Several ways to unlock a Bosch washing machine

Locking the washing machine is a convenient function that is installed on all modern appliances.

It prevents accidental key presses during program execution and protects the machine from children's games.

Turning on the lock is not difficult, but removing it can sometimes be problematic. Read the article on how to unlock a Bosch washing machine without damaging it.

Why might a Bosch washing machine be blocked?

Bosch washing machine may be blocked for the following reasons:

1. This feature was enabled by the user himself. It allows you to protect the device from accidental key presses while executing the selected program. Sometimes opening the hatch can be dangerous, for example, during washing at 90 degrees. The locking of Bosch washing machines is activated by simultaneously pressing the “Spin speed” and “Time to end” buttons. They must be held for 3 seconds. After this, the “key” icon should appear on the display.
2. The device detected an error in the operation of one of the nodes, or the program crashed. In this case, the washing machine is blocked, and a code appears, decoding which will allow you to troubleshoot.
3. There was a one-time failure in the operation of the control board. Most often this happens during voltage surges in the network.
4. The hatch locking device is broken. A signal about its incorrect operation is sent to the control board, which causes it to block the door.

After identifying the cause of the blocking, you can eliminate it using one of the available methods.

How to remove the child lock?

To remove the hatch lock, which was set to prevent accidental opening, you need to do the following:

• press the button that corresponds to the washing program selected at the initial stage;
• simultaneously press and hold the lock key;
• wait for the click that indicates the door opens;
• open the hatch.

This is a classic way to remove a child lock that you installed yourself.

Unlocking after an error code

Sometimes the blockage is caused by a malfunction of the washing machine. In this case, the screen will appear error code.

Another way to unlock the hatch after the error code appears:

• turn on the device;
• press the “Start” button and at the same time turn the programmer 2 steps to the left;
• release the "Start" key;
• the machine should unlock.

You can try to reset the error code in the following way:

1. Turn the programmer to the “Spin” position.
2. While holding the speed button, turn the controller to the “Drain” position.
3. Release the "Revolution" button.
4. Turn on the quick wash program and after 2 seconds turn off all programs by turning the controller to the “Off” position.

It also happens that the error code and blocking cannot be eliminated using such simple methods. If there is a complex breakdown, you will not be able to handle it on your own; you will need the help of a professional.

How to disable the door lock?

To unlock the door of a washing machine that was closed due to a program malfunction, proceed as follows:

• disconnect the machine from the network;
• leave it turned off for 10 minutes;
• reconnect the device;
• they try to open the door.

In most cases, this method helps to cope with the problem. Another option is to run the wash cycle again. The device will then unlock the door to lock it again. At this moment you need to have time to open it. Details - in this article.

Helpful information

Tips for using the lock feature on Bosch washing machines:

1. If there are small children or large animals in the house, you need to use the key lock function every time you wash.
2. Depending on the model, the set of buttons for locking the hatch may differ. Please refer to the User's Guide for exact information.
3. If you are unable to independently determine the reason for the hatch blocking, you should not try to open it using any mechanical object or by applying force. This will cause damage to the UBL or handle. As a result, expensive repairs will be required.
4. If there is water in the tank, it means that the device has not completed the cycle. You should not try to open it at this moment.

Conclusion

Locking the washing machine is a useful option that was introduced by the developers to prevent accidental opening of the device during operation. If the equipment functions properly, then unlocking it will not be difficult. In the event of a breakdown, you will have to resort to special measures, or call a specialist.