What does error E10 mean on an Electrolux washing machine, how can I fix it?
The washing process was started, but suddenly the Electrolux washing machine stopped, and strange “E10” symbols appeared on the control panel display.
Detailed information about what the E10 signal is, what caused the malfunction and whether it can be fixed with your own hands will help restore the functionality of the washing machine as quickly as possible.
Content
What does the code that the Electrolux washing machine produces mean?
Problems with water entering the tank (the process is blocked or water enters the tank very slowly) are displayed on the display of the Electrolux washing machine with error E 10 (alternatively, code C1 may be displayed).
There are several options for deciphering signals about a malfunction.. For Electrolux washing machines with an EWM 1000 control module, the error code is read by two indicators, one of which is located near the “Start/Pause” button, and the second near the “Wash End” button.
The indicators flash alternately. The number of blinks of the first indicator corresponds to the number of the error code, the number of blinks of the second indicator corresponds to the second number of the code.
Models of Electrolux washing machines with an EWM 2000 control module are distinguished by a more complex scheme for recognizing error codes. To decrypt, use eight light bulbs located on the right side of the control panel. The four upper lights are responsible for the first digit of the code, the four lower lights for the second digit of the washing machine error code.
The serial number of the indicator is determined from top to bottom. In case of error E10, only the first of the top four indicators is lit.
You can find out exactly which control module is installed on a specific Electrolux washing machine on a plate attached to the body of the household appliance or by markings that can be seen on the back of the control panel.
Why does it appear and what to do?
The reasons that can trigger the E10 error on an Electrolux washing machine are very varied: from a simple lack of water in the tap to serious damage to the control module.
Lack (or very weak) pressure in the water supply system of the house
The first thing to check when error E10 occurs is is there water in the house's plumbing system?. If there is no water (or the pressure is very weak), the Electrolux washing machine must be turned off. Restarting the wash cycle is possible only when the water supply is restored.
Additionally, check the stop valve on the water pipe. Complete or partial blocking of the valve leads to the appearance of error E10 on the control panel display of the washing machine.
Problems with the inlet hose
If everything is fine with the water pressure in the tap, perhaps the cause of error E10 lies in the inlet hose.Compression of the corrugation connecting the washing machine to the shut-off valve of the water pipe prevents the free flow of water, to which the washing machine responds with error code E10.
Fill valve filter clogged
There is a special mesh between the fill valve and the inlet hose., the purpose of which is to filter sand and other impurities before supplying tap water to the washing machine.
Checking the fill valve filter is easy. Simply unscrew the inlet hose, remove the filter and rinse it thoroughly under running water.
If the mesh is covered with limescale, citric acid will help clean it.. The filter is soaked in a solution of citric acid (1 teaspoon of dry powder per glass of warm water is enough) for half an hour, after which it is washed under the tap.
Spontaneous drainage
Incorrect installation of the washing machine, as well as errors in connecting to the sewer, lead to water flowing out of the tank by gravity.
The end of the drain hose must be located at least 50 cm from the floor. There should always be some air in the hose, so do not lower it very deep into the sewer.
The water drainage has been checked, the pressure in the tap is normal, there are no problems with the inlet hose and filter, but still error E10 is displayed on the display of the Electrolux washing machine.
In this case, the cause of the problem will have to be look in such elements of the internal structure as:
- pressure switch,
- water supply valve,
- Control block.
Before proceeding with the diagnosis and necessary repairs of the above elements, the washing machine must be disconnected from the electricity supply, shut off the water supply, and disconnected from the sewerage system.
The pressure switch has failed
A clogged or broken water level sensor in the tank leads to the fact that the control module, not receiving the necessary information about filling the drum with water, blocks this process, which is indicated by the corresponding error E10.
You can check the operation of the pressure switch as follows:
- Having unscrewed the fasteners on the back wall, remove the cover of the washing machine, opening access to the water level sensor in the tank;
- disconnect the pressure hose from the sensor;
- We fix a tube of suitable diameter to the pressure switch fitting, after which there is no need to blow sharply several times.
If you do not hear characteristic clicks, the sensor is faulty and requires replacement.
Before replacing, the pressure switch is additionally tested with a multimeter. The probes are applied to the sensor contacts; if the readings on the device monitor have not changed, the pressure switch has failed and must be replaced.
The water supply valve is broken
Inside the intake valve body there is a thin diaphragm and two electromagnetic coils. They are the ones who transmit the signal from the control module to the membrane about the start of water supply to the washing machine tank.
You can check the operation of the intake valve as follows:
- Remove the hoses and wiring from the valve.
- Unscrew the fixing bolts and remove the part from the washing machine body.
- Connect the valve to the tap with a tube and open the water.
A working valve does not allow water to pass through, otherwise the part requires replacement.
Control unit failure
Most often, a problem with the control unit can be guessed by the following symptoms: the tank is filled with water, but the washing machine periodically stops, giving error E10.
You can independently determine a possible breakdown of the control unit only visually:
- pull out the detergent dispenser, and in the opened niche, unscrew the mounting bolts holding the control panel;
- Unclamping the plastic latches with a screwdriver, remove the panel from the washing machine body;
- Having photographed the connection diagram of all elements, we free the control unit from the wiring and remove it from the washing machine body.
Having carefully examined the control unit, we determine the location of the burnt element on the board. More serious diagnostics and repairs of the control unit using special tools must be entrusted to service center professionals.
Call the master
For those who understand little about the workings of a washing machine, diagnosing the E10 error code can be a real problem. Service center technicians will help resolve the issue of restoring the functionality of household appliances.
In the instructions for the washing machine (on the last page) or On the Internet you can find contacts of the necessary specialists. When making a request to call a technician, you need to specify the model of the washing machine, year of manufacture, and describe the problem that has arisen in as much detail as possible. After the diagnostics have been carried out, the technician will be able to determine the full cost of repairing the washing machine.
Depending on the identified cause, eliminating the E10 error will cost from 1,700 to 2,500 rubles.
How to prevent a malfunction in the future?
Prevent the reappearance of error E10 on the display of the Electrolux washing machine The following recommendations will help:
- Before starting, carefully inspect the washing machine for kinks in the water inlet hoses.
- Carry out preventative cleaning of the fill valve filter regularly.
- Use detergents recommended by the manufacturer, but do not exceed the specified dosage (excessive foam formation may block the process of water entering the tank).
- In case of repair, use only original, high-quality parts.
Strict adherence to all manufacturer’s recommendations for operating an Electrolux washing machine minimizes the likelihood of error E10 occurring.
Adviсe
Before starting repair work you must make sure that the device is disconnected from the electrical network, water supply and sewerage.
Provided that all components and mechanisms are in good working order, a reboot will help quickly resolve the E10 error in the Electrolux washing machine.
The household appliance must be unplugged, wait ten minutes, and then start the washing process again.
Conclusion
Modern Electrolux washing machines, equipped with a self-diagnosis function, simplify the process of identifying problems as much as possible by signaling with an error code. Understanding what is encrypted under alphabetic or light signals greatly speeds up the process of restoring the washing machine’s functionality.
