Useful tips on how to remove glue from glass on glasses

You cannot do without glue in everyday life, due to its versatility. You can use it to glue anything together.

But a drop accidentally falling on glass (for example, glasses) or other materials becomes a real problem. It will not be possible to wipe off such glue with ordinary water; other, more effective methods will be required.

How remove the glue from glasses on glasses? Let's figure it out.

What to scrub with?

There are several ways to remove adhesive (especially super glue) from glasses. For this You will need common household products that can always be found on the farm:

• dishwashing liquid;
• vegetable oil;
• soap;
• ammonia;
• any windshield wiper;
• acetone;
• Dimexide (pharmaceutical drug);
• kerosene or gasoline;
• nail polish remover.

The following tools may also be useful:

• rag napkin;
• foam sponge;
• cotton pads;
• razor blade;
• eraser;
• paper cutting knife;
• plastic spatula.

Wiper

This universal liquid product can easily cope with adhesive contamination.

Sequencing:

1. Spray glass cleaner onto the glue.
2. Wait about 20-25 minutes until the glue softens.
3. Then wipe the glass with a dry cloth made of coarse cloth or use a spatula.

It happens that the first time it is not possible to completely remove the stain (if the glue has had time to harden too much). Then the attempt is repeated as many times as necessary.

Dimexide

This is an inexpensive drug sold in every pharmacy. However, it is very effective at removing superglue that accidentally gets on the glass surface.

Instructions:

• apply the product to a cotton pad or swab;
• rub the stain, trying not to go beyond its boundaries;
• as the disk gets dirty, change it, and do this until the adhesive trace completely disappears;
• Finally, wipe the glass surface with a rough rag.

If the cotton pads are not changed during cleaning, sticky stains will form.

Acetone

Acetone is suitable as a glue cleaner. This is a strong solvent, upon contact with which even a very dried stain will be destroyed. The only disadvantage of this method is the toxicity of the liquid. So when working with it you need to use rubber gloves and a face mask.

Sequencing:

1. Soak a washcloth or cloth in acetone.
2. Begin to erase the stain, moving from the outer edge to the center.
3. Clean the glass until no trace of glue remains.
4. Upon completion of work, wipe the surface with a soapy solution, then with clean water.

Gasoline or kerosene

Gasoline or kerosene can handle any glue splashes accidentally left on your glasses.

Step by step steps:

• soak a rag with a cleaning composition;
• apply to the contaminated area and wait about 30 minutes;
• repeat the manipulation, just wait 15 minutes;
• The softened layer is removed with a rubber spatula.

Liquid soap

Regular liquid soap or dishwashing detergent will do. How to use them to remove superglue:

1. Pour warm water into the container (about 35? C).
2. Add a little soap or dish soap and mix thoroughly.
3. Soak a sponge in the solution.
4. Wipe the contaminated surface.
5. Then use a brush, which is usually used for cleaning bottles.
6. Repeatedly pass over the glass with a dry cloth.

Vegetable oil

If the glue stain has not yet set, you can easily wipe it off with vegetable oil.

How to do it:

• soak a cotton pad with oil;
• apply it to the dirt and leave for an hour;
• then remove the softened adhesive composition with a plastic spatula;
• Wipe the treated area with soapy water (you can replace soap with window cleaner) and a dry flannel cloth.

Nail polish remover

Any acetone-based liquid can successfully remove fresh adhesive stains. These include nail polish remover.

Sequencing:

1. Pour the product onto a cotton swab or disk.
2. They begin to carefully rub the stain. If necessary, change the cotton wool.
3. Finally, wipe the surface with clean water and a dry cloth.

The aggressive liquid should be applied directly to the glue. Contact with a clean surface may cause stains.

Mechanical method

To work, you will need a special scraper that will help scrape off any remaining glue from the glass. If you don’t have it at hand, a utility knife or razor blade will do.

