7 ways to remove label glue from a bottle

Glass bottles are suitable for multiple uses. Homemade juices are poured into them, wines are infused, and oil is stored.

To make recyclable containers look attractive, you need to remove the label from it, under which there is always a thick layer of glue.

Read the article on how to quickly and thoroughly clean a bottle from sticky traces of glue from the label.

How to wipe off marks?

There are many available tools that will help you cope with the problem. If no one is surprised by the process of wiping off glue with acetone, few people know that WD-40 car lubricant can cope with the composition.

WD-40

WD-40 is a liquid lubricant, which can be found on sale in any store for car enthusiasts.

The product is used to remove rust; it is enough to treat old bolts with it once and after a few minutes they will easily unscrew. Therefore, you can find such a can in every driver’s garage.

The composition has found wide application in everyday life. Resourceful housewives actively use it to remove glue stains.

1. Direct the sprayer onto the glue marks.
2. Press the button.
3. Leave the composition to act for 10 minutes.
4. Remove any remaining product with a clean damp cloth.
5. Rinse the bottle with water.

The composition is flammable; it can only be sprayed away from sources of fire.Its cost is low, the price is about 180 rubles for a 0.42 liter bottle.

How to remove with soapy water?

To get rid of glue, you can use a soap solution. It is prepared as follows:

• Grind half of the new block on a grater;
• a small amount of hot water is poured into the basin;
• Stir the soap until completely dissolved, add water until the desired volume is obtained.

To remove glue, it is better to use 72% laundry soap. It contains caustic soda and fatty acids, which help quickly remove sticky marks. Scented soap works worse on stains.

Mode of application:

1. Soak the bottle in the prepared solution.
2. To prevent it from floating, you can fill it with water.
3. After an hour, remove the glue with a brush.

You can avoid immersing the bottle in water by applying a soapy solution to the glue using a sponge. In this case, you will have to ensure that the surface remains moist at all times.

Soda

You can remove traces of glue from the glass surface using soda. For cleaning to take place with minimal effort, follow the following procedure:

• fill a suitable container with water, dissolve soda in it at the rate of 100 g per 1 liter of liquid;
• pour warm water into a bottle and lower it into the prepared solution;
• leave for an hour;
• Remove the softened glue with the hard side of the sponge.

If necessary, soda can be poured directly onto the bottle. This will improve the quality and speed of cleaning. Soaking in a soda solution allows you to quickly and effortlessly remove glue from the glass surface.

Acetone

You need to start removing the glue from the bottle after removing the top paper layer. The label is torn off by hand, and the residue is removed with warm water. When only sticky stripes remain on the surface, proceed to the main procedure.

Procedure:

1. Generously moisten a rag or cotton pad with acetone.
2. Apply the material to the bottle as a compress.
3. Leave for 10-15 minutes to take effect. If the layer is thin, you can do without pre-soaking.
4. Squeeze out excess liquid and remove remaining glue.
5. Rinse the container with clean water.

If you don’t have pure acetone at home, you can replace it with nail polish remover. The concentration of the main substance in it is not so high, so the exposure time for the glue is increased to half an hour.

How to remove with alcohol?

You can get rid of glue from a bottle using any alcohol-containing liquid. This could be vodka, cologne, glass cleaner. They all contain a certain percentage of alcohol.

You need to proceed as follows:

• saturate the sponge with cleaner;
• apply the liquid to the glass, generously moistening the problem areas;
• if the layer is thick and old, it is covered with a cloth soaked in alcohol;
• After 30 minutes, begin the cleaning procedure; after it is completed, you need to rinse the bottle with warm water.

Pure medical alcohol is most effective, but it can only be purchased at a pharmacy with a prescription.

As the cotton pad becomes contaminated with glue, it needs to be changed.. Otherwise, the softened sticky composition will simply spread across the surface of the glass. Each new disc is re-wetted in alcohol.

Solvents

To remove glue, you can use solvents designed for paint removal. They will help you quickly deal with difficult stains.

Substances such as:

1. Petrol.
2. Kerosene.
3. White Spirit.
4. Turpentine.
5. Solvent R-4, 647, 646 and others.

All substances are used according to the same scheme:

1. Moisten a cotton pad with the selected composition.
2. Use it to remove glue from the bottle. If it doesn’t come off well, the product is left on the stain to have an effect. As a rule, 10-15 minutes are enough for the solvent to soften the sticky base.
3. Remove remaining glue with a dry paper towel.
4. Rinse the bottle with clean water.

Another available solvent is vinegar essence. A high concentration of acids quickly breaks down glue molecules. You can easily clean the surface of the bottle in a few minutes. If there is no essence in the house, use table vinegar, but you will have to rub the bottle for at least 10 minutes.

Vegetable oil

When looking for an effective solution for removing glue from a bottle, you can forget about an affordable product that is available in every home. To deal with sticky marks, you can use regular vegetable oil. Any variety is suitable: sunflower, olive, flaxseed, etc.

Mode of application:

• apply oil to a cotton pad;
• wet the bottle with it and leave for 15 minutes;
• remove softened glue;
• Rinse the container with warm water and dishwashing detergent.

Helpful information

To make it easier to remove glue from the bottle, The following tips should be taken into account:

1. If, after exposure to the solvent, the glue rolls off and does not rub off, it means that the composition did not have enough time to soak the base. In this case, the procedure is repeated again.
2. If you put hot water inside the bottle, this will simplify the process of getting rid of the glue. The heat will soften it from the inside.
3. You should begin removing sticky marks immediately after removing the sticker. After time, the glue will harden, dust and other contaminants will settle on it. Therefore, it will be more difficult to deal with stains.
4. Do not attempt to remove glue using fire. Its direct contact with the glass will cause it to burst.
5. After treatment, the bottle must be rinsed not only outside, but also inside to completely remove any remaining cleaning agent. This is especially important if the container will be used for storing food.

You will find a lot of useful information about removing glue in this section.

Video on the topic of the article

5 ways to wash a bottle of glue from the label in the video:

Conclusion

Cleaning a bottle of glue is not difficult if you choose the appropriate composition for this purpose. You can deal with stains using available products, one of which is sure to be found in your home or garage.