the operator panel. The speed varies from “1” to “6” when moving forward and there are 2 positions for moving backwards |
| Screw | When you press the lever to the handle, the auger turns on, when you release it, it turns off. |
| Drive unit | Located on the right handle. When pressed, the snowball moves; when released, it stops. |
Before starting, it is necessary to check the condition of the systems, the engine oil level, the condition of the wheels and the presence of gasoline in the fuel tank. There should be no obstacles along the path of the planned movement of the snow blower that could damage the equipment, as well as people and animals.
How to launch and use?
Only a prepared Carver STG 6556 snow blower, which has been filled with oil and fuel, can be put into operation.
Procedure:
move the throttle control lever to the middle position;- open the fuel tap;
- set the switch to the “On” position;
- Move the air damper control knob to the “On” position. for cold starts;
- press the primer 2-3 times;
- Pull the starter handle slowly at first, and if you feel resistance, jerk it;
- When the engine has started, move the choke control to the “Off” position.
An extension cord is required to start the Carver using the electric starter. It is necessary to choose it taking into account the fact that it will be used outdoors at low temperatures. To start the engine in this case, the start is carried out by pressing a button on the operator panel. After the engine starts running, the button is released.
Holding the electric start button should not be longer than 5 seconds. If a repetition of the procedure is necessary, there should be a pause of 15 seconds between attempts. For full operation, the engine must be allowed to warm up, and only then can it be given full load.
Stopping the Carver STG 6556 engine, as well as starting it, requires compliance with the following sequence of actions:
- Allow the engine to idle before turning off. A few minutes is enough.
- Move the throttle valve to the low speed position.
- The switch is in the “Off” position.
- Close the fuel valve.
- Wipe off any moisture around the engine.
- Clean the chute, auger and bucket.
Video review of the Carver snow blower:
Maintenance and storage
Carver STG 6556 maintenance includes regular procedures that are carried out according to schedule. Checking the engine oil is an activity that must be carried out before each start..
For this, a dipstick cover is used, with which the level is determined. If necessary, oil must be added to the upper level.
The choice of oil depends on the operating conditions of the equipment:
Among the mandatory care measures The Carver STG 6556 snow blower includes:
- checking the condition of the spark plug after 100 hours of operation;
- adjustment of support skids - as necessary;
- adjustment of the unloading chute - as necessary;
- Check tire pressure before starting work.
The Carver STG 6556 snowfield is sent prepared for long-term storage. To do this you should:
- drain fuel;
- wipe the surface of the engine and the snowfield itself;
- carry out lubrication.
The snow blower can be stored in dry, ventilated areas.
Where to buy, how much does it cost?
You can buy Carver STG 6556 in online stores, hypermarkets or specialized sales points that sell equipment for caring for areas near your home.
The cost of a Carver snow blower depends on the place of purchase, model modification and promotions. On average, the price for Carver STG 6556 is from 38,000 rubles.
Reviews
Buyers leave, for the most part, favorable reviews of the Carver STG 6556.
They note the following advantages:
- compactness;
- functionality;
- ease of operation;
- not difficult to maintain;
- non-slippery wheels;
- economical fuel consumption;
- affordable price.
The disadvantages include the following:
- snow is not thrown as far as stated;
- The drive belt stretches over time;
- In the cold, manual starting is not the first time.
Alternatives
In addition to the Carver STG 6556 snowfields, other similar equipment can be purchased for clearing snow in small areas.
Huter SGC 4800
Hooter 4800 is a gasoline snow blower for use in small areas. Powerful (7 hp) and compact, it is suitable for work near the house and outbuildings and clearing paths. The price of the unit is from 51,000 rubles.An overview of the model is presented in this article.
DAEWOO DAST 6560
DAEWOO is a gasoline powered snow blower. The model is very functional and quite powerful (6.5 hp). Thanks to non-slip wheels and self-propulsion, the snowman can cope with even complex tasks. The cost of this Daewoo model is from 60,000 rubles. An overview of the model is presented in this article.
HONDA HSS 655 EW
The petrol snow blower TM HONDA is compact and practical. The snowfield is intended primarily for domestic use by residents of private buildings. The device has a two-stage cleaning system. Snow throwing – up to 14 meters. There is a powerful headlight. The device is compact and mobile. Price – from 167,000 rubles.
Conclusion
Carver STG 6556 is a good choice of snow removal equipment that allows you to clear snow near your home, in a parking lot, in front of a garage, etc. With careful handling and quality maintenance, such a device will serve for years, cleaning quickly and without requiring any extra effort.
