Advice from experienced car owners on how to ensure that chewing gum is removed from a car seat
Chewing gum stuck to a car seat is a nuisance that can happen to anyone. However, don't be upset.
There are several simple ways to fix the problem. It is enough to choose the most suitable one depending on the conditions and upholstery material.
In this article we will tell you how to remove chewing gum from a car seat without damaging the upholstery.
Content
How to remove chewing gum from car upholstery?
Existing methods for removing chewing gum from a car seat are available to everyone. Initially, it is recommended to choose the most gentle ones, and only if there is no result, use special means. Let's consider the best options.
Freezing
Used primarily to remove small-sized contamination. Advantage: Suitable for all types of upholstery.
In the case of a car seat, you need to take a sufficiently sized piece of ice, place it in a plastic bag and place it on the chewing gum.
The procedure time is about 30 minutes. Periodically, melted ice should be replaced with new one. After the chewing gum has hardened, it should be scraped off with a dull knife or stiff brush.
Then you need to treat the area with detergent. You can also use cold water or special means for freezing. Everything depends directly on the location of the contamination.
Heat
The method requires caution and is recommended for heat-resistant materials. There are two options - slowly pour boiling water over the contaminated area or use a hairdryer at maximum temperature. After 5 minutes, the chewing gum should be scraped off mechanically using available means.
Use of oil
Peanut, olive, orange and sunflower are effective. Care should be taken to avoid causing unwanted stains on an uncontaminated area.
After softening, the chewing gum is removed using a knife or a stiff brush. It is recommended to thoroughly rinse any remaining dirt with a cleaning agent.
Using Vinegar
Suitable for most fabrics, except delicate ones. It is important to remember that the vinegar should be well heated beforehand.
This can be done in a water bath or on the stove. Then It is necessary to dip a brush into the container with the solution and treat the area of contamination.
The procedure lasts until the sticky mass disappears from the car seat. Finally, it is recommended to wash the area with soap and water.
By means of a steam generator
This equipment is unique and allows you to cope with many types of contaminants. Chewing gum on a car seat is no exception.
Under the influence of steam, the sticky mass softens quite quickly, then removed mechanically. The only limitation is the material with unstable color.
Special means
If the use of improvised means has no effect, you should use special means.There are a sufficient number of them.
Afterwards, you should read the instructions for using several products and read reviews from real consumers. It is also necessary to take into account the material and quality of the upholstery.
Based on customer reviews, there are three most effective and universal means for removing chewing gum from a car seat:
| Name | Characteristic | Usage | Price |
| Gumex Spray Pramol | Aerosol, volume 0.5 l, shelf life – 2 years, made in Switzerland | cools the surface to -45?C. Apply using a spray can. Then the chewing gum is removed mechanically. | ? 980 rubles |
| Rapido Chewing Gum Remover | Softens and dissolves chewing gum, volume – 0.5 l, made in Germany | First, the chewing gum is removed mechanically, then the product is applied to the remains using a cloth. Exposure time is 10-15 minutes. After this, the contamination is removed with a clean rag. | ? 1250 rubles |
| Himitek Anti-sticker aerosol | Gel-like product, suitable for all surfaces, does not contain dyes, volume – 0.4 l. Made in Russia | First, shake the container vigorously. Then the product is applied to the chewing gum. Exposure time is 20-30 minutes. The sticky contaminant is then removed mechanically. | ? 370 rubles |
The products must be used according to the instructions. To avoid trouble, it is recommended to first conduct a test on a hidden area of the upholstery. Only after making sure there is no damage can you treat the contaminated surface.
Features of removal depending on the material
When choosing a method and means for removing chewing gum from a car seat, it is recommended to consider what the upholstery is made of. The most common:
-
Textile. For textile surfaces, it is recommended to use the freezing method using a cooling spray.After applying the aerosol, the chewing gum hardens for 10-15 minutes, then is removed using a scraper.
Residues can be removed with a regular eraser. Then it is advisable to wash the entire seat with soapy water so that no stains remain.
- Velours. Quite capricious and delicate material. In order not to damage the texture, you should heat the chewing gum and gradually remove it with progressive movements from bottom to top. After removing the dirt, it is recommended to treat the seat with warm water and soap. In this case, it is necessary to wipe the material with damp microfiber in one direction.
- Leather. It is recommended to remove chewing gum as quickly as possible after it appears on the car seat. This significantly increases the chances of eliminating contamination without leaving a trace. Next, you should freeze the gum using ice or a special product and cut it off with a dull knife with extreme caution.
Afterwards, treat the surface with a soapy solution using a lint-free cloth until the remaining sticky mass is completely removed. To return the seat to its original appearance, you can wipe it with conditioner or leather polish. Read more about removing chewing gum from leather surfaces. here.
What should you avoid?
In order to effectively remove chewing gum from a car seat without damaging the upholstery, It is enough to observe the recommended caution:
- Do not use the mechanical method until the sticky mass is exposed to freezing, heating or a special means. In this situation, you can remove part of the upholstery along with the chewing gum. The seat will be damaged.
- The use of aggressive agents is strictly prohibited. The seat material may be damaged by rough cleaning. Or, after removing the gum, a stain will remain.
- Chewing gum should not be wetted before freezing.
You will find all the most important and useful information about removing chewing gum from various surfaces in this section.
Video on the topic of the article
This video will show you how to remove chewing gum from a car seat:
Conclusion
Whatever method is chosen, the main thing is to remember its essence. Freezing helps turn the gum into a brittle mass. Therefore, it must be thoroughly rubbed and each piece carefully removed.
Heating melts the gum, making it pliable. It is necessary to slowly, gradually remove the mass from the contaminated area.
Special means have different effects. This means that you must first carefully read the instructions.
