Review of the Redverg RD-SB 56/7 gasoline snow blower: advantages and disadvantages, cost, customer opinions

Heavy snowfalls require owners of private areas to make significant efforts to clear.

You can make your work easier and faster with the help of specialized equipment. A functional and reliable model is the Redverg RD-SB 56/7 snow blower.

Read the article about who makes the snow removal machine, what its advantages and disadvantages are, and how to use it correctly.

Model and manufacturer

The Redverg RD-SB 56/7 snow blower is a powerful piece of equipment with high maneuverability. The car has a 7 liter engine. s., which allows you to quickly cope with clearing an area of ​​700 square meters. m.

The model includes the following elements:

• metal toothed auger;
• snow catcher bucket;
• gear lever with 4 forward and 1 reverse speeds;
• gasoline engine;
• height limiters for the casing auger (ski);
• snow discharge chute;
• wheels;
• control levers;
• snow removal tool (attached to the rear of the auger housing with a mounting clip);
• bolts, cotter pins, washers, nuts.

The kit comes with a user manual (one with instructions for operating the equipment and one for the motor).

By 2010, the company was already selling:

• generators,
• trimmers,
• snow blowers and other power equipment.

Advantages and disadvantages

Among the advantages of the model Redverg RD-SB 56/7:

1. Four-stroke air-cooled engine with 7 horsepower. With.
2. A wide snow intake, which in one pass allows you to clear a 56 cm path from precipitation. The machine can easily cope with the removal of precipitation both in open areas and on sidewalk paths.
3. Availability of 4 forward and 1 reverse speeds. This helps optimize work by choosing the desired rhythm of movement.
4. The gutter and deflector are made of steel, which ensures their durability. It is possible to adjust the snow throw distance.
5. High cross-country ability, which is guaranteed by wheels with a diameter of 13 inches.
6. Economical consumption of fuel and lubricants.
7. Works on the popular brand AI-92 gasoline.
8. A durable and reliable metal auger that can crush snow and cope even with compacted snowdrifts.
9. Plastic skis that allow you to adjust the height of the casing and adjust it to the terrain.
10. Affordable price that matches the characteristics of the equipment.

Disadvantages of technology:

• The model does not have a headlight installed - working in the dark without lighting is not always convenient;
• manual engine start only - electric starter is not included in the package;
• The equipment is manufactured in China, for some consumers this may be a disadvantage, but the machines are assembled in factories that specialize in the production of snow removal equipment.

Assembly

The model is supplied partially assembled. To get started, you must complete the following steps:

1. Assemble the levers and handles. One handle is already installed on the panel. All that remains is to attach the second lever along with the cable and secure it with bolts and nuts.
2. Attach the auger drive control cable to the clamp on the belt guard.
3. Install transport wheels.
4. Install the snow thrower chute.

After completing the assembly, you need to check the reliability of all connections.

Launch and use

Before starting the equipment, it is necessary to fill the engine with engine oil. Its level is determined using a dipstick. It should be at the HIGH mark. If it reaches the LOW position, the engine will be damaged when attempting to start the snow blower.

The engine of the Redverg RD-SB 56/7 model is started from a manual starter. The procedure is as follows:

• secure the spark plug drive to the spark plug and check that it snaps onto the tip;
• turn the wheel and auger drive levers to the upper position;
• set the gas handle to the “Hare” position;
• turn the motor switch to the “ON” position;
• open the fuel valve lever;
• when starting a cold engine, the air damper is closed - if it is warm, it is left open;
• press the button responsible for pumping gasoline five times (this action is performed only with a cold engine);
• pull the starter handle, as soon as resistance is felt, pull the cord strongly to start the engine, if everything is done correctly, it starts working in 1-3 attempts;
• after warming up, open the air damper;
• The engine will gain full power after a few minutes of warming up; as soon as this happens, you can start clearing snow.

Features of equipment operation:

1. The gear selector is located on the panel.To adjust the speed of movement of the equipment, the lever is installed in the desired position. The slowest is 1, and the fastest is 4. The R position starts the machine in reverse.
2. To control the auger, the right lever is pressed against the handle. To stop it you need to release it.
3. The drive control is located on the left handle. In order for the wheels to start rotating, you need to press it.
4. The snow throw range is adjustable in two directions: by the direction angle and by the throw angle.
5. Cleaning a clogged chute is carried out only with the engine turned off. Before doing this, you need to wait a minute until all rotating parts come to a complete stop.
6. If you have to clean on a flat surface, the ski height adjusters raise higher. To work in gravel areas they are lowered.
7. After clearing the area of ​​snow, the machine is stopped and allowed to run for a few minutes. This is necessary for cooling and evaporation of excess moisture. Then move the throttle to the “Turtle” position and turn off the engine.

Maintenance and storage

Rules of service snow blower Redverg RD-SB 56/7:

1. Oil of class SF, SG or SH is poured into the engine. If the air temperature is below -18 degrees, then SAE OW30 oil should be used. It is prohibited to fill in compounds marked SAE 10W40 and 15W40.
2. The oil level is checked and, if necessary, topped up every time the equipment is started. The first time it is changed after 5 hours of operation, and then every 20 hours. In this case, the engine should be warm, but not hot.
3. A light coating of all-weather grease is used to lubricate metal parts. It is applied to the hex shaft every 25 hours of operation. In this case, the composition should not get on the aluminum wire plate and the rubber friction ring.
4. Once a season, remove the wheels, clean them and apply multi-purpose grease to the axle.Normal tire pressure is 1-1.2 bar.
5. To lubricate the screw control device, you can use Vaseline, linseed oil, and paraffin. The procedure is carried out once a season.
6. Spark plugs are checked every 100 hours of operation. If the insulator is cracked, the electrodes are worn out or burned, the part must be replaced.
7. Before storing for a period of 30 days or more, gasoline is drained from the tank.

Store equipment in a ventilated room, having previously removed all contaminants from it and applied oil to metal surfaces, which will help avoid corrosion.

Where can I buy?

You can purchase the model in stores that sell electronics and equipment.. The snow blower is also available in online markets. To make a purchase, it is better to contact trusted retail outlets so as not to transfer funds to scammers.

Price

The cost of the Redverg RD-SB 56/7 snow blower may vary depending on the retail outlet where the purchase is made. The average price of the model is 41,000 rubles. When arranging delivery and extended service, it may be increased.

Owner reviews

Consumers respond positively to the Redverg RD-SB 56/7 snow blower. They note the fast launch of equipment and stylish design. People are satisfied with the build quality. Users indicate that the unit easily copes with cleaning even dense and wet snow.

Alternatives

As an alternative to the Redverg RD-SB 56/7, You can consider equipment from the following manufacturers:

• Interskol SMB-6750;
• Huter SGC 4100;
• CHAMPION ST553 and others.

The listed models have similar functionality and are practically in the same price category.Read about Interskol snow blowers Here, Huter - here, a review of the CHAMPION ST553 snow blower is presented in this article.

Video on the topic of the article

Video review of the Redverg RD-SB 56/7 snow blower:

Conclusion

The Redverg RD-SB 56/7 snow blower is an inexpensive, powerful and reliable helper for the winter. With its help, clearing the area of ​​snow will be quick and effortless. In order for the machine to last as long as possible, it is enough to follow the rules for its operation.