Proceed as follows:

• a soap solution is poured into the spraying device; to enhance the effect, it is recommended to add a couple of drops of ammonia to it;
• heat the adhesive trace with a hairdryer;
• spray the contamination with soapy water;
• then cut off the sticky layer with a sharp tool, directing it at an angle of about 40 degrees, while trying not to be too zealous so as not to scratch the glass;
• After completing the procedure, degrease the surface with alcohol.

Ammonia

Another productive way to remove glue from glass is to use ammonia. What need to do:

1. Prepare a solution from dishwashing detergent (1 tsp) and ammonia (1 tsp).
2. Dip a cotton pad or sponge into it.
3. Treat the stain.
4. Rub until the glue is completely removed.
5. Polish the surface with a flannel cloth.

When working with ammonia, the room must be ventilated. Otherwise, you can be poisoned by its vapors.

How to remove with special means?

Now on the shelves of hardware stores there is a wide range of special cleaning products. Among them we can highlight the most productive ones.

Anticlean

Anti-glue is an ideal tool for removing any polyurethane-based adhesives. It has a gel-like consistency, which is convenient for application (does not spread). One tube is enough for several times, if you close it with a cap after use.

The price of a 38 ml tube is from 60 to 70 rubles. The disadvantage of anti-glue is its toxicity, since it is a solvent. Therefore, caution is required when working with it. Keep it out of the reach of children.

White Spirit

This is a gasoline solvent that is widely used in the rubber industry and in everyday life. for dissolving paints and varnishes. With its help you can easily deal with adhesive stains on any surface, including glass.

White spirit should be stored away from heat sources and open flames. In case of fire, it is unacceptable to use water to extinguish the fire.

It has a shelf life of 3 years, after which it loses all its properties. And this is regardless of storage conditions. The cost of the product varies depending on the manufacturer: foreign - from 260 rubles, domestic - from 100 rubles.

How to use it:

1. Apply the product to the contaminated surface.
2. Wait 10-15 minutes and repeat the procedure.
3. When the glue softens, remove it using a stationery knife.

Cleaner "ZM 08184"

An effective remedy in the fight against adhesive stains of any complexity. Available in aerosol form, which is convenient for application.

Advantages:

• has a pleasant orange aroma;
• safe for others;
• applicable for any surfaces;
• does not require subsequent wiping dry.

Minuses:

• not suitable for washing off fresh glue;
• highly flammable;
• does not cope with cyanoacrylate type adhesives;
• high cost - from 1.5 thousand rubles. per bottle.

To remove glue, just spray a little product and wipe with a napkin. If necessary, repeat the action.

What should you not use to clean spectacle lenses and why?

To avoid damaging glasses, remove glue Do not use abrasive materials:

• sponges,
• emery skins,
• powdered products,
• metal scourers.

It is undesirable to overheat the glass, which can lead to cracking. Therefore, when mechanically removing adhesive contamination, do not bring the hairdryer too close to the lenses and try to ensure that the heating is uniform.

Tips on the topic of the article

Some useful tips on the topic of the article:

• when choosing a method for removing glue from glasses, start with the most gentle options (for example, vegetable oil);
• rubber adhesive composition is better washed off with pure gasoline;
• Having chosen a nail polish remover, make sure that it contains acetone (otherwise it will not be possible to remove superglue from the glass);
• if a razor blade is used to scrape off the adhesive layer, then for convenience, insert it into the eraser;
• to avoid scratching the glass, it is preferable to use a special scraper for removing paint (sold in hardware departments);
• if you don’t know the type of glue with which the glass is stained, kerosene, acetone, gasoline or white spirit are guaranteed to help;
• Plant-based glue is easily removed with a mixture of two alcohols - ammonia and denatured, which are dissolved in water (all components are taken in equal proportions).

Some options can be combined to achieve the desired result faster.

Conclusion

Choosing a method for getting rid of glue that accidentally got on glass should be based on the adhesive composition. If this is an industrial cleaner, read the instructions first.There should be indicated the types of glue that the product can handle.