Overview of operating modes of the Electrolux washing machine

Modern models of Electrolux washing machines are equipped with many programs and additional functions that make the process of caring for clothes as easy as possible.

Understanding the purposes for which a particular program is intended simplifies the process of operating a household appliance as much as possible and helps to achieve the highest quality washing.

We will tell you more about the modes of the Electrolux washing machine below.

What programs are there?

There are two groups of modes: basic and additional. Basic programs and modes are mandatory installed on each washing machine model.

Prewash

Used in conjunction with the main wash mode. Helps remove old, stubborn dirt from clothes. Pre-wash mode increases cycle time, water, energy and detergent consumption.

Main wash

Standard program, the duration of which depends on the type of laundry loaded (type of fabric, children's or sportswear, home textiles).

Rinsing

The rinse mode is activated when there is a need for additional rinsing of the laundry after the main wash (for example, for children's clothes). When, When rinsing is not required, the Rinse Stop mode is activated..

Spin

By activating the “Spin” option, you can independently adjust the number of drum revolutions during spinning for a specific type of fabric.

Delayed start

Depending on the model of the Electrolux washing machine the delayed start time can be from three to twenty-four hours.

Just load the drum, select the start time for washing, and press the “Delay Start” button.

At the right moment, the washing machine will independently begin the operating cycle according to the specified program.

Drain

In a situation where, for some reason, after washing, water remains in the tank, Pressing the "Drain" button will help remove dirty water from the washing machine into the sewer.

The group of additional programs includes a list of those modes, the choice of which is influenced by the type (material of manufacture) of the laundry.

Cotton

Used for washing products made from natural materials (cotton, flax) at temperatures from 30°C to 90°C. The number of revolutions is maximum. The working cycle duration is 145 minutes.

Eco cotton

Used for products made from white, colored (non-fading) fabrics at a temperature of 40°C-60°C. The washing time takes 136 minutes.

Synthetics

Used for washing clothes made from synthetic, mixed matters. Temperature range from 30°C to 60°C. The operating cycle time is 90 minutes.

Thin fabrics

Used for washing very thin, delicate fabrics (acrylic, viscose). The maximum temperature does not exceed 40°C. The duration of a full cycle is 60 minutes.

Wool/Hand wash

Used for gentle washing knitted, woolen products. Maximum temperature 40°C. Minimum number of revolutions. The average program duration is 55 minutes.

Silk

The most gentle washing mode for delicate, light items made from silks. Temperature 30C. The operating cycle time is 30 minutes.

Blanket

A mode in which the water temperature does not exceed 40C and the number of revolutions wash blanket so that its filler does not form a lump.

Jeans

The ideal combination of temperature (up to 60°C) and spin speed helps to thoroughly wash thick denim items. Washing time - 100 minutes.

Curtains

The mode provides two stages: preliminary (without powder) and main wash. Temperature up to 40°C. The operating cycle duration is 100 minutes.

Sport

Used for a light, refreshing wash synthetic sportswear and footwear. Duration: 30 minutes.

5 shirts

A great option for those who want to refresh just a few shirtswithout having to do a long wash. The operating cycle time is only 30 minutes.

Video review of the modes of the Electrolux washing machine:

Test

Diagnostic (test, service) mode is a built-in function of the Electrolux washing machine that checks the functionality of all elements and components in selected modes. During the test mode, the control module will diagnose each element and upon completion will issue a message about the detected faults.

Activating the service mode in a washing machine, the control panel of which is equipped with a program selector goes according to the following algorithm:

1. The selector knob is set to the “Off” position (RESET).
2. Simultaneously press and hold two keys: “Start/Pause” and “Delayed start” (in Fig. 2).
3. Press the “Start” button (in Fig. 1).
4. While holding down the keys (in the photo, point 2), switch the selector knob to the first position. Flashing indicators indicate that the washing machine has turned on the test mode.

Each time the selector is turned one notch to the right, the washing machine will test individual elements and components.

You need to tune in to what The total time of the test mode takes on average 2.5 hours. Having detected a malfunction, the system will display an error code on the display, decoding which you can decide on the possibility of self-repair.

In order to exit the test mode, you need to turn off the washing machine, wait two minutes, turn the household appliance on and off again.

Activating the service mode of a washing machine with a control panel without a selector goes like this:

1. Simultaneously press and hold the buttons located in the lower right corner of the control panel (2 start/pause and delayed start) (pictured item 1)
2. Press the “ON” button (step 2 in the photo).

The “Start/Pause” and “Delayed Start” buttons continue to be held until the indicators on the control panel begin to flash (you will have to wait no more than four seconds). With a certain number of flashes, the Electrolux washing machine signals a problem.

Useful functions of the Electrolux washing machine

In addition to the main and additional modes, the Electrolux washing machine is equipped with many additional functions that ensure the most comfortable, safe and efficient operation of the household appliance. Useful options:

1. Steam System steam function allows you to very quickly refresh your laundry without using washing powder, helps get rid of folds and creases in the fabric.
2. AutoSens system helps save water and electricity. The washing machine automatically determines the optimal washing time, electricity and water consumption based on the weight of dirty laundry loaded into the drum.
3. Aqua Control System will help you forget about washing machine leaks forever. If the tank becomes depressurized during the washing process, a special float sensor will send an alarm signal to the control module. As a result, the washing machine will automatically block the water supply (cut off the inlet hose) and start the drain pump.
4. Time manager function helps to adjust the washing duration. Simply press the appropriate button on the control panel and select the appropriate working cycle duration based on the options offered by the program.
5. Direct Spray mode qualitatively different from conventional modes. During the washing process, things are not simply immersed in water, but are constantly sprayed with a soap solution that enters the drum of the washing machine under pressure. This ensures gentle but very effective cleaning of dirty laundry at the same time.
6. AVTO DOSE function will automatically supply the adjusted amount of detergent into the powder receptacle. The machine weighs the laundry loaded into the drum and determines the exact amount of washing powder.
7. Child lock will help save equipment from constant repairs (child’s pranks can lead to serious damage). To turn on the lock, you need to press and hold for several seconds the two keys “Prewash” and “Easy Ironing”.

How to choose the right one?

Setting the required washing mode is simple: just turn the selector knob to the desired icon. The temperature and number of revolutions are set automatically in accordance with the specified washing program.

If necessary, you can change the temperature mode and spin speed, add an additional rinse, or eliminate this stage of the work cycle by pressing the corresponding buttons on the control panel.

Adviсe

The completion of the wash is signaled not only by the extinguished indicators on the control panel, but also by a sound signal.

The washing duration may vary depending on the washing machine model.. The necessary information can always be found in the operating instructions for household appliances.

In a house where small children live, the washing machine can only be started with the keys on the control panel locked.

If during the washing process there is a need to adjust the selected program, you need to press the “Start/Pause” key, set the selector knob to the correct position and press the “Start/Pause” key again.

Conclusion

Choosing the right mode depending on the type of laundry will help achieve high quality washing.