Inexpensive, convenient and functional - Snegir petrol snow blowers and their characteristics
Removing fallen snow in winter can be done quickly and efficiently if special snow removal equipment is used.
Self-propelled snowmen are convenient and functional, and the cost of most models is affordable.
With their help, clearing snow drifts takes place without much effort and significant time expenditure. Among the manufacturers of snow blowers, we can highlight the products of TM Snegir.
Content
Manufacturer's description
Snow blowers Snegir are reliable self-propelled gasoline equipment. It is produced in China.
The characteristics of the manufactured models are different, which allows you to find equipment that meets your requirements among the entire range.
Advantages and disadvantages of snow removal machines
Snow removal equipment Snegir has many advantages:
bright modern appearance;- high quality;
- self-propelled;
- large set of speeds;
- metal screw;
- high cross-country ability;
- Ease of Management;
- not difficult maintenance;
- models are presented in assortment.
The disadvantages include:
- lack of headlights and electric starter in low-power models;
- slow reverse speeds;
- There are no environmentally friendly electric models in the range;
- Possible difficulties with original spare parts.
4 popular models
The manufacturer TM Snegir produces several models of snow blowers. Among which you can choose a snowfield with the necessary characteristics and suitable power.
4000
This model is a wheeled version snowblower. The Snegir device is self-propelled, engine power is 6.5 hp. The cleaning system is two-stage.
The bucket captures snow mass 51 cm wide and up to 40 cm high in one pass, which allows you to clear the area near buildings and paths. The screw is metal, toothed.
The direction of snow ejection is controlled from the control panel. There is no electric starter. There are 5 forward speeds and 2 reverse speeds. The cost of the goods is from 36,000 rubles.
4100
Self-propelled snow blower Snegir has a 7 hp engine. and stepped transmission. The bucket clears a strip 57 cm wide in one pass, and can collect snow up to 54 cm high. There are 7 speeds, 5 of which are forward. The device weighs 73 kg.
The screw is metal. The direction of ejection is adjusted from the control panel. Price Bullfinch 4100 – from 40,000 rubles.
4800
Self-propelled model Bullfinch equipped with a 7 hp engine. The width of the bucket is 57 cm. The height of snow collection is 54 cm.
There are 7 speeds, 2 – back, 5 – forward. There is a lighting headlight. The device weighs 78 kg. Price – from 40,000 rubles.
5200
The 5200 snow blower has tracks. This model Bullfinch – the most powerful in the line, equipped with a 15 hp engine. and weighs 115 kg.
A high-quality device provides comfort when working - there are heated handles, a lighting headlight, and an electric starter. There is a switchable differential lock.
The bucket of this Bullfinch machine is large - 71 x 54 cm. The snow throw range is up to 15 meters. The screw is metal, aggressive.The cost of the device is from 95,000 rubles.
Preparing for launch
The snow blower is delivered to the buyer in packaging. After opening it, you need to assemble it:
- secure the handles;
- attach the cables;
- install the gear shift lever;
- install a snow discharge chute, etc.
The assembly procedure may differ for different snow blower models, so it is important to check the instructions provided by the manufacturer.
If this is not the first start, and the snow blower has already been in operation, you just need to measure the oil level. If necessary, top up to the required level. You need to fill the fuel tank with gasoline, it is recommended to use AI-92.
After this, you should adjust the limit shoes, which are located on both sides of the auger housing. Before the start, the condition of the cables and wheels is also checked.
Before starting work, it is necessary to inspect the area to be cleaned. There should be no foreign objects on it that could make work difficult and lead to equipment failure.
How to launch and use?
You can start the Snegir engine using an electric starter or manually. Procedure:
Open the fuel tap.- If the engine is cold, close the air damper.
- Set the throttle valve to the “turtle” position.
- Press the primer several times.
- Connect the plug to the outlet.
- Turn on the ignition.
- After the engine warms up, open the air damper.
- If the model has the function of lighting and heated handles, they can be started.
You can also start the Snegir snow blower using a manual starter.This is a convenient option when starting away from a source of electricity.
When operating the Snegir snowplow, the wheel and auger drive levers are used. The speed is selected taking into account the type of snow that has fallen. For light fluffy snow, which lies in a thin layer, you can set it higher, for heavy wet snow - minimal.
After finishing work, it is recommended to let the engine run for another 5 minutes so that excess moisture evaporates from the housing.
Maintenance and storage
After finishing work, the Snegir snow blower needs to be cleaned. A special tool is used to clean the snow ejection pipe and augers., which comes with the package. If the auger is very dirty, you can use a directed stream of water. After the surfaces have dried, wipe them with a rag.
To store Snegir snow removal equipment, it is recommended to use closed rooms with sufficient ventilation. The humidity level should not be too high so as not to provoke the development of corrosion.
If it is necessary to transport the snow blower, it can be partially disassembled for compactness. High-quality maintenance of the Bullfinch involves following a set of measures.
Among the mandatory activities are the following:
- checking the oil level in the snowfield - before each start;
- after 25 hours of operation - change the oil, clean the air filter, clean the spark plug, place lubricant in the auger gearbox.
If necessary, other work can be performed to support the equipment and keep it in working order.
Where to buy, at what price?
The cost of Snegir snow blowers depends on the place of purchase and the choice of model. You can purchase the device in hypermarkets, specialty stores and online stores.
The minimum cost starts on average from 36,000 rubles for the Bullfinch 4000 model. A powerful, crawler-mounted device with advanced functionality will cost much more - about 100,000 rubles.
Reviews
Customer reviews of snow removal equipment from TM Snegir are mostly positive. Management is very simple.
The disadvantages buyers include
- not always high-quality assembly,
- relatively thin metal
- difficulty in purchasing original spare parts.
Alternative options
In addition to Snegir snow removal equipment, snowfields from other manufacturers are also in good standing with buyers - Parma, Interskol, Craftsman:
- Craftsman 88691. The Craftsman snow blower model has a 7.5 HP engine. 8 speeds are provided. The width of the bucket is 66 cm. The device weighs 93 kg, the price starts from 76,000 rubles.
- Interskol SMB-650E. Self-propelled snowman Interskol is a gasoline-powered device with good functional characteristics. The package includes an electric starter and a headlight. Bucket 56 x 54 cm. Metal auger with pronounced teeth. There is a choice of 8 speeds, 6 of which are forward. The price for Interskol of this model is from 46,000 rubles.
- Parma MSB-01-756. MSB-01-756 is a fairly compact snowfield with a good snow throw range - up to 15 meters. The machine has a medium-sized bucket, 56 cm x 42 cm. The ejection chute is adjusted manually from the control panel.
The fuel tank volume is standard for such models, 3.6 liters. Starting is from a manual starter, an electric starter is not included. There are 4 speeds for moving forward and 2 for moving backward. Weight is small - 63 kg.Parma costs from 35,000 rubles.
Read about Craftsman snow blowers Here, Interskol - here, Parma - here.
Repair: what can you do on your own?
When operating Snegir snow removal equipment, malfunctions and breakdowns may occur.
It is possible to cope with some problems on your own. But It is advisable to entrust serious failures to a specialist to eliminate.
Even if the engine does not turn on, this does not always indicate a serious breakdown. The switch may be faulty or there may not be enough electricity to run the electric starter.
Problems with operation may occur if the auger is blocked by a foreign object that is stuck. This can lead not only to poor snow removal and poor discharge, but also to breakdowns.
Even snow sticking to the chute and bucket from the inside can prevent the normal throwing of snow.. Cleaning with a brush will help solve the problem.
Conclusion
Snow blowers Snegir are affordable devices that are suitable for maintaining the area near private buildings, clearing small paths and areas near the garage.
With proper use and regular maintenance, such equipment can last for years.
