Why does the Atlant washing machine display error F5, what should I do?

When an error occurs, Atlant washing machines notify the user about the problem by issuing a specific code on the device display.

One possible option could be F5. Sometimes it is possible to fix the problem even on your own, but in case of serious breakdowns it would be better to call a specialist.

What the error code F5 of the Atlant washing machine means and how to fix it, we will tell you further.

Code F5 on the display - what does it mean?

Issuing code F5 on the display of the Atlant washing machine usually accompanies a situation in which water is not drawn into the apparatus or the process is very slow.

Also, with this failure code, a continuous process of drawing and draining water is possible. The “F5” encoding itself indicates an error in water intake.

What kind of light bulbs are lit?, depends on the car model:

• in OptimaControl, the analogue of F5 is the glow of the “Wash” and “Water Stop” diodes;
• in SoftControl it is both “Rinse” and “Spin”.

When F5 appears, the washing process does not progress and the machine freezes. The solution to the problem is to find and eliminate the cause of the failure.

Causes and solutions to the problem

F5 is not always a signal of a complex breakdown of Atlant equipment. In some cases, the problem can be solved fairly quickly, even in the absence of great knowledge regarding the design of the equipment.

Incorrect installation of the device

This situation often occurs with recently installed Atlant washing machines or with those moved to a new location. Usually the problem is related to the location of the drain hose.

According to the rules, when it comes out of the washer body, it must be raised above the level of the tank. This is necessary to prevent self-draining.

When Atlanta is installed correctly, water pours out of the machine only when the drain pump is running. If violations have been made and the hose is simply lying on the floor, water will flow out of the tank spontaneously into the sewer.

As a result, the Atlant machine does not have a sufficient level of liquid, and the device displays error F5. The solution to the problem is to install the Atlant washing machine in accordance with the manufacturer’s requirements.

Lack of water in the water supply

If there is no water in the house, the Atlant washing machine cannot draw water, which it informs the user about using F5. No repairs are required - after the water supply is supplied to the water supply system, the functionality of the washing machine will be restored.

Water supply tap is closed

F5 may also appear when the tap shutting off the water to the washing machine was closed Atlant. If it is located in a place that is inconvenient for access, this circumstance may not be immediately noticed. The solution to the problem is to switch the tap to the “ON” position.

Broken tap that shuts off the water

If the water supply tap to Atlant is damaged - stuck or loose, it may not open the water supply to the washing machine completely.The solution to the problem is to replace the tap.

The inlet hose is pinched

If the Atlanta inlet hose is tightly pinched, for example, by furniture, it may not allow water to flow to the washing machine. Or skip it, but very slowly, which is not enough for normal operation of the device.

Poor water pressure

If there is insufficient water pressure in the water supply, a fault code may be issued F5. The problem manifests itself by taking a very long time to draw water and then issuing a failure code.

This situation can arise not only when the water pressure in the water supply is weak, but also when the tap is not fully open, which shuts off the water supply to the Atlant machine.

Once normal water pressure is restored, the problem will be solved.

Impaired patency of the mesh filter

When the mesh at the inlet of the inlet hose is clogged with debris and scale into the Atlant washing machine, the passage of water may be difficult or completely stopped.

Located in front of the fill valve, this part serves to trap foreign matter from the tap water to protect the washing machine.

To clean the part you need to:

1. Disconnect the Atlant washing machine from communications.
2. Unscrew the inlet hose nut.
3. Carefully remove the mesh.
4. Rinse the mesh under water.
5. Install the element in its original place.
6. Screw on the water inlet hose.
7. Connect communications to the device.

If the mesh is damaged, it is better to replace it.

Random crash

A sudden voltage surge or freezing of the control module can lead to failures and issuing F5.This situation can be eliminated by rebooting the equipment - to do this, just turn off the power to the machine for 20-30 minutes, and then restart the work. If the situation with water collection has not improved, you need to move on to further diagnostics.

Flood valve

According to statistics, a breakdown of the fill valve accounts for the vast majority of cases of problems with filling water into the Atlant washing machine.

This unit consists of several parts and is responsible for supplying water. It consists of a housing, a membrane and an electromagnetic coil. The most common failure is coil burnout.

Depending on the Atlant model, there may be two or one valves. In older washing machines, most often there is only one, and it regulates the water supply during both washing and rinsing. In more modern devices, the valve has 2 sections, one of which is used when drawing water for washing, the other during the rinsing stage.

Depending on which section is out of order, water may not be filled either at the beginning of work or already during rinsing. The solution to the problem is to replace the valve with a new one.

Failure of the pressure switch

A failure is manifested by either a lack of water intake or drainage after intake. The water level sensor determines its level in the tank. It is possible to check the condition of the unit by partially disassembling the Atlant washing machine. Breakage can be caused by a clogged chamber and a hose coming off.

Control block

If individual elements of the Atlanta control module burn out, work may stop with F5 being issued.As a rule, such a breakdown can be repaired. To do this, the control module is removed. If the board is badly burned, it may need to be completely replaced.

Broken wiring

Damage to the integrity of the wiring and loose terminals can lead to the fact that signals between the nodes and the Atlanta control module will not pass. To restore the operation of the washing machine the housing is partially disassembled and the condition of the wires is checked. If damage is found, they are replaced or twisted.

Inlet hose leaking

One of the rare but possible situations is a leak from the Atlanta inlet hose. If there is such a defect, the water supplied to the machine simply does not reach it. If water gets into the aquastop pan, the protection is triggered and the fill valve is closed. The solution to the problem is to replace the damaged hose.

Call the master

If you detect a fault code on the display of your Atlant washing machine, you can try to solve the problem on your own and call a technician.

Companies that provide repair services have a wide presence on the Internet.. In advance, you can read reviews about the work of the masters, find contact numbers and study the price list.

Firms that value their reputation and are committed to working for a long time do quality work. The cost of repairs depends on the breakdown and the pricing policy of the company.

Average prices for repairs in Moscow Atlant are:

• replacement of the inlet hose - from 900 rubles;
• wiring repair - from 1600 rubles;
• repair of the control unit - from 2100 rubles;
• replacement of the pressure switch – from 1,700 rubles;
• replacement of the fill valve - from 1600 rubles.

The cost of consumables and new parts is paid by the customer separately.

Prevention

In order to avoid the problem of water pouring into the Atlant washing machine, The following preventive measures should be taken into account:

• install a reliable, high-quality water supply tap to the washing machine;
• if tap water is very dirty, it is worth using additional filters for your house or apartment;
• After finishing the washing machine program, it is advisable to turn off the water supply tap to the device, this will allow it not to be constantly under pressure.

Recommendations

When F5 appears on the Atlanta display The following expert advice may help:

1. The search for the cause of the failure should begin with those components that do not require disassembling the body of the washing machine.
2. If hoses or pipes are leaky, they should not be repaired, but replaced.
3. Simple repairs (cleaning the mesh filter) can be carried out even by a non-professional. The main thing is accuracy, and after finishing the work, carefully carry out the reverse installation.
4. Cars that are under warranty should not be repaired on your own - to have them repaired, you need to contact a service center.
5. Even simple repair work should be carried out with communications disconnected.

Conclusion

Error F5 in Atlant washing machines is not a rare situation, and such a problem is not always solved by complex repairs. Some faulty situations can be fixed on your own, and even without the use of tools, but it would be better to entrust the repair of complex breakdowns to a professional technician.