Current question: is it possible to pour powder directly into the drum of an automatic washing machine?

foto26191-1Automatic machine washing involves placing items in the drum, making settings, and adding detergent.

The safety of the working components of the device and the quality of the washing process itself depend on how correctly this is done.

Is it possible to pour powder directly into the drum of an automatic washing machine, how can this be dangerous? Let's try to figure it out.

Is it permissible?

foto26191-2When the operating cycle starts, the washing machine begins to supply water under pressure into the cuvette. Then it goes into the drum.

Regardless of the presence or absence of detergent in the compartment, the operating procedure of the automatic machine does not change. The functionality of the device itself is not radically affected by where the powder is placed..

If the dry mixture was poured into the cuvette before washing, then the pressure of water not only washes it off into the laundry, but also dissolves all particles. Otherwise, when the powder was poured directly into the drum, the incoming water begins to dissolve it only as it accumulates.

At the same time, the danger remains that previously undissolved granules can give an unexpected reaction on things - leaving stains.

An even greater danger is the addition of stain removers and bleaches into the drum.. These are aggressive agents that can not only leave stains on the laundry, but even ruin the fabric.

Manufacturers of household chemicals do not recommend pouring the product directly into the drum of a washing machine.

In what cases is this the norm?

In some cases, placing the product directly on clothing is not only acceptable, but also the only possible option. These are exceptions to the general rule.

Capsules

Capsules in the form of pads are produced by many manufacturers of household chemicals. This product is intended for automatic processing only.

foto26191-3Application of capsules:

  1. Place 1 capsule per standard load into an empty drum.
  2. Place laundry on top.
  3. Set the processing mode.
  4. Start the wash cycle.

Any other method of using capsules is unacceptable.

Soap powder

If the soap powder designed for automatic processing is coarse-grained, it is better not to pour it into the cuvette. Upon contact with water, such a composition will become viscous, and may not be completely washed out and not reach the laundry.

For better dissolution of soap-based mixtures, it is advisable to first dilute them with water and put them in the drum in this form.

Gel

Powder in liquid form it is permissible not only to pour into the cuvette, but also to place directly into the drum. Since the product is homogeneous, without grains or granules, the option of pouring it directly onto clothing is acceptable.

If the gel is poured directly into the drum, then it is advisable to start the wash cycle immediately, without delay. This will prevent the undiluted product from contacting the laundry for a long time.

He will tell you where to put the washing gel in the washing machine. this article.

Other options

If necessary, it is also possible to place mild, plant-based detergents into the drum. Also it is permissible to place drugs sold in compressed form.

How to do the right thing?

The traditional use of powder in a washing machine is to pour it into a drawer specially designed for this purpose.When the program starts, water is automatically supplied, which washes away and dissolves all particles. This avoids contact of dry powder grains with laundry.

In modern automatic machines, the cuvette has three compartments:

  • for a product intended for pre-washing;
  • for a preparation intended for the main wash;
  • for air conditioner.

If you use regular powder, then the procedure is as follows:

  1. foto26191-4Place laundry in an empty washing machine.
  2. Measure out the dose of mixture required for the wash cycle. When using the gel, it is poured into the cuvette compartment, which is intended for powder.
  3. Pour the drug into the appropriate compartment of the cuvette.
  4. Push the compartment.
  5. Select washing mode.
  6. Press start.

The product is washed off completely in cases where:

  • the holes in the water supply tubes are not clogged and function normally;
  • the amount of powder placed in the cuvette corresponds to the general recommendations for the drug (not exceeded);
  • The detergent is suitable for this application.
If water leaks from the cuvette, this unit needs to determine the cause of the problem and repair it.

Recommendations

Expert advice will help make washing at home easier and avoid common mistakes:

  1. Even with proper use of the compartment on the body of the washing machine, designed for powder, it becomes dirty during operation. There are grains left on the plastic that are not washed into the drum and dust. As a result, the cuvette becomes dirty. The solution to the problem is regular cleaning.
  2. If the washing machine is to be built into the set, it is necessary to provide for the possibility of free extension of the cuvette for pouring powder.
  3. If for some reason it is impossible to pour the detergent into the cuvette, you can place the pre-diluted powder in the drum. But the risk of fabric damage is still present.
  4. The required amount of product should take into account the hardness of the supplied water and the degree of contamination of the products.
  5. If the need to pour detergent into the drum is caused by a broken drawer, you must try to repair the machine as soon as possible.

You will find a lot of useful and important information about washing powder Here.

Conclusion

Whether it is possible to pour washing powder into the drum depends on the form of the detergent and the characteristics of its use. In some cases, this approach is not only acceptable, but even recommended.

Discussions

How to remove odor

Scratches

Yellow spots