Instructions for replacing the cuff of a Bosch washing machine with your own hands

As a result of prolonged use of the Bosch washing machine, the use of aggressive household chemicals, and careless handling of the household appliance, the rubber seal around the hatch door (cuff) begins to deform and loses strength and elasticity.

As a result, water begins to leak through the damaged cuff. The problem cannot be ignored. Penetration of moisture inside the washing machine can result in a short circuit, which entails lengthy, expensive repairs of household appliances.

We will talk about replacing the cuff of a Bosch washing machine further.

When does the sunroof seal need to be replaced?

Water leaks from under the hatch door - a signal that the rubber seal is damaged and requires replacement.

Mechanical damage (punctures, tears), deformation and other visible signs of wear, traces of mold and mildew confirm the fact that the cuff needs to be changed.

Preparation

Provided proper preparation, replacing the rubber seal of the hatch door with your own hands will not be difficult.

The first thing you need to do is assemble the tool:

• keys,
• screwdrivers (two flat, one Phillips),
• marker.

It’s also worth taking care of a new cuff for your Bosch washing machine in advance.

After the necessary tools are collected:

• the washing machine is disconnected from the sewer and water supply,
• unplug the power cord from the socket,
• Place the household appliance on a flat, stable surface, away from walls and furniture.

How to change?

Replacing the rubber seal on the hatch door of a Bosch washing machine consists of three main stages: dismantling the old cuff, installing a new seal, and reassembling the washing machine.

How to remove?

To quickly get to the desired element - a worn cuff, it is necessary to carry out a number of sequential actions:

1. Using a Phillips screwdriver, unscrew the fasteners holding the top panel of the washing machine.
2. Gently pushing forward, remove the cover from the washer body.
3. Remove the detergent dispenser. To do this, you need to press a special latch inside the tray, after which the powder receptacle is very easily pulled out of the grooves.
4. In the opened niche of the detergent dispenser, unscrew the fasteners holding the control panel. Carefully, trying not to damage the wiring contacts, remove the panel from the washing machine body.
5. Using a flathead screwdriver, press out the latches holding the decorative panel located at the bottom of the washing machine.
6. Open the hatch door of the washing machine. Feeling the edge of the rubber seal with your fingers, find the retaining clamp (thin metal ring).
7. Using a flat-head screwdriver, carefully pry the clamp off the cuff.
8. Place the rubber seal into the washing machine drum.
9. Unscrew the fasteners holding the hatch lock device (located on the right side of the loading hatch), disconnect the UBL wiring.
10. Unscrew the fasteners around the perimeter of the front panel and remove it from the washing machine body.
11. Using a flat screwdriver, carefully pry off the second clamp (metal ring) together with the rubber seal.

If there are no additional marks, before dismantling the old cuff, the point of contact of the tank with the rubber seal must be marked with a marker. This will help avoid mistakes when installing a new cuff.

Installation of a new part

Installing a new rubber hatch door seal yourself is not difficult., subject to a clear sequence of actions:

• carefully inspect the new part, turn the rubber with the drain holes down;
• lubricate the grooves of the cuff and the seat with a soap solution (sliding simplifies the process of tightening the rubber seal);
• placing the cuff in a special recess located along the edge, evenly stretch the rubber seal to the right and left sides, pulling it onto the seat;
• secure the new cuff with a metal clamp.

It is necessary to ensure that the drain holes are located clearly in the center, otherwise problems with draining water may occur.

Reassembly

Bosch washing machine reassembly process happens in the following order:

1. The UBL contacts are connected.
2. The front panel is attached to its original place.
3. The hatch locking device is secured with fasteners.
4. The rubber cuff is fixed with a metal clamp.
5. The lower decorative panel returns to its original place.
6. The control panel is attached, the lid is mounted, and the detergent dispenser is inserted.

The reassembly process is completed, the washing machine is connected to the communications, after which a test wash is started.

How to change cuffs - in the video:

Price of a new part for a Bosch washing machine

Wear and mechanical damage to the rubber seal of the hatch door is a minor problem, which can be easily eliminated by replacing the worn element with a new cuff.

In a situation where the purchase of a new seal is carried out in an online store, before placing an order the manager must be informed of the model, serial number and year of manufacture Bosch washing machine.

Before purchasing, it would be a good idea to take an interest in the seller’s reviews and ratings! Depending on the model of the washing machine, prices for cuffs vary from 1200 rubles. up to 6500 rub.

Call the master

When there is no time or desire to carry out routine repairs of the washing machine, Service center specialists come to the rescue.

They will quickly diagnose the problem that has arisen and replace the worn cuff efficiently and with a guarantee.

Finding the necessary contacts is not difficult. As an option, you can use word of mouth (based on reviews from friends and neighbors, find the right specialist). The second way is to find out the contacts of the service center using search engines on the Internet.

The cost of replacing the cuff in a Bosch washing machine starts from 2,500 rubles. The cost of the service includes:

• diagnostics,
• dismantling a worn part,
• installation of a new cuff,
• Reassembly of the washing machine.

A new rubber seal is paid separately.

Unfortunately, no one is immune from fraudulent actions of unscrupulous craftsmen. One well-known rule will help you save money: “Payment is made only upon completion of the repair!”

How to avoid problems in the future?

Maintain the elasticity and integrity of the rubber seal of the hatch door A few simple tips will help:

• at the end of washing, the cuff must be wiped dry with a soft cloth, the hatch door is always left ajar (moisture promotes the development of mold and mildew, which destroy the rubber seal);
• When loading the washing machine, it is important to always follow the amount of washing powder indicated by the manufacturer on the packaging (excessive use of aggressive chemicals destroys rubber);
• When filling the drum, you should carefully monitor the amount of dirty laundry (constant overload destroys the bearing unit of the drum, which leads to rapid wear and deformation of the rubber cuff);
• Before washing, the pockets on the clothes are carefully inspected (even a very small but sharp object can cause the rubber seal to rupture).

Conclusion

Accuracy, attentiveness, and adherence to a clear algorithm for repair work will help you replace the cuff of a Bosch washing machine as quickly and efficiently as possible.