What could be the reasons that the drum in the Indesit washing machine does not spin, how to eliminate them?
When you select the operating mode of the washing machine and press the start button, a situation may arise when the machine draws water, but the drum does not spin. Also, this problem sometimes arises already during the washing process.
To resolve the issue, it is necessary to analyze the situation by conducting accessible diagnostics. In some cases, you can even get your washing machine working on your own - without a technician.
Why the drum in the Indesit washing machine does not spin, we will tell you how to fix the problem in the article.
Content
Why do problems occur?
If the washing machine drum does not rotate, turn off the machine. To do this you need to do the following:
- Remove the plug from the socket. This is necessary to de-energize the washing machine.
- Forcefully drain the water. This must be done using a drain filter located at the bottom of the front side of the machine.
- Open the hatch door and remove the laundry from the drum.
Among the common reasons for drum failure the following:
- rotation jammed due to a foreign object;
- drum pulley failure;
- problem with the drive belt;
- engine breakdown;
- drum overload;
- abrasion of graphite brushes;
- failure in the control module.
In addition to the situation where the drum completely stops, unstable operation is possible when the rotation occurs jerkily or with pauses. This is also a reason to carry out diagnostics, identify and fix the breakdown.
Diagnosis of failure and its elimination
After stopping work, it is advisable to determine at what stage of the wash the failure occurred. The underwear itself can help with this.
The following options are possible:
- If the items are not soapy, but simply wet, but the drum has stopped rotating, most likely during the spin phase.
- If the items are soapy and in detergent, then the problem arose at the start of work or during the first stage of washing.
Foreign object
Foreign objects that have fallen into the drum from clothes - the contents of pockets, torn buttons, underwires from a bra, etc. - can cause a malfunction of the washing machine.
As a rule, with such a breakdown, the washing machine makes extraneous sounds - grinding, scratching or tapping - before the drum stops rotating.
Sometimes the stuck item sticks out inside the drum and it can be pulled out carefully. But if a foreign object is between the drum and the tank, you will have to partially disassemble the machine to get to it.
To do this, you need to remove the heating element of the machine, the heating element, and, using a flashlight, examine the free space. After the “culprit of the failure” has been found, it is carefully removed using a wire loop.
Work to remove a foreign object must be carried out as carefully as possible so as not to damage the parts of the washing machine.
Tank overload
Any washing machine is designed to load items of a certain weight.. This information allows you to control the process of storing laundry and prevent overload.
Exceeding the permissible value can lead not only to a stop in work, but also to provoke rapid wear of components that will bear a load not intended by the manufacturer. If the drum does not spin due to the fact that things are stuffed to capacity, some of the laundry should be removed.
If you have doubts about how many things to put in the drum, then it is better not to add a little than to overload the device.
Bearing jam
Support bearings, of which there may be one or two, wear out during operation washing machine. If the wear of parts is significant, the seals begin to leak water. This leads to corrosive processes.
As a result, the rusted bearing does not perform its functions, and its jamming causes the drum to stop rotating.
Engine failure
One of the following factors can lead to motor failure:
- short circuit;
- physical wear of brushes;
- winding break;
- contact break.
All of the above reasons for the failure make the washing machine impossible to operate. When the turns on the electric motor winding are shorted, the washing machine is unable to operate under load. In this case, the engine may hum, but the drum will not move.
A violation in the contact circuit, including a break, leads to a stop in the engine. Most often, repairs require dismantling the electric motor.. Based on the results of the inspection, the technician makes a decision to repair or completely replace the part.
Another possible breakdown associated with the electric motor is wear of the brushes. This problem can arise during long-term use. The material of the carbon brushes wears off over time, and the part ceases to perform its functions. The malfunction is eliminated by replacement.
Electric motor breakdowns occur less frequently than other operational disruptions.
Drive belt slipping or breaking
The drive belt is designed in the design of the washing machine to transmit rotation from the electric motor directly to the drum. During operation, the belt may slip out of the grooves or tear.
This type of breakdown is indicated when the drum can be freely rotated by hand, but the motor is still humming.
In the case when the belt simply jumped off, it is returned to the pulley. This repair can be done from the rear wall. If the belt breaks, it is not repaired, but replaced with a new one.
In a situation where a problem with a belt occurs not for the first time, You should pay attention to the following points:
- Does the belt match the washing machine model?
- Is the belt worn correctly?
- Are there any flaws on the pulley?
Control module failure
The control module is an element that is responsible for transmitting commands to nodes. Malfunctions in its operation are eliminated by specialists after high-quality diagnostics using special equipment.
A module failure may be due to one of the following reasons:
- installation of low-quality elements;
- failure situations as a result of voltage surges;
- violation of contacts;
- natural wear and tear of circuit elements.
If the failure is a one-time situation caused by a random combination of circumstances, then you can try to reset the settings. But if work has not been restored, you will need the help of a specialist.
Calling a master: where to find and how much to pay?
It is not in all cases possible to repair a washing machine yourself. If there is no special knowledge and tools, It is advisable to contact the repair service.
You can find such a company on the Internet. There you can read reviews of the work of the masters and study the price list.
The cost of calling a technician is determined by the complexity of the breakdown, the need to use additional equipment for diagnostics, replacement of parts and assemblies. The price of services may differ by region and fluctuate even within the same city, as it is determined by the pricing policy of the company.
Average cost of work in the capital:
- belt replacement – from 900 rubles;
- replacement of motor brushes – from 1,400 rubles;
- broken wiring – from 1,500 rubles;
- replacement of bearings - from 3,300 rubles, etc.
If replacement parts are required, their cost will be paid separately by the customer.
Companies that operate officially must provide a guarantee for the work carried out by the master.
What to do to prevent breakdowns?
In order for the Indesit washing machine to serve for a long time, and a situation in which the drum does not spin does not arise, The following recommendations should be taken into account:
Even at the stage of putting laundry into the drum, you should control that foreign objects do not fall into it - go through things, check pockets, sew on loose buttons, etc.- If the washing machine begins to make unusual sounds during washing - grinding, tapping, etc., its operation must be stopped immediately, even if the drum has not stopped and continues to spin.
- Zippers must be fastened on items before washing.
- Unstable operation of the device is a reason to understand the causes of the failure and eliminate them in a timely manner, before serious breakdowns occur.
- The washing machine requires careful handling. Do not place containers with liquid on top of it, which could spill and damage the control module located at the top of the device.
- Detergents chosen for washing should be intended for automatic machines - they do not form excessive foam and do not pose a threat to the mechanisms.
Periodic inspection of your washing machine will help it work longer without breakdowns.
Video on the topic of the article
Why the drum in the Indesit washing machine does not spin, the video will tell you how to fix the problem:
Conclusion
In a situation where the drum in the Indesit washing machine does not spin, it is necessary to eliminate the cause of the breakdown. In some cases, it is possible to cope with the failure on your own, but in case of serious violations you cannot do without the help of a qualified technician.
