Simple instructions on how to clean the filter in an LG washing machine
Complex home appliances, such as an LG washing machine, require preventive maintenance. One of the necessary measures is cleaning the drain filter.
This is a relatively simple procedure that can be performed even independently, without using the servants of masters.
Read on to learn how to clean the filter in your LG washing machine.
Content
How often should I clean?
Cleaning the drain filter in LG is one of the stages of periodic maintenance of the washing machine. Such treatment is necessary for the normal functioning of the drain pump. The filter itself is a barrier that protects the pump from foreign small objects and debris, for example, lint from fabrics that are washed.
You should proceed from the frequency of washing, as well as from whether things with pellets or artificial fur got into the drum, which could get into the filter part and build up in it. If you have washed items such as a down jacket with natural filling, then it is advisable to organize unscheduled cleaning - immediately after the problematic item has been washed.
Work algorithm
The drain filter in LG is located on the front side of the washing machine at the bottom.To clean it, you should prepare the equipment that may be needed.
Tools
For cleaning it is necessary take care of the following equipment in advance:
- a wide, low container for draining remaining water from the washing machine;
- rags that absorb water well;
- A small, easy-to-clean brush, such as an old toothbrush.
It is also advisable to have access to running water to wash the removed filter. If this is not possible, you will need a bucket of water. In advanced cases, if the filter has not been washed for a long time, a solution of citric acid may be needed.
Preparing for cleaning
Before carrying out work, you should make sure that the LG washing machine is disconnected from the electricity. The water supply to the device must be shut off.
Procedure
Cleaning algorithm:
- Open the panel that covers access to the unit from the outside.
- Release the emergency drain hose.
- Place a rag on the floor.
- Prepare a container for draining.
- Remove the cap from it and drain the water into the prepared container. If there is a lot of water, you can periodically empty the container by clamping the tip of the hose with your hand.
- Install the plug in the hose and refill it in its original place.
- Turn the drain filter counterclockwise only partially at first. Even after draining the water through the hose, a small amount will still leak out.
- Unscrew the filter completely and pull it out.
- Clean and rinse the filter in water, using a brush if necessary. First, large debris is removed, then small debris is cleaned. You can use hot water, but not boiling water, as otherwise the part may be deformed
- Place the filter in its original place. It is necessary to ensure correct installation, avoiding distortions and loose fit.
The video will show you how to clean the filter of an LG washing machine:
Functionality check
In order to ensure that the filter is installed correctly, it is necessary to start the device. To do this, plug in the LG washing machine and open the water supply tap to the washing machine.
To check, you can run not a whole cycle, but a test rinse. If water begins to appear under the device, it means that the installation was carried out incorrectly.
Until the bezel in the filter area is in place, you may even be able to see water seeping through. In this case, you should reinstall the filter, also first turning off the power to the washing machine and turning off the water.
Possible difficulties
The difficult moment is most often associated with the inability to unscrew and remove the filter. This situation is typical for situations where cleaning has not been carried out for a very long time, and the cavity is literally clogged with debris.
Or when an object falls inside that obstructs movement. This could be, for example, a jammed bra wire thread.
If such a problem occurs, you can, with great caution, try to remove the filter by using pliers to turn the handle. You need to act very carefully so as not to break the part..
If you still cannot remove the filter, you can access it in a more complex way. To do this, partially disassemble the LG washing machine from the rear wall and get to the problem part through the pump.
Cleaning the filter by a professional will cost an average of 1,400 rubles in the capital, if additional disassembly of the device and repairs are not required.
What happens if you don't clean it?
Ignoring Cleaning Can Have Unfortunate Consequences and can even lead to component failures.
Unpleasant smell
If the filter is not cleaned, dirt, mucus and debris will accumulate in it. This is a suitable environment for the development of microbes. The constant presence of moisture causes all these accumulations to begin to smell unpleasant, spreading the stench to the tank and drum. As a result, things will also begin to emit an unpleasant aroma after washing.
Deterioration of drain
A clogged filter part of the LG washing machine prevents the water from draining normally. When completely filled, it can even completely block the flow of used water into the sewer.
Pump failure
If a foreign object that has already entered the filter slips back into the pump, the pump may break. The impeller blades and the impeller body itself are in the “risk zone”. If this happens, the pump will have to be replaced.
Preventive measures
Despite the fact that the filter catches many small objects, including specks of dust, It is advisable to adhere to the following preventive measures:
-
You should not send things for washing that have lint and hair coming out of them.They are not only capable of clogging the drain filter, but also accumulate on other parts, including the heating element, literally welding to it and causing rapid wear of the heating element.
- Do not allow small objects to get into the drum while relying on the filter.Coins, nails, paper clips and other similar objects can cause a lot of trouble, including damaging heating element tanks.
- If the filter is broken, it must be replaced.
Conclusion
When using an LG washing machine, you must know how to clean the drain filter. This should be done periodically to prevent more serious damage. In the event that you cannot do this on your own, you can call a specialist.
