Simple instructions on how to remove the top cover of a Bosch washing machine

The main components are located under the top cover of the Bosch washing machine. Without dismantling it, it is impossible to get to almost any detail.

For people who have never disassembled complex household appliances, this task may seem impossible.

Read the article on how to remove the top cover from a Bosch washing machine without damaging it or making mistakes.

Preparation

Regardless of the orientation of the drum in the Bosch washing machine, the preparatory measures will be the same for both vertically and horizontally loaded appliances.

Basic steps:

• prepare the tool - to remove the top cover you only need a screwdriver;
• make sure that there is no laundry in the drum and the water is drained;
• disconnect the device from the power supply by unplugging the cord from the outlet;
• turn off the water supply tap;
• Move the machine away from the wall to have access not only to the front, but also to the rear panel of the device.

Procedure

The sequence of actions will differ depending on whether the washing machine has a front or vertical load. You need to familiarize yourself with all the nuances before starting work.

From a Bosch top-loading washing machine

The instrument panel of Bosch washing machines is located on the top cover, so before dismantling it, you need to twist the controller.

Procedure:

1. Provide access to the device. To do this, it is better to move it away from the wall.
2. Using a Phillips screwdriver, unscrew the screws that secure the control panel.
3. Remove it by lifting it up and pushing it forward. You cannot make sudden movements. There are many wires under the control unit, damage to which will lead to disruption of the washing machine.
4. After removing the module, you can visualize the screws that secure the cover. They are twisted.
5. Remove the screws to the side and remove the cover.

In general, the process is not difficult. The main thing is not to use excessive force. If the lid is difficult to move, it must be removed with a swing. Although the plastic of Bosch washing machines is durable, even it can break if handled carelessly.

From the front

The process of removing the cover from a Bosch washing machine consists of the following steps:

1. Rotate the device so that it is convenient to tighten the bolts located on the back wall.
2. Find the screws and use a Phillips screwdriver to unscrew them. The top cover of the Bosch washing machine is fixed with two small bolts. Set them aside so as not to lose them.
3. Stand behind the machine, facing it.
4. Lift the cover and pull it towards you. You need to act slowly, continuing to move until it is in your hands.

Sometimes the lid fits very tightly to the body, so lifting it is problematic. In this case, you should stand in front of the washing machine from the part where the hatch is located, rest your hands on the lid and push it forward. This will help set the housing part in motion.

How to install it back?

When all the tasks for which the cover was removed have been solved, it must be returned to its original place. This is easy to do, just follow all the steps in reverse order..

To install the lid on a front-loading washing machine, place it on the panel and slide it forward. When it is completely in place, the part is fixed with bolts. All that remains is to return the machine to its previous position and connect it to the communications.

If you need to install a lid on a top-loading machine, then it is put on the body so that it covers the side walls. When the holes for the screws match, they are screwed in. Then they mount the removed control panel, making sure that the wires coming from it are not pinched.

Common Mistakes

When removing the lid of a Bosch washing machine mistakes are possible, especially if a person has no experience in carrying out such work, among them:

1. The bolts securing the cover are not unscrewed. If you do not remove them, the part may break.
2. When trying to remove the top panel, considerable force is applied. This should not be done, as it may damage the plastic.
3. A knife or other sharp objects are used to lift the part. This is fraught with the appearance of scratches and chips.
4. Loss of original screws. After twisting, they need to be placed in a separate box. It is not always possible to select screws that are suitable in size and thread.
5. Careless handling of parts. The edges of the lid can be sharp and can easily cause injury.

Conclusion

The Bosch washing machine has a complex structure, but removing the top cover will not be difficult if you follow the instructions. The main thing is not to rush and not to put in significant effort. Then the disassembly and repair of the machine will take place without additional breakdowns and difficulties.