Useful tips on how to properly use an Electrolux washing machine

Electrolux washing machines are distinguished by their stylish design, functionality, and high build quality.

The device incorporates the latest achievements of developers in terms of electronics, allowing you to control the washing process from the moment you load the laundry until the end of the working cycle.

You can appreciate all the advantages of Electrolux washing machines only if you use the household appliance correctly.

We will tell you further about how to properly use an Electrolux washing machine.

First launch of the Electrolux washing machine

After the washing machine is delivered to your home, unpacked, installed, connected connection to the sewerage system and water supply system comes the most crucial moment - the first start-up.

This recommendation is due to the fact that during the assembly of household appliances, particles of oil and other technical liquids settle on the inner surface of the drum. The first wash without laundry helps clean the drum walls from dirt.

Algorithm of actions:

• check that the washing machine is connected correctly, plug the device into the outlet;
• pour 2 tbsp into the main wash compartment. powder;
• on the control panel select the “cotton” washing mode, water temperature 60°C;
• close the hatch door (tank is empty);
• start the washing process (press the “Start/Pause” button).

During the first wash, it is very important to monitor the operation of the washing machine. If connected incorrectly, there is a high risk of leaks. If such a situation occurs, you must immediately turn off the water supply tap, turn off the household appliance from the network, and eliminate the cause of the leak.

Preparing for washing

Preparation for the washing process proceeds according to the following scheme:

1. The household appliance is connected to the power supply (separately installed, grounded outlet). The Start/Pause or Power button indicator on the control panel should light up.
2. Sort dirty laundry. Everything that requires washing is divided into groups: according to degree of contamination, color and material of manufacture. It is unacceptable to wash colored and white items together (the result is damaged, faded clothes). Hand-embroidered items and hand-knitted items are washed separately.
3. Load the drum of the washing machine. The maximum amount of dirty laundry (weight) that can be loaded into the drum depends on the model of the washing machine (the necessary information can be found in the data sheet of the household appliance).

Mode selection

There are many symbols on the control panel - encrypted meanings of the main washing modes and additional functions of the Electrolux washing machine.

Main modes:

Support programs (selected depending on the type of linen):

Additionally, the display of the control panel of the washing machine displays information about how much time is left until the end of the wash, the number of spin revolutions, and the water temperature in the tank set by the selected program.

Video review of the modes of the Electrolux washing machine:

Starting a household appliance

The process of preparing for washing is completed, the desired mode has been selected, all that remains is to carry out a few more steps before launch washing machine:

1. Select the required temperature mode (varies from 30°C to 95°C). So light, delicate items are washed at a temperature no higher than 30C, cotton items -40°C-60°C. A temperature maximum of 95°C is used for very soiled bed linen or bath items.
2. Set the required number of spin revolutions. As a rule, when selecting a washing mode, the program automatically sets the desired spin parameter, but if necessary, it can be changed using the corresponding button on the control panel.
3. Pour washing powder into the detergent dispenser compartment.

Information about the amount of washing powder required for one wash can be found on the packaging of the detergent. It is not necessary to exceed the recommended norms. Otherwise, saving powder will reduce the quality of washing, and increasing the rate will lead to excessive foam formation, which can damage the Electrolux washing machine.

After all the preparatory measures have been completed, you can start washing. To do this, press the “Start/Pause” button.The indicator on the control panel will stop flashing, and the machine will start the initial stage of washing - drawing water into the tank.

What to do after?

Once the washing is finished, you must:

• unload washed laundry from the drum of the washing machine;
• Wipe the rubber cuff from moisture with a clean cloth (additionally check the seal for stuck small items of clothing);
• slightly open the detergent dispenser (if there is any undissolved powder left in the tray, it must be removed);
• open the hatch door slightly for ventilation (ventilation of the inner surface of the drum prevents the formation of an unpleasant musty odor).

Do not try to open the hatch door immediately after the sound signal for the end of the wash. The UBL keeps the door closed for another 2-3 minutes. Sudden movements or tugging can break the lock.

How to care for equipment?

Regular, proper care will help extend the trouble-free operation of your Electrolux washing machine.

So The drum and powder compartment are wiped with a soft sponge at least once a week. using baking soda paste (the dry powder is diluted with warm water until a thick paste forms). Such actions help clean surfaces from limescale and other impurities from hard tap water.

Don't forget about the rubber cuff around the hatch. It is in its folds that the largest amount of dirt collects, which can be cleaned with a soft toothbrush and baking soda paste.

The rubber seal cannot be cleaned with chlorine-containing compounds. (for example Whiteness). Otherwise, the cuff will very quickly lose its elasticity and become covered with cracks.

The drain filter and water inlet filter require special attention.To avoid problems with draining waste fluid, it is necessary to clean the drain filter once every ten days. You can find it in the lower part of the hull behind a small hatch.

Covered with a layer of impurity particles from tap water, the water inlet filter blocks the process of water entering the washing machine. How to clean it? To do this, on the back panel of the washing machine body, unscrew the fastening nut of the inlet hose, from which, using a flat screwdriver, carefully remove a small metal mesh - the inlet filter. The mesh is cleaned under water pressure with a toothbrush., after which they are installed in their original place.

Once a week, wipe the body of the washing machine with a soft cloth or sponge moistened with soapy water.

Errors (on screen) and what to do about them?

The self-diagnosis system, which is equipped with most models of Electrolux washing machines, helps to quickly determine the cause of the problem and restore the normal functioning of household appliances. The error code displayed on the information display on the control panel will tell you what exactly caused the malfunction:

1. Error E01 (EA1), E02 (EA2), E04 (EA4), EA5. Problem: The washing machine does not spin the drum. What to do: check the drive belt, test the drum self-positioning device.
2. Error E03. Problem: The washing machine does not heat the water. What to do: test the heating element relay and heating element with a multimeter (replace if necessary).
3. Error EA6 (typical for top-loading washing machines). Problem: The drum does not rotate.What to do: check the drive belt, restart the wash.
4. Error E10 (in some E11 models). Problem: lack of water supply to the tank. What to do: check the water pressure in the tap, inspect the hose for breaks and kinks, test the fill valve.
5. Error E13. Problem: leaks in the system. What to do: disconnect the washing machine from the power supply, call a specialist for detailed diagnostics and repairs.
6. Error E20, E21 (C2), E23, E24. Problem: no water drainage. What to do: check the drain hose and the drain pump impeller for blockages, test the drain pump.
7. Error E31, E32, E33, E34, E35, E38. Problem: the tank is not completely filled with water or the water level exceeds the permissible limit. What to do: test (replace if necessary) the pressure switch, clean clogged areas of the sensor.
8. Error E40,E41,E42,E43,E44,E45. Problem: The machine does not start the washing process. What to do: check the tightness of the hatch closure, the integrity of the rubber cuff, test the functionality of the UBL, restart the wash.
9. Error E50, E51, E53, E54, E55. Problem: The washing machine does not spin the drum. What to do: restart the washing machine, check the functionality of the triac, motor (brushes), tachometer, Hall sensor.
10. Error E52, E56, E59. Problem: the tachometer is malfunctioning. What to do: restart the washing machine, ring the controller circuit, test the tachometer (replace if necessary).
11. Error E57, E58. Problem: the washing machine does not emit any rotation signals, the washing process is blocked. What to do: check the voltage in the network (most often this problem is associated with very high voltage in the network), test the control module.
12. Error E61, E62, E66, E68, E69, E3A, E71, E74. Problem: the machine does not heat the water or the temperature of the heated water exceeds the value set by the program. What to do: check the contacts of the heating element and temperature sensor (replace faulty elements).
13. Error E90, E91, E93, E94, E95, E96, E97. Problem: The washing machine does not respond to specified commands from the control panel. What to do: test the control unit elements, clean or replace the electronic boards if necessary.
14. Error EH2. Problem: The mains voltage is too high. What to do: check the power supply.
15. Error EH3. Problem: The mains voltage is too low. What to do: check the power supply. If necessary, install a voltage stabilizer.

Adviсe

By installing the washing machine on a rubber mat, you can significantly reduce the noise and vibration of the body during the washing process.

At the end of the full washing cycle, the household appliance must be unplugged from the outlet. (sudden surges in network voltage can lead to serious repairs to the control module).

Do not pack the washing machine drum tightly. Otherwise, overloaded household appliances will break down very quickly.

Clothing with rivets and other metal fittings must be turned inside out before loading into the drum. to the wrong side. This will help protect the inside of the tank from scratches and dents, and your clothes from being snagged or torn.

A special measuring spoon will help you accurately measure the required amount of dry (or liquid) washing powder.If a situation arises that requires adjustment of the specified parameters (for example, it is necessary to change the water temperature), the “Start/Pause” button is pressed again. The green indicator starts flashing and the running process is suspended.

Conclusion

Compliance with all operating rules for Electrolux washing machines will allow you to fully appreciate all the positive characteristics and capabilities of the household appliance.