Easy to operate, compact and maneuverable - electric snow blower Stiga ST1151 E

Even the heaviest snowfall will not be able to dampen the joy if you have the maneuverable electric snow blower Stiga ST1151 E at hand.

This machine is designed to facilitate work in compact areas during the winter.

Read the article about who produces snow removal equipment, what advantages and disadvantages it has, as well as how to use it.

Model and manufacturer

The Stiga ST1151 E snow blower is an electric-powered machine that is optimally suited for working in small areas. It is purchased for clearing snow on local areas, terraces, driveways, parking lots in front of stores and more.

Model features:

1. The engine has a power of 1.8 kW, which is equivalent to 2.40 liters. With.
2. Plastic screw. It is smooth, without nicks, and has a rubber coating.
3. The work surface is 51 cm wide and 25 cm deep.
4. Snow discharge chute with a rotation angle of 180 degrees and an inclination angle of 90 degrees. Its range can be adjusted manually. The maximum distance is 6 m.
5. Single-stage cleaning system.
6. Two wheels.
7. Control levers, power buttons, handle for transportation.

Snow blowers are manufactured by Stiga (a brand of the Global Garden Products group of companies), which was founded in Sweden in 1934. For more than 80 years, the company has been producing innovative mechanized equipment for the garden and home.

Video review of the electric snow blower Stiga ST1151 E:

Advantages and disadvantages

Advantages Stiga ST1151 E models:

1. Compact sizes. Even a woman can drive the car without difficulty.
2. Optimal handle height. For a person of average height, they reach waist level.
3. The well-thought-out shape of the auger allows you to remove snow up to 25 cm deep.
4. Soft coating on the handle. Your hands will not slip during operation.
5. Folding handle. This creates additional convenience during storage.
6. The presence of a handle behind the chute for easy transportation of equipment.
7. Plastic auger that does not damage the coating during cleaning.
8. Conveniently located buttons for starting the machine, turning on the auger and the drive control lever. They are located directly on the handle.
9. It is possible to control the equipment with one hand.
10. Low noise level, which is 86 dB at the operator's place of work.
11. Light weight of the product, which is 16.34 kg.
12. The declared service life from the manufacturer is 10 years. Warranty service is provided for 2 years.

Flaws:

• lack of a flashlight for working in the evening;
• a screw made of plastic, which is more prone to mechanical damage than its metal counterparts;
• the equipment is not suitable for clearing the area from compacted snow or ice;
• The machine's power is not enough to clean large areas.

Assembly

Before you start working, the Stiga ST1151 E snow blower needs to be assembled. After unpacking the box and reading the manual, the user perform the following actions:

1. Mount the handle by placing its central part on the snow blower and securing it with screws on both sides.Then screw on its upper part and secure the power cable using a clamp.
2. Assemble and install the outlet chute turning handles. After tightening the bolts, check that it works correctly. The gutter should turn freely in different directions.
3. Mount the deflector by inserting it into the exhaust channel. You need to press down on the rods until you hear a click.
4. Mount the cable clamp. It is attached to the central part of the handle.

Launch and use

To start clearing snow, the equipment needs to be put into operation. The procedure is as follows:

• using an extension cord, connect the snow blower to the power source - the cable is installed in a special holder so that it does not interfere while driving; before continuing to start, you need to make sure that there is no mechanical damage on the wire;
• slightly tilt the snowplow back and lift it slightly above the ground;
• press and hold the lever release button;
• pull the start lever;
• release the unlock button.

After starting the machine, you can start removing snow. Features of working with the model Stiga ST1151 E:

1. To begin clearing snow from the area, the auger is lowered to the ground.
2. The cable must be positioned behind while the machine is moving. This will prevent the worker from tripping over it, but also prevent it from getting caught on other objects.
3. To stop the equipment, you must release the start lever.
4. The model is designed for cleaning freshly fallen snow. There is no need to try to clear ice or dense snow with it.
5. If possible, the discharge chute is directed downwind. If it is strong, the deflector is slightly lowered down.
6. When clearing compacted snow, move the machine slowly.
7. After cleaning is completed, the machine is not turned off.It should run for a few minutes. This will prevent ice from forming on the parts.
8. Then remove the plug from the power outlet and transport the equipment to the storage location.

Maintenance and storage

Long and proper operation of the snow blower is guaranteed by compliance with the rules for its maintenance and storage:

• After each session, the adhering snow is removed from the machine body and other parts - it is most convenient to do this with a brush;
• Before each use, check the integrity of all controls - the screws must be tightly tightened and the auger must rotate freely;
• The device should be covered only after the engine has completely cooled and the moisture has evaporated;
• the internal structure of the snow blower can be cleaned with a jet of compressed air;
• It is forbidden to wash equipment with water - this will damage the electronics;
• before sending for long-term storage, areas with cracked paint are cleaned and covered with a new layer of paint;
• Anti-corrosion compounds are applied to metal surfaces;
• Store the snow blower in a dry, warm room - it should not be dusty or too damp.

All work is carried out only after the snow blower is completely disconnected from the power supply. Failure to do so may result in electric shock.

Where can I buy?

You can purchase the Stiga ST1151 E snow blower from official dealers of the brand. Sales are carried out by both retail stores and online markets.

Price

The cost of the Stiga ST1151 E snow blower is 15,000 rubles. This is an indicative price and is subject to change. depending on the chosen outlet, time of year and ongoing promotions.

Reviews

Consumers respond positively to the Stiga ST1151 E snow blower. They note that the car is light and maneuverable, especially in comparison with gasoline counterparts. With its help, it is easy to remove snow from paths and terraces.

Users note that the equipment does not require gasoline to operate, this allows you to avoid unnecessary expenses. They indicate high build quality and reliable parts.

Among the shortcomings, consumers identified the insufficient length of the electrical cord, its hardening in the cold, and the need to use an extension cord.

Alternatives

As an alternative to the snow blower Stiga ST1151 E The following models can be considered:

• DeWORKS SE 2500;
• Huter SGC 2000E;
• PATRIOT PS 2300 E and others.

You can learn about the DeWORKS SE 2500 snow blower from this Read articles about Huter snow blowers Here, Patriot - here.

Conclusion

The electric snow blower Stiga ST1151 E is a compact and maneuverable assistant for clearing snow in small areas. It is easy to operate and light weight and good maneuverability, which allows you to comfortably use the equipment in winter.