For what reason does the Indesit washing machine not turn on, how to fix it?
Washing machines from the manufacturer Indesit are reliable. But they can also fail, causing a lot of trouble for the owner.
Sometimes a household appliance simply does not turn on. How to fix this failure depends on the type of failure. In some cases, it is very easy to eliminate it even on your own, without special knowledge.
In this article we will tell you why the Indesit washing machine does not turn on and how to fix the problem.
Content
Reasons for failure of the Indesit washing machine
A situation in which the washing machine does not turn on at all may be due to a number of reasons:
- The plug or socket is damaged.
- Lack of electricity in the house.
- Cord damage.
- Control module failure.
- Noise filter malfunction.
- Broken "On" button etc.
Do not allow uncontrolled moisture to enter the body of the washing machine, power surges, or careless handling of the wiring. Any negligence when operating a washing machine can ultimately cause major problems and costly repairs.
Troubleshooting: where to start?
When starting to troubleshoot a failure, it is better to proceed from diagnosing the more frequent and simpler problems according to statistics, gradually moving on to more complex ones.
No electricity supply
If the Indesit washing machine does not respond to the power button, then you need to check if there is electricity supply.
It may not even be in the entire house. If electricity is supplied to the washing machine via a separate line, this should be checked.
It is easy to verify the presence or absence of electricity - just turn on the light in the room or insert some electrical appliance into the socket intended for the washing machine and turn it on. Even a table lamp is suitable for experimenting.
You should also check whether the plug fits well into the socket and whether the contact necessary for operation is provided. If the plug is loose or the socket has visible scorched spots, repair is required.
If you have specialized knowledge, you can carry it out yourself, if they are not there, seek the help of an electrician. Work with electrical communications is carried out with no power and in compliance with safety precautions.
Power cord problem
If installed and used correctly, the power cord is rarely damaged. But it is necessary to check it for external defects.
Possible problems:
- crushing by furniture or other objects;
- bend;
- damage due to frequent bending and straightening of the wire;
- damage by pets, etc.
Check wiring
A problem with the washing machine's power supply may be indicated by erratic blinking of the indicators.The reason for this may be bad contacts, loose connectors, etc.
Most often the problem appears during prolonged use. and is caused by wear and vibration during operation. Inspecting all contacts and nodes with electrical connections will help correct the situation.
What's broken and how to fix it?
In situations where simple failures are not confirmed, it is necessary to move on to a serious analysis of the components involved in the process of turning on the washing machine.
Interference filter
An interference filter is a part that is designed to dampen electromagnetic waves coming from the device. This eliminates the possibility of interference with other equipment in the house. Another property of the FPS unit is the protection of the control unit from voltage surges.
To fix the problem, you must:
Turn off the water supply to the washing machine.- Disconnect the machine from the power supply by removing the plug from the socket.
- Remove the back wall by first unscrewing the screws holding it in place.
- The mains capacitor is located near the side wall of the machine.
- Disconnect the part by unfastening the supply wires.
- If the filter is burnt out, it must be replaced.
- If no external defects are visible, the part is checked with a multimeter. The FPS, which is in working condition, is returned to its original place.
- Reinstall the back wall.
After replacing the damaged part, you should check the operation of the washing machine.
Power button
First, you can simply inspect the button. If it is stuck or loose, this may affect its performance.
The button is checked using a special device - a multimeter. To diagnose the node, you should make a call. The device will not respond to a non-working button.
Control module
The control module plays the role of the “brain” of the washing machine. For diagnostics and inspection, the unit should be removed from the machine body by disconnecting the wires. If the tracks, varistor (semiconductor resistor) or other board elements burn out, it is necessary to carry out high-quality diagnostics.
The video will tell you about repairing the control module:
Washing mode does not start
If after pressing the power button the indicators and display light up, this does not always indicate that the washing machine is ready for operation. Failure to start the wash may indicate a malfunction of the hatch locking device. It talks about this problem "lock" symbol on the display.
Access to the unit that is failing is from the hatch. To do this, you must partially disassemble the washing machine to get to the lock.
Work order:
- open the door;
- the cuff must be folded inward;
- remove the clamp;
- unscrew the screws and remove the lock;
- disconnect the wires.
Electronics testing is carried out with a multimeter. If everything is in order with the lock, then the fault should be looked for in other elements - pressure switch, pump, etc.
Calling a specialist: where to go and how much to pay?
If your washing machine malfunctions, you need to make a decision: fix the problem yourself or entrust this matter to a specialist. If you cannot cope with the failure, then you can turn to professionals for help.
You can search for a company that repairs Indesit washing machines on the Internet by indicating the name of your city.The cost of work depends on the complexity of the breakdown, and can vary significantly by region.
It is advisable to seek help from companies that have been providing services on the market for a long time and value their reputation. The master who came on call carries out repairs and guarantees its work.
But if you randomly select a specialist from an advertisement, there is a chance that you will fall for scammers and allow a low-skilled technician to approach your equipment. In this case, there will be no confidence that the work to eliminate the failure will be carried out efficiently.
On average, the price for repair work in the capital is within the following limits:
- replacing a button on the control panel – from 1,000 rubles;
- replacement of FPS – from 1,400 rubles;
- replacement of the control unit – from 2,000 rubles, etc.
A lot of important and useful information about the repair of Indesit washing machines is presented in this section.
Conclusion
If the washing machine does not turn on and does not start working, this does not mean that the breakdown is complex. By diagnosing the operation of systems, moving forward step by step, it is possible to determine what exactly caused the failure and which unit needs repair.
You can deal with some defects and problems yourself, but in case of complex failures it is advisable to call a specialist.
