Simple recommendations on how to clean the drain filter in a Samsung washing machine
The drain filter is necessary to protect the pump of the Samsung washing machine from small objects.
Thanks to its presence, hair, threads, handkerchiefs, and coins do not get stuck in it. However, the filter itself can become clogged with any debris.
To learn how to clean the filter in a Samsung washing machine yourself, read the article.
Content
When is cleaning necessary?
The filter needs to be cleaned as it gets dirty. Experts recommend performing this procedure for preventive purposes once every 2-3 months.
For Diamond series devices, you need to clean the filter at least 5-6 times a year. The more actively household appliances are used, the more often the procedure should be carried out..
Provided that an animal lives in the house, these deadlines are shifted. As practice shows, the filter needs to be cleaned after every 10-15 washing cycles.
If you ignore the advice, then one day the filter will clog. The machine will not be able to drain the water in the usual way and will have to carry out this procedure in emergency mode. In this case, an error code will appear on the screen 5E, 5C or E2.
Error E2 is typical for those machines that were released before 2007. Other codes appear on more modern models. Error 5E and E5 should not be confused. Code E5 indicates a malfunction in the water heating system, and not a clogged filter.
Not all Samsung washing machines are equipped with a screen.If it is not there, then a clogged filter will be indicated by a burning 40 degree indicator and flashing lights in all operating modes. If there is no error, but the part is clogged, the water after washing will drain more slowly than usual.
Where is the filter element located?
The cleaner is located at the bottom of the Samsung washing machine. In devices with horizontal loading, it is located on the front wall, at the bottom right side.
The part is covered with a rectangular cover. If the machine was produced a long time ago, then the pump can be found under a removable plastic false panel.
In top-loading appliances, the filter can be found under the panel at the bottom, on one of the sides. However, such models are rarely found in Russian stores.
Preparing for cleaning
Before starting the main procedure, you need to perform a number of preparatory activities:
- Turn off the water supply tap.
- Disconnect the device from the network. This is a mandatory condition to avoid electric shock.
- Prepare the tools needed for cleaning.
- Using a screwdriver, coin or knife with a rounded end, pry off the hatch cover that covers the part.
- Holding the protrusion on the filter, turn it counterclockwise 60 degrees and wait until the water drains out.
This completes the preparation. You can take out the part and start cleaning. The recess into which the filter is screwed is called a snail niche.
Instructions
By following the step-by-step instructions for cleaning the filter, you will be able to quickly cope with the task. Having successfully carried out this procedure once, it will not cause difficulties in the future.
What tools are needed?
To carry out the work you will need the following tools:
- old toothbrush;
- slotted screwdriver;
- pliers;
- a rag or container for collecting water;
- flashlight;
- tweezers or small scissors;
- citric acid and water.
Cleaning process
The cleaner is unscrewed using a rotational motion. You need to turn it counterclockwise. If cleaning is carried out in emergency mode, it is necessary to lay a rag to prevent water from spreading across the floor.
The procedure for cleaning the debris trap does not always go smoothly. When carrying out this procedure, you may encounter the fact that the part cannot be removed the first time. Most often this happens when it is rarely removed. Scale or foreign objects may prevent removal.
Another way to remove the filter from the niche is to remove the drain pump. However, this process is more labor-intensive and difficult to cope with on your own.
When the filter is in your hands, it must be rinsed under running water. It is recommended to use an old toothbrush to remove dirt and debris.. If the hair and threads are very tangled in the mesh, you can use nail scissors and carefully trim them.
When the part is cleaned, there is no need to rush to return it to its place. You should take a flashlight and shine it into the hole from which it was removed.Having found the impeller of the drain pump, remove debris from it and remove wound hair and threads. To do this, you can use tweezers.
When the dirt is removed, put the filter back, twisting it clockwise. It must be screwed tightly. After completion of work, close the lid.
If there is a lot of scale and mold on the filter, you can remove it with citric acid. The part is soaked in a weakly concentrated solution for 2 hours. After this treatment, the mesh is washed with clean water.
Example for Samsung Diamond washing machine
Instructions are always more understandable if they are analyzed using a specific example.. A step-by-step algorithm for dealing with emergency drainage is considered for the Samsung Diamond washing machine model:
- Open the hatch behind which the purifier is hidden.
- Remove the drain tube from the hook and pull it out.
- Remove the plug from the hose and drain the water.
- Install the plug and return the hose to its place.
- Proceed to clean the filter according to the instructions given above.
How to check if the machine is working after the procedure?
Once cleaning is complete, the part must be properly reinstalled. In this case, troubles can be avoided.
What problems might you encounter?
If a puddle of water forms on the floor after cleaning, this indicates the following problems:
- the part is not completely screwed in;
- during its installation, there was a misalignment in the threaded connection;
- The elastic band acting as a gasket was damaged.
The first two problems can be quickly resolved by reinstalling the filter. If the cause is hidden in a damaged seal, it must be replaced.
The worst thing is if the thread breaks when trying to remove the filter. In this case, you will need to replace the pump volute or the filter itself.
You will find all the most important and useful information about Samsung washing machines in this section of the site.
Video on the topic of the article
The video will show you how to clean the filter in a Samsung washing machine:
Conclusion
Cleaning the drain filter in a Samsung washing machine is an easy task. You can deal with it on your own in a few minutes.. When using the device regularly, this procedure is mandatory, as it helps to avoid malfunctions in the operation of the equipment.
