How to use?

In order for an LG washing machine to wash clothes efficiently and serve without breakdowns for a long time, you need to use it correctly.

It’s not difficult to understand the functionality, since the device interface is in Russian, and each model comes with a User’s Guide. By carefully studying it, you can find answers to most of your questions.

If some points are not completely clear, read the article. It will tell you in detail about how to use an LG washing machine: about starting the device for the first time, preparing for washing, caring for the main elements and more.

Turning on the LG washing machine for the first time

One of the most important moments is the first launch of the device. The correct operation of the LG washing machine in the future depends on how correctly the LG washing machine is turned on.

The development company recommends washing it on the maximum setting for the first time; there is no need to load laundry into the drum. This will allow you to wash all parts of the device from the inside of any remaining lubricant.

User manual:

• install the device on a flat surface;
• connect hoses to communications;
• connect the device to the network;
• pour the powder into the tray - you will need half the standard amount of detergent;
• set the “Cotton” program and the water temperature to 60 degrees;
• close the hatch door and start the wash;
• wait for the cycle to complete, open the machine, wipe the cuff.

Read more about the first launch of the LG washing machine in this article about connecting a household appliance to communications - in this.

Preparing for washing in an LG washing machine

Before you start washing, you need to complete several preparatory steps. They include:

1. Sorting laundry. You need to separate it by fabric type and color. You should not load white and colored items at the same time, especially if you are washing at a high temperature.
2. Drum loading. Each model indicates the maximum weight of items that can be washed in one cycle. These values ​​range from 4 to 17 kg. Be sure to take into account the permissible weight for each specific program.
3. Checking pockets. They need to be turned inside out and any small debris shaken out. Coins, keys and other metal parts often cause damage to the device, which requires expensive repairs.
4. Preparing things. If clothing has buttons or zippers, they must be fastened. The products are turned inside out.

Mode selection

The LG washing machine has several washing modes. All of them are precisely calibrated and designed for different types of fabric. List of programs and their execution time:

1. "Cotton". The mode is intended for the care of cotton and colored fabrics, lasts 1:43-2:02.
2. "Cotton Eco". Similar to the previous mode, but allows you to save energy. Duration from 1:57 to 2:17.
3. "Everyday wash". This program is designed to care for moderately soiled items made from polyamide, acrylic and polyester. Its duration is 1:18-2:05.
4. "Mixed fabrics". Suitable for any linen, except those made from delicate fabrics. Washing lasts 1:00-1:20.
5. "Baby Clothes". The program is designed to care for children's things. Its duration is 2:27-2:37.
6. "Health care". Treatment involves a long rinse cycle, which allows you to completely wash away any remaining detergent. The cycle lasts 1:47-2:45.
7. "Duvet blanked". The mode is designed for caring for large items with down filling. Washing time 1:32-1:40.
8. "Sportswear". The program is used for washing items intended for sports activities. Cycle duration 0:46-0:54.
9. "Delicate". Gentle treatment of fabrics prone to damage. The washing time is 0:47-0:55.
10. "Wool". Suitable for caring for items made of wool, cashmere, knitwear. Duration 0:33-0:35.
11. "Fast 30" and "Intense 60". Programs are suitable for refreshing things and saving energy. They last 30 and 60 minutes respectively.
12. "Rinse and spin". Duration – 18 minutes.
13. "Spin". It lasts 13 minutes.

However, there are still a few icons on the panel. Their decoding:

• clock (dial) – delayed start;
• lock with a smile – protection from children;
• asterisk – drum cleaning;
• spiral - spin;
• basin with water - rinsing.

Detailed analysis of operating modes - in this article about washing times on different programs - in this, read about the drum cleaning mode here, on what program to wash a down jacket - Here.

Starting the device

After the items are sorted and loaded into the drum, you need to close the hatch tightly so that you can hear a click. Then the detergent is poured into the tray, using the selector, select the desired program and start the wash. If the default settings require correction, this is done manually.

Temperature

You can set the temperature of the water in which things will be washed by pressing the button with the corresponding inscription.

On some programs, changing the temperature mode is not possible, or has significant limitations. For example, in the “Delicate” mode you can wash things only at 40 or 30 degrees.

The lower the temperature, the better. This allows you to reduce washing time, save utility resources and prevent scale from appearing on the heating element.

Spin

In LG washing machines, the spin can be turned off, or set it to the following values:

• 400 rpm;
• 600 rpm;
• 800 rpm;
• 1000 and 1200 rpm (not for all models).

Where should I put the detergent?

The detergent is poured into the tray, which is located at the top of the device. To pull it out, you need to place your fingers in a special recess and pull it towards you.

