What does error F05 mean in a Whirlpool washing machine, how can I fix it myself?

The durable and reliable Whirlpool washing machine rightfully occupies a leading position in the popularity rating among consumers.

But over time, even such a reliable washing machine breaks down, signaling problems by flashing indicators on the front panel or an error code on the information display screen.

Let's look at what error F05 is in a Whirlpool washing machine and how to fix it in more detail.

What kind of code is this, how is it indicated?

The drum of the washing machine is loaded, the working cycle is started, and suddenly at some point (most often after ten to fifteen minutes) the washing stops, and error f05 is displayed on the induction panel of the household appliance - a combination of symbols indicating problems with heating the water in the tank.

You must read the serial number of the indicator very carefully, from left to right (otherwise the error will be identified incorrectly).

Why does it appear and what to do?

There are several possible problemsthat caused error f0 to appear in the Whirlpool washing machine:

• the heating element (heating element) has failed;
• The temperature sensor is faulty;
• The control module is malfunctioning.

Let's take a closer look at what to do in each specific case.

The heating element has failed

Over time, scale (a dense crust of lime deposits formed when tap water is heated) settles on the tubes of the heating element. It is this that leads to overheating of the heating tubes and their rapid failure. As a result, the control module receives a signal that the water in the tank is insufficiently heated, as evidenced by error f05.

To replace the heating element on a Whirlpool washing machine, necessary:

1. Unplug the household appliance and move the washing machine away from the wall.
2. Drain the remaining water from the tank (an important point, since when dismantling the heating element, moisture may get onto the contacts of the heating element). Water drains through a drain hole located at the bottom of the front panel of the case.
3. Remove the back panel, carefully turning the pulley wheel and tighten the drive belt. In the lower part of the body, under the bottom of the ram, find a rounded metal plate with wires - a tubular heating element.
4. Disconnect the contacts (don’t forget to take a picture of the heating element connection diagram first).
5. Loosen the central holding bolt, push it inward, loosen the body of the heating element, and carefully remove it.
6. Install a new heating element. To do this, fix the part in the seat (before installation, do not forget to clean the “socket” from dirt), secure the central nut, and connect the wiring.
7. Fix the drive belt in its original place and reassemble the washing machine body.

Instructions for selecting and replacing heating elements in a Whirlpool washing machine are presented in this article.

Thermal sensor is faulty

Voltage surges in the home power supply network can cause the temperature sensor to fail. As a result, the control module receives incorrect information about the temperature of the water in the tank.

A discrepancy between the data received by the module and the specified parameters of the running program blocks the operating cycle of the washing machine, signaling a problem with error f05.

The temperature sensor is replaced according to the following algorithm:

1. We dismantle the heating element (the sequence of actions is described earlier).
2. We remove the temperature sensor (a metal cylinder 3 cm long and no more than 1 cm in diameter) from the rubber seal (located in the central nut holding the heating element).
3. We install a new temperature sensor.

Do not try to disassemble and repair the temperature sensor. A faulty element must be replaced!

Otherwise, operating a washing machine with a faulty water heating control sensor in the tank will lead to more serious damage, including complete failure of the household appliance.

The control module is malfunctioning

Unstable power supply can lead to a short-term malfunction of the washing machine. A reboot will help fix the problem.. To do this, the Whirlpool washing machine is disconnected from the network and turned on again after fifteen minutes.

Call the master

Help from service center specialists is an excellent solution for those who cannot resolve error F05 in a Whirlpool washing machine on their own.

You can call a specialist at home by phone (contacts are easy to find on the Internet) or by using the services of submitting online applications on specialized websites for the repair of household appliances.

When filling out a request for repairs, you must indicate: the brand of the washing machine, the year of manufacture of the household appliance, describe the problem that has arisen in as much detail as possible, and indicate the desired time for the technician to arrive at your home.

The specialist carries out inspection and diagnostics, eliminates the malfunction. The work of specialists from specialized centers for the repair of household appliances is carried out with a guarantee, which must be indicated in the report on the work performed.

The cost of the specialist’s services is pre-announced when submitting an application.. However, after the inspection, the master can change the final amount to be paid. The cost is affected by the complexity of the repair work and additional faults that were discovered during the diagnostic process.

On average, replacing the heating element and temperature sensor (the main causes of error f05 in the Whirlpool washing machine) will cost 1200-1500 rubles. The cost of parts to be replaced is paid separately.

To avoid encounters with scammers, you should not trust the repair of household appliances to persons who demand the full cost of repairs even before starting any action.

How to prevent the Whirlpool washing machine from breaking down in the future?

To avoid problems with water heating (and, as a consequence, error f05) in a Whirlpool washing machine, Some recommendations should be followed:

• connect the washing machine to the power supply network only through a voltage stabilizer (sudden changes in the network damage the control module);
• regularly clean the washing machine with special chemical compounds (scale is the main enemy of the heating element);
• practice washing at a water temperature no higher than 50C (maximum heating of water accelerates the process of scale formation on the tubes of the heating element).

Adviсe

Changing the heating element in the Whirlpool washing machine, it is very important to pay attention to the power and size of the heating element. To avoid mistakes, the seller must be informed of the markings (a combination of numbers and letters printed on the metal part of the heating element), and it is best to take the old, dismantled part with you to the store.

Conclusion

Error f05 in a Whirlpool washing machine is not a death sentence, but just a signal of problems with water heating. With a competent approach to diagnosis and repair, the problem can easily be fixed on its own.

If for some reason you were unable to restore the washing machine’s functionality with your own hands, service center specialists will come to the rescue.