Why and how can you correctly remove the powder tray in an LG washing machine?

The quality of washing in an automatic washing machine largely depends on the condition of its simple element - the tray for loading washing powder and liquid detergents.

It is impossible to maintain it in proper order without the ability to correctly remove the container from the nest.

We'll tell you in this article how to remove the powder tray in an LG washing machine without damaging it.

Why might you need to get a powder receptacle?

The appearance of an unpleasant odor in clothes after washing indicates an accumulation of detergent particles on the walls of the tray, which leads to its clogging. As a result, the container becomes a place of localization of dampness, mold, limescale deposits and the settlement of pathogenic bacteria. This becomes the main indication for regular cleaning of the powder container.

Lack of proper care for plastic containers becomes a predisposing factor for the following consequences:

1. Deterioration in the quality of washing and possible damage to the processed product.
2. Changes in the brightness of colored items.
3. Formation of mold, limescale.
4. The hole for washing powder into the drum is clogged.

The washing efficiency and service life of an LG washing machine directly depends on proper care of the household appliance.Therefore, proper operation of the unit involves systematic cleaning of the powder compartment, as one of the important elements of the device.

Reasons for incomplete leaching of powder

The reasons for the adhesion of particles to the cuvette walls are varied. Among them:

• use of low-quality drugs;
• insufficient pressure of incoming water;
• the presence of components in the bleaches and conditioners used that create a film on the walls of the container;
• hardness of water;
• ignoring recommendations for caring for washing machine components.

How to remove the compartment from the slot?

It is possible to clean the powder compartment well only by removing it from its mounting socket. There are no particular difficulties in removing the container from an LG washing machine. However, this procedure must be performed correctly. This will prevent the possibility of damage to the cuvette body.

The main thing is not to try to act from a position of strength and pull the tray towards you. In this case, the protection option is activated, and the cuvette becomes tightly stuck in the socket. Further use of force results in damage to the tray body or mounting socket.

To prevent such mistakes, It is recommended to follow the exact sequence of simple steps:

1. Pull the tray towards you as far as possible, holding the container with your right hand.
2. Holding the cuvette in this state, press the index arrow with your left hand. It is located on the lid of the compartment intended for filling liquid conditioner.
3. After this, the tray can be freely removed by moving it towards you with your right hand.

Inserting the tray into place is easy.The main thing is to ensure that the container fits freely into the special guide grooves.

Visual aid for removing the tray:

Methods of cleansing

After removing the tray from the compartment, it must be cleaned of dirt. For this purpose, you can resort to mechanical action, use special chemicals or popular folk remedies.

Mechanical

The algorithm of actions is simple:

• immerse the tray in a container of warm water, after adding a universal detergent or washing powder;
• wipe the contaminated surface with a sponge;
• Clean hard-to-reach areas with a toothbrush;
• Use a cotton swab to treat small holes.

This method of cleaning the tray is used in the absence of mold and lime deposits.

Use of household chemicals

A wide range of household chemicals presented on the shelves can easily cope with all types of contaminants. Among the best are the following:

1. Doctor TEN. The gentle product removes minor contaminants from the plastic surface of the cuvette.
2. Frisch Activ. An effective cleaner for removing mold and old dirt.
3. Dressing Duckling. Destroys mold and bacteria.
4. Silit. Dissolves limescale and soap deposits.
5. Domestos. Softens hardened deposits of washing powder.

The use of household chemicals requires strict adherence to the instructions. Exceeding the dosage indicated in it may damage the surface of the tray.

Effective folk remedies

A worthy alternative to special preparations is cleaning the tray with folk remedies. Here are the most popular and effective recipes:

Vinegar

Algorithm of actions:

• Pour 5 liters of water at room temperature into a deep container;
• pour in 200 ml of table vinegar;
• place the cuvette in the resulting solution for half an hour;
• At the end of the procedure, wipe with a sponge and rinse under running water.

The product is effective for removing limescale from the walls of the powder container.

Lemon acid

If the limescale deposit is old, another recipe will help. Procedure steps:

1. Art. l. dissolve citric acid in 2 liters of water.
2. Immerse the powder dispenser into the resulting solution.
3. Leave for a quarter of an hour.
4. Then add 3 tsp. baking soda and wait another 15 minutes.

Whiteness against mildew

Regular whiteness will help get rid of mold. The purification technology involves performing the following actions:

• add 0.5 cups of White to 1500 ml of water;
• Immerse the tray in a spacious container and fill it with the resulting chlorine solution;
• soak for half an hour in the solution;
• Rinse the cuvette thoroughly with cold water, wipe with a rag and do not insert it into the installation socket until the smell of chlorine has completely disappeared.

Repeated use of the Whitener solution may cause the plastic surface of the powder container to yellow.

How often to clean?

In order for the LG washing machine to please you with the effectiveness of the procedures performed for as long as possible, it is necessary to regularly clean all its elements. Particular attention should be paid to caring for the tray.

There are several recommendations regarding the frequency of its treatments:

1. Remove any remaining detergent from the cuvette walls using a wet sponge at the end of each procedure.
2. Remove the tray and wash it under running hot water at least every 2-3 washes.
3. After 10 washes, it is necessary to thoroughly clean the powder container using household chemicals.

With this approach, cleaning the tray will not be difficult. The absence of old contaminants will significantly reduce processing time.

Preventive measures

It is easier to prevent cuvette clogging than to remove stubborn dirt. For preventive purposes it is recommended:

• use the cells according to the instructions - separately for dry powder, liquid products, conditioner;
• adhere to the manufacturer’s recommendations for the dosage of detergents;
• every 2–3 washes, remove the cuvette and rinse with running water;
• Wipe the tray dry first with a damp sponge, then with a dry rag after each wash.

Top 5 useful tips

To ensure that the washing machine lasts as long as possible and the cuvette does not become clogged, You can use simple tips:

1. To avoid the formation of mold, use detergents containing antibacterial components.
2. Give preference to quality detergents. They dissolve faster and do not leave residue on the walls of the tray and other elements of the device.
3. Use a special filter to purify water. This will prevent the formation of limescale deposits.
4. To avoid damaging the plastic surface of the tray or erasing the marks on it, avoid using aggressive chemicals.
5. Don't forget to machine the tray mounting socket. This is a favorite place for dirt, limescale and mold to accumulate.

With careful care of all elements of the LG washing machine, it will delight you not only with its appearance, but also with the effectiveness of the procedures performed. Keeping the unit clean is a guarantee of a long shelf life of the device.

Conclusion

Cleaning the powder tray in an LG washing machine – a mandatory procedure that does not require much time and funds. However, ignoring the recommendations for removing and handling this item may result in damage to it. This can negatively affect the quality of washing and lead to breakdown of the entire system.

In addition, we should not forget that the spread of bacteria and mold fungi that get on things during washing poses a serious threat to health.