In what cases and how to correctly replace the hatch cuff of a Samsung washing machine?

The sealing lip on the hatch of front-loading Samsung washing machines is a very important detail.

It provides a seal during the washing process, preventing water from escaping through the door.

We will tell you in this article how to replace the hatch cuff of a Samsung washing machine.

When should you change?

If the cuff needs to be replaced, can be determined by the following characteristics:

• the wear of the rubber is visually visible - the presence of cracks, loosening of the edges, the appearance of roughness and unevenness on the rim, etc.;
• During the washing process, water leaks from the hatch.

The cuff must be changed immediately as soon as one of the above symptoms is noticed. Ignoring these circumstances can lead to more serious unpleasant consequences

Preparation

Preliminary work on replacing the cuff includes two types of work: preparing the necessary tools (screwdrivers, rags, etc.) and the washing machine itself.

Before starting repair work to replace the cuff, necessary:

• disconnect the washing machine from the power supply by unplugging the plug from the socket;
• shut off the water supply;
• empty the drum from things;
• drain the remaining water through the filter, access to which is located on the front panel at the bottom;
• pull out the cuvette to fill in the washing powder;
• pull out the machine so as to provide free access to both the rear and front sides.

How to remove and change?

In order to replace the sealing collar on the hatch, you will have to partially disassemble the washing machine. To do this you will need tools.

Step-by-step procedure for removal cuffs:

1. From the back wall of the washing machine, in its upper part, unscrew the screws that hold the top panel.
2. Standing behind the washing machine, pull the top cover towards you and remove it.
3. Go to the front side of the car.
4. In the upper part, near the powder receptacle, unscrew the screws that hold the panel with indicators and buttons.
5. Inspect the end faces at the top. In some models, the mounting of this horizontal panel may differ in the number and location of screws.
6. Move this panel towards you. This must be done very carefully so as not to break the contacts or break the wires coming from the control module, which is located directly behind the panel.
7. It is advisable to disconnect the contacts (terminals) so that you can safely remove the control unit and put it away. If the wiring allows, the panel can be placed on top of the machine without disconnecting.
8. In order to release the outer part of the cuff, you need to find a wire fastening under the elastic band that goes along the entire circumference and secures the rubber. At the bottom there is a spring insert.
9. Use a screwdriver to pry up the wire and remove it, releasing it from under the rubber.
10. Separate the free edge of the cuff from the outer part of the machine body along the entire perimeter and bend it inside the drum so that it does not interfere.
11. Unscrew all the screws that hold the front side of the washing machine. Depending on the model, there may be a different number of them.
12. Remove the front panel.
13. Unscrew the clamp holding the cuff.
14. Remove the cuff completely.
15. Clean all joints and areas that were under the rubber.To do this, you can use detergent and a brush or sponge.

Procedure for installing a new one cuffs:

1. Put on the new cuff together with the clamp and carefully tuck it in.
2. Check that the fastening inner ring that holds the cuff is tucked into the recess on all sides.
3. Tighten the fixing screw until it stops.
4. Install the external façade panel. Secure with screws.
5. Install the outer part of the elastic, bringing it to the front panel.
6. Install the outer wire clamp.
7. Continue the assembly process, checking how the disassembly was carried out.

To facilitate assembly, you can take photographs during the disassembly of the machine. It is better to put all the removed screws and clamps in order, so as not to confuse anything later.

After completing work on replacing the seal, it is necessary to carry out a test wash., monitoring the condition of the cuff.

A video to help you learn in detail about the process of replacing the sunroof cuff:

Call a specialist and price of work

Repairing a machine to replace the hatch cuff is a relatively simple process, but it requires care and skill in handling equipment. If you do not have such knowledge and skills, then it is better to call a specialist from a company that services washing household appliances.

When calling a repair specialist, you must describe the problem., and also tell you if there is a new cuff that needs to be installed. At a time convenient for the client, the master will come to the house and carry out repair work.

To have confidence in the quality of the repairs, it is advisable to call a specialist from a specialized company that has permission to carry out the work. You can find such a company via the Internet by entering your city in the search.

The cost will include labor and the price of a new cuff if the artist brings his own.

The amount of payment may vary by region, city and company. The work alone will cost from 1,000 rubles.

If the technician uses his own consumables or carries out additional work to repair other components, the cost will be higher.

A private master, unlike a representative of a self-respecting company, does not provide an official guarantee and is not responsible for the quality of repairs. In addition, there is a chance of falling for scammers who can remove the parts, take money to buy new ones and simply disappear.

Prevention measures

To avoid problems associated with the hatch cuff, The following expert advice should be taken into account:

1. When putting things into the drum, you need to make sure that sharp objects that can damage the washing machine, including the sealing rubber, do not get into it.
2. Do not allow water to stagnate in the sealing collar recess or have foreign objects in it.
3. When caring for the washing machine, in the process of cleaning the rubber rim, do not use objects with an abrasive surface, as well as scratch, scrape the cuff, or make any effort when cleaning it.
4. When putting things into the drum of a washing machine, there is no need to tamp them down, overload them by weight, or forcefully push in oversized items.
5. After placing things in the drum, the door should close without effort. Things should not hang down, lie on rubber, fall into the lock groove, etc.
6. Rubber parts should be protected from pets that may chew on them.

Conclusion

You can replace the washing machine cuff yourself if you have the appropriate skills and a set of screwdrivers, or by turning to the services of a specialist. It is important that the part being replaced is identical and fully matches the parameters of the Samsung washing machine.