Compact, maneuverable and reliable assistant - electric snow blower Sibrtech ESB 2000
Heavy winter snowfalls can become a real headache for owners of private territories, but not for those who have acquired snow removal equipment.
With its help, clearing even large areas will take minimal time.
A model with high build quality and excellent performance is the Sibrtech ESB-2000 electric snow blower. Read all the details about it in the article.
Content
Model and manufacturer
The Sibrtech ESB-2000 snow blower is designed for clearing loose snow immediately after it has fallen.
The equipment copes well with work in small areas:
- platforms,
- parking lots,
- paths,
- sidewalks,
- entrances to houses and garages.
It is recommended to use it only on flat surfaces.
The model includes:
- snow blower body;
- lever;
- rack;
- wheels;
- lower knife and auger;
- snow ejection chute with rotary handle, deflector;
- manual;
- a set of nuts, brackets and pins for assembly.
The manufacturer of the Sibrtech ESB-2000 snow blower is the Russian company of the same name. It has been on the market since 2008 and has managed to establish itself as a reliable supplier of electrical equipment and tools.
Pros and cons of snow blowers
Among the advantages of the model Sibrtech ESB-2000:
- The snow capture width is 46 cm, which is enough to clear driveways, paths and sidewalks.
- Maneuverability and ease of control.
- The presence of rubber linings on the auger, which avoid damage to the coating.
- Possibility of operation at temperatures from -20 to +5 degrees.
- Sufficient snow throw range, which is 9 m.
- Double insulation of all metal parts from the power source. This guarantees maximum safety when using the equipment.
- Compact size, so you don't need a lot of space to store the machine.
- Environment protection. The machine runs on electricity.
- Modern design. The case is made in two colors: black and green.
- The average service life of the machine declared by the manufacturer is 5 years.
Flaws:
- lack of headlights, which complicates snow removal in the evening;
- plastic screw and chute - parts made of this material are inferior in strength to their metal counterparts;
- inability to use the machine to remove compacted snow and ice;
- the need to comply with the requirements for the coating, it must be smooth.
Assembly
The product is delivered to the buyer almost assembled. However, some manipulations still need to be performed independently:
- Open the box, remove the device and its components, check their compliance with the stated list.
- Align the holes in the middle pillar with the holes on the lower pillar. Then install the handle mounting bracket and secure it with nuts on both sides.
- Align the holes in the middle pillar with the holes on the top handle; secure the fastening bracket with nuts.
- Install the power cord clamps on the middle post and the top handle. Secure the cord in the clamps and make sure there is enough slack.
- Mount the wire fastening bracket to the middle pillar.
- Install the deflector, aligning the holes with the recesses on the gutter, insert the screws and tighten them with nuts.
- Install the gutter handle. It is inserted into the holder on the B-pillar so that it stands straight and its grip points upward. Align the holes on the handle with the holes on the chute turning rod and insert the pin.
Launch and use
To put the Sibrtech ESB-2000 snow blower into operation, perform the following manipulations:
- Connect the machine to an electrical circuit. To do this, use an industrial extension cord, which is designed for outdoor use. The maximum wire length should be 30 m.
- Secure the extension cord to the bracket. Connect it to a power source.
- Adjust the position of the snow ejection chute and the angle of inclination of the deflector.
- Slightly tilt the device back and lift the auger above the ground.
- Press and hold the lock button I, press the auger activation bracket II. As soon as the machine starts working, release the lock button.
- Lower the snow blower to its original position and carry out the work of clearing the area.
- After cleaning, turn off the device by releasing bracket II.
Features of operation:
- there should be no foreign objects on the territory that could cause equipment breakdown (stones, wire, construction waste, etc.);
- if there are areas with crushed stone and pebbles, they need to be bypassed by lifting the scraper above the ground;
- it is unacceptable to block the bracket when it is in the “on” position;
- keep your hands and feet away from the rotating auger;
- Before starting, you need to make sure that the machine is stable;
- if the auger is blocked, there is no need to attempt to turn on the device - first you need to find out the reason for the blocking;
- the snow blower must be moved at a sufficient speed, but not too fast;
- It is better to start removing snow immediately after it falls - this will make the work easier, if its thickness does not exceed 20 cm, you can move the equipment at normal speed, if there are snowdrifts it should be reduced, wet and compacted snow is removed slowly;
- After cleaning is completed, leave the machine running for a few minutes to prevent ice from forming on its parts.
Maintenance and storage
Maintenance consists of the following:
- Before each use, check the integrity of the controls, the serviceability of electrical components, and the functionality of the auger.
- To prevent ice crust from forming on the auger, silicone spray is applied to it before work.
- After completing the work, all parts must be cleared of snow and dirt.
Where can I buy?
You can purchase the Sibrtech ESB-2000 snow blower in retail stores or online markets. The advantage of buying online is the ability to deliver the device to the desired address. The main thing is not to transfer funds to dubious sellers, so as not to encounter scammers.
Price
The average cost of the Sibrtech ESB-2000 snow blower model is 17,000 rubles. The price may vary depending on the season, markup of the outlet and ongoing promotions.
Reviews
Users respond mostly positively to the Sibrtech ESB-2000 snow blower. They note that it is maneuverable, does not take up much space when stored, and is easy