How to easily, quickly and effectively remove mold in the bathroom on sealant?
The use of sealant in the bathroom is an integral part of plumbing work.
Excess moisture in the room and poor natural lighting lead to the appearance of mold even in unexpected places, including on sealant.
It is possible to solve the problem on your own, using proven recipes or purchased household chemicals. How to remove mold, we'll tell you in the article.
Content
What is the danger of black fungus?
Children, the elderly and people with reduced immunity suffer the most from the fungus. The danger is associated with negative health effects.
Problems caused by fungal development in the bathroom:
asthma;- pneumonia and other respiratory disorders;
- nausea;
- loss of appetite;
- exacerbation of allergic manifestations;
- dermatological and other pathologies.
From the sealant used for waterproofing, pathogenic flora can get onto bath accessories and accumulate in the air. In addition to affecting the health of households, mold has a detrimental effect on engineering structures, destroying materials.
Knowing about all these features, fungus on the sealant should be dealt with carefully, and preferably in the initial stages. Do not allow fungal colonies to grow.
Elimination methods in the bathroom and shower
There are several methods for dealing with mold that has formed on sealant. One of the factors for successful fighting fungus in the bathroom – identifying the source of the problem and eliminating it. And after cleaning from pathogenic flora It is important to carry out preventive treatment of waterproofingto prevent the growth of pathogenic microorganisms in the future.
This precaution is due to the whitening effect that most of the products used provide.
All work should be done wearing rubber gloves., protecting hands from contact with aggressive chemicals. The use of a respirator will prevent pathogenic flora from entering the respiratory tract. To treat hard-to-reach places, it is better and more convenient to use small brushes rather than sponges.
Cleaning powder and white: a good combination
Even a regular powdered cleaning product will help you cope with removing fungus from the sealant.
To compile the tool you will need:
- cleaning powder;
- white;
- sponge;
- water.
Order of conduct:
- Prepare warm water.
- Dilute a small amount of powder in it.
- Using a sponge, thoroughly treat the affected areas.
- Rinse off the composition with water.
- Apply undiluted white to the sealant.
- Leave for 15 minutes.
- Rub the sponge over the areas that were worked on.
- Rinse with water.
- Dry the sealant.
The final result will directly depend on the efficiency and quality of processing.If mold remains in some places after the work has been done, the cleaning will need to be repeated.
Combination of baking soda and vinegar
To eliminate mold, as one of the options, you can make a foaming cleaner using baking soda and vinegar. For 1 liter of water you need to take 1/10 of a pack of soda and 20 grams of table vinegar.
The prepared mixture is safe and quite effective. In addition to the sealant, this composition can be used to treat tiles and other surfaces. This disinfection disinfects the surface, fights mold and removes dirt.
Vinegar, boric acid and hydrogen peroxide
If a large area of sealant is affected by mold fungus, you can use a mixture based on several active components.
To do this you will need:
- 4 parts water;
- 2 parts hydrogen peroxide and the same amount of table vinegar;
- 1 part boric acid.
Cleaning process:
- Mix all ingredients in a bowl.
- Warm up the liquid to 50?.
- Moisten the affected areas with a sponge.
- Leave for 30 minutes.
- Rinse with water.
How to remove hydrogen peroxide?
To eliminate fungal colonies in small areas, you can use regular pharmacy hydrogen peroxide.
Borax - an affordable folk remedy
Health-safe folk methods for combating mold on sealant include borax treatment. This is one of the safe methods for cleaning the bathroom.
To prepare the composition, take 10 parts of water to one part of borax.. Using a sponge, apply the cleaning composition and leave it on the surface for 30 minutes.
After this, the sealant is washed with water and wiped dry. Treatment with a solution is one of the simplest solutions.
Ammonia
Ammonia can be used for cleaning surfaces not only as part of mixtures, but also as a mono product. To do this, the active component is diluted in equal proportions with water and applied to the sealant affected by mold.
Leave the solution on the surface for 60 minutes. After this period, the sealant is washed with water and dried.
Tea tree essential oil
How else can you remove mold in the bathroom from caulk? Tea tree oil is used in cosmetology and medicine. Another use is to remove mold from caulk and other surfaces.
It is convenient that after treatment this product does not need to be washed off. The disadvantage of using it is the high price of natural essential oil..
Chemical substances
In addition to solutions that you can make yourself, chemical agents are highly effective. They can be purchased in hardware departments of stores.
As a rule, containers with a chemical product have a volume of at least half a liter and a built-in sprayer.
This design of the bottle allows you to spray the product evenly, getting into hard-to-reach places.
Directions for use are indicated on the packaging of each cleaning product.. Spraying is carried out evenly over the surface of the sealant. After allowing a certain amount of time for the reaction to occur, brushing is carried out.
Сillit Bang anti-stain
This liquid product is available in 750 ml bottles. The average cost of Cillit Bang is quite high - 320 rubles.
For normal cleaning, it is enough to leave the product on the surface for 5 minutes, and to eliminate fungus and mold colonies, the required exposure time is a quarter of an hour. After this, Cillit Bang is washed off with water.
ASTONISH Mold & Mildew Remover
ASTONISH Mold & Mildew Remover cleaning product is available in 750 ml bottles. The cost of this drug is lower than the previous one, around 270 rubles.
ASTONISH contains chlorine. The product is designed to effectively remove mold without the need for increased friction. Can be used on various surfaces.
In order for ASTONISH to work, it is enough to leave it for only 3 or 4 minutes, then rinse the area of application with a sponge.
Veksa Bathroom cleaner
This household chemical is intended for cleaning and bleaching surfaces and contains chlorine. It has an affordable price - from 100 rubles per 500 ml package. For normal regular cleaning, Veksa Bathroom cleaner is pre-diluted in water.
To treat, Veksa Bathroom cleaner is applied for about a quarter of an hour., followed by brushing. If after washing off the product with water the desired result is not achieved, the treatment should be repeated. Do not allow the product to dry completely on the surface of the sealant.
Unicum
Unicum spray is designed directly for removing mold from various surfaces. The volume of the bottle is 750 ml, its cost is about 260 rubles.
The active components of the drug effectively penetrate into cracks and gaps between the sealant and the tile or bathtub, which allows you to eliminate pathogenic organisms in one application.
If the fungal colony is large, re-treatment may be necessary.
Izocid (IZOCID ANTI-MOLD)
Isocide is a household chemical product that is intended for use against fungus and mold. Bottle volume – 500 ml. The consumption of this product is economical. Despite the price (from 260 rubles), IZOCID completely justifies itself. The product can be used outside and inside the building.
If the problem returns
If, despite all the measures taken to clean the sealant from mold, this could not be done, the fungus has probably penetrated into the deeper layers of the composition. To eliminate it, you will need to remove at least the top layer of waterproofing and apply a new one with an antifungal effect.
Before applying new sealant the surface needs to be treated:
- clear away debris;
- disinfect, for example, with isopropyl alcohol.
All stages of preparing and applying waterproofing must be performed very carefully. After treatment with alcohol, you need to wait 30 minutes to consolidate the effect.
Waterproofing should only be applied to a completely dry surface.. After filling the seam with sealant, it is necessary to wait the required time, preventing moisture from entering its surface.
5 important tips for prevention
Once you have removed mold from your bathroom, it is important to prevent it from reoccurring. To do this, it is recommended to adopt the following rules:
Establish good air circulation in the bathroom.- After water procedures and washing, all wet surfaces should be wiped dry.Particular attention should be paid to joints, cracks and other places where moisture accumulates.
- Wet things should not be allowed to accumulate in the bathroom, including for the purpose of drying. All sources of high humidity in the room should be eliminated.
- Periodically, when cleaning the bathroom, you need to wipe the sealant with vinegar or its aqueous solution.
- Walls, floors and ceilings must not contain cracks. All existing surface defects must be eliminated.
Conclusion
The bathroom is a multifunctional room, which is used for hygiene procedures and washing. In order to keep this room clean and mold-free, it is important to regularly treat it with special products.