The powder receiver consists of several compartments:

1. The compartment marked with the Roman numeral I is for the powder that will be used for the pre-wash.
2. Compartment number II is also for bulk detergents, but they are consumed during the main wash stage.
3. The third compartment, marked with an asterisk “*”, is intended for conditioner or rinse aid.

Read about where to fill the air conditioner Here, washing gel - herewhere to put the powder - here,

What to do after finishing work?

After completing the wash, you need to unplug the appliance and remove the laundry from the drum. There is no need to close the hatch tightly; the machine is left open so that the moisture evaporates from it.

Be sure to remove liquid from the rubber gasket, which is located between the body and the door. Then wipe the powder cuvette. If you ignore these recommendations, mold will appear inside the device, and it itself will begin to emit an unpleasant odor.

What is smart diagnostics?

LG smart diagnostics or LG Smart Diagnosis is a technology that allows you to independently identify faults.

The smart program can detect up to 80 types of breakdowns. Notifications about problems are sent to your smartphone.

To perform diagnostics, you can install the application on your phone and use it to launch the program. The second option is to call the service center operator and follow his instructions. It will tell you which buttons to press on the panel to run the diagnostic.

Both of these methods allow you to quickly detect a malfunction. Read more Here.

How to turn on sound?

If the user wants to receive sound signals from the LG washing machine, he you need to press and hold the “Timer Mode” button for 3 seconds. This can be done not only while waiting, but also while the device is running.

The setting is saved after turning off the household appliance and turning it on again. The sound is turned off in the same way. For some models, the sound is turned on by pressing and holding two buttons - “Timer” and “No folds”.

How to set delayed start?

You can postpone the selected operation for a period from 3 to 19 hours. The machine will turn on at the time set by the user.To use the timer, proceed as follows:

1. Connect the device to the network.
2. Select the timer mode (the button with a dial designation).
3. Set the required time. One press – delay for 3 hours, two presses – for 6 hours, etc.
4. Start the timer by pressing the “Pause” button.

How to care for household appliances?

From time to time you need to run the drum cleaning function. Most models of LG washing machines independently remind the owner of the need to carry out the procedure.

Enough for this find 2 buttons marked “*” on the control panel, press and hold them within a few seconds. Then click the “Start” button. The drum will begin to clean itself. This program lasts 1.5 hours.

The maintenance procedure includes regular cleaning of the filter. It is hidden at the bottom of the device, on the front side. To get to it, you need to open a small hatch.

Under its cover there is an emergency water drain hose and the filter itself. Unscrew it clockwise and remove dirt from it. and adhering debris, rinse under running water and put back in place.

How to clean the filter, read Here, about cleaning the washing machine - here.

Cleaning the tray

To properly clean the tray, it is not enough to simply wipe it with a damp cloth. It should be removed and washed periodically. To pull it out of the nest, you need to pull the container towards you.

Holding it with your right hand, press the index arrow with your finger. It is located on the cover of the compartment intended for the air conditioner. This will make it easy to remove the cuvette.

After washing it needs to be put back in place.It is enough to get into the guides, after which the powder receptacle is pushed into the device. How to remove the powder tray, read in this article.

Errors

If a breakdown occurs, an error code will appear on the device screen. It indicates which part has failed. It needs to either be repaired or replaced.

The most common designations:

• OE – the drain system is faulty, it may be clogged;
• UE – the load on the drum is unevenly distributed;
• DE – the hatch door is not closed;
• LE – engine blocking error;
• AE – automatic shutdown error;
• CE – excessive load on the engine;
• FE – there is too much water in the tank;
• IE – no water supply;
• PE – disturbances in the operation of the pressure switch;
• PF – failure in the control board;
• tE – problems in the heating circuit;
• SE – the shaft does not rotate;
• CL – panel lock is enabled;
• tCL – the drum cleaning process has started.

Read more about errors in LG washing machines Here.

Helpful information

Tips that will be useful To all owners of LG washing machines:

1. When washing for the first time, it is recommended to stay close to the device or periodically check its operation. If problems are detected, it will be possible to react in time and take action.
2. When filling the machine, you need to make sure that the laundry is completely in the tank and is not pinched by the hatch door. Such an oversight can cause damage to the cuff during washing.
3. Do not pour washing powder into the drum, this will lead to a deterioration in the quality of the wash.

He will tell you how to forcefully drain water from an LG washing machine. this publication.

Conclusion

The LG washing machine will work for a long time and properly if you use it according to the instructions for use.Following simple rules not only improves the quality of washing, but also extends the life of household appliances.