Why does error e9 appear on the display of a Samsung washing machine, how can I fix it?

Samsung washing machines are distinguished by well-thought-out functionality. If something goes wrong in the equipment, it signals this with a special code that appears on the screen.

One of these alphanumeric values ​​is error E9. Read the article about what error code E9 means on a Samsung washing machine and how to deal with it.

What does the code mean?

Error E9 indicates that a leak has occurred or the tank has drained water on its own. Depending on the washing machine model, this the code can be denoted as follows:

• LE;
• L.C.;
• LE1.

If the device is not equipped with a screen, then specific LED signals will indicate a leak, namely: the BIO 60 and cold wash temperature indicators will light up, and the buttons for all modes will begin to flash in parallel.

Decoding

Error e9 appears if the water level sensor detects a drop in the drum 4 times in a row within a few minutes. This is why users often find a soapy puddle on the floor.

The code may appear either a few seconds after the cycle starts or a few minutes after it starts., after the machine has filled and drained water several times.

Reasons for appearance

Among the possible reasons for the appearance E9 errors are highlighted:

1. Incorrect hose connection. If he does not make the top loop, then the water will go down the drain by gravity. First, the device will draw and drain water, after which a characteristic error will appear on the screen.
2. There is a blockage in the powder tray area. It may become clogged with detergent residue, causing water to leak onto the floor.
3. Poor quality powder or hand wash detergent is used.
4. The aquastop sensor has failed.
5. The pressure switch was damaged.
6. The pipe located near the washing machine tank is damaged. The reason for the violation of its integrity can be a sharp object, for example, a nail, needle or pin.
7. The wires inside the system have shorted or they have been broken.
8. The cuff is damaged, most often due to accidental entry of solid debris into the drum. Sometimes it dries out, loses its elasticity and leaks due to prolonged use.
9. The electronic module responsible for the operation of the washing machine has failed.

Some errors can be resolved on your own; other problems will require the help of a specialist.

How to fix it on your own?

Some problems that lead to error e9 can be corrected yourself, but first you need to find out the cause. Self-diagnosis is carried out as follows:

• inspect the hose for damage;
• assess whether the hose is connected to the sewer correctly;
• inspect the filters and their correct installation;
• check the detergent tray; if it is clogged, remove it and wash it;
• inspect the cuff for damage to its integrity;
• check all pipes;
• inspect the wires and terminals.

Once the cause is determined, you can begin to eliminate it.

Replacing the Aquastop sensor

The most common cause of error e9 is a breakdown of the Aquastop sensor, which is located in the pan. To replace it, take the following actions:

1. Remove all fastening elements from the pallet.
2. Remove it.
3. Disconnect the wires, disconnect the latches and remove the sensor.
4. Attach a new part in the same way.
5. Assemble the washing machine.

The cost of the sensor is about 1000 rubles.

Failure of the pressure switch

Another reason for the appearance of error e9 is the failure of the pressure switch (water level sensor). It's easy to replace it yourself, if you follow the following sequence of actions:

• unscrew the bolts that secure the cover to the machine and remove it;
• disconnect the sensor by disconnecting the wires;
• release the clamp and remove the handset;
• install a new part, assemble the washing machine.

The price of a new pressure switch for a Samsung washing machine is 1,300 rubles.

Damaged cuffs and pipes

If the cuff is damaged or has lost its elasticity, it must be replaced. It is difficult to cope with this task on your own.

First you need to remove the upper clamp, then remove the elastic band and the inner clamp.

To get to the hatch cuff you will need to remove the front panel of the washing machine. If possible, it is better to entrust this complex work to a specialist. Incorrect actions may cause damage to the body and cover of the machine.

If the pipe fails, you can access it through the bottom. In addition to the part itself, you will need to purchase new fasteners. It cannot be reused.

If you are not sure that you will be able to replace the part yourself without loss, it is better to contact a specialist.

When should you call a specialist?

Only a master can cope with some breakdowns. Without professional knowledge and specialized tools, it will be difficult to do this yourself.

Depending on the complexity of the work, the chosen workshop and the locality, the price may vary. However, there should not be a significant difference. You can try to save money by contacting a private master.

Services and their cost:

1. Replacing the cuff. Signs of breakdown: error E9 appears, there may be no water on the floor, but the pan will be full. If a complete replacement of the rubber band is required, the cost of the work will be 1,900 rubles. When the damage is minor, the cuff can be turned with the hole up and sealed. Additionally, you will need to pay the cost of the seal itself.
2. Replacing the pipe. Signs of breakdown: the machine displays an error, water appears in the pan and on the floor. The cost of work is 1800 rubles.
3. Replacing the pressure switch. Signs: error E9 appears, the machine does not start washing. The cost of replacing the sensor is 1900 rubles.
4. Replacing the electronic control module. Signs: a breakdown can occur at any time; the machine either completely breaks down or displays an error. The electrical circuit needs to be replaced or repaired. The minimum cost of work is 2400 rubles.
5. Replacing the Aquastop sensor. Signs of failure: no water, an error appears. Cost of work – 2400 rubles
6. Replacing the drain hose. Signs: a leak appears at the back of the washing machine, a code appears on the screen. The cost of replacing the hose: 1400 rubles.
7. Replacing wiring. Signs: the code appears on the screen and then disappears. Cost of service: from 1800 rubles.

Prevention of the problem

Prevent error E9 from appearing The following recommendations will help:

• to prevent damage to the cuff or drain hose, before washing you need to carefully check the pockets and remove all sharp objects from them;
• To wash things, you can use a powder marked “Automatic”; a product marked “hand wash” is not suitable;
• The powder tray must be removed and cleaned regularly;
• in a private house you need to take care that there are no rodents - they often damage wires by gnawing them;
• If the plugs in your apartment regularly break, you need to call an electrician to fix the problem.

Adviсe

Information that will be useful to all owners of Samsung washing machines:

1. Code e9 appears on the screen of those devices that were released before 2007. On later models it is found in other modifications.
2. If the machine is under warranty, you should not repair it at your own expense. This should be done by the specialists of the company service center.
3. To protect yourself from scammers, it is better to contact a large company that repairs household appliances.

You can find out about all the error codes of Samsung washing machines Here.

Video on the topic of the article

Why the Samsung washing machine displays error code LE1 (e9), the video will tell you:

Conclusion

Error E9 can indicate either minor breakdowns or serious damage. If you are unable to eliminate the cause that caused the code to appear on your own, you need to contact a specialist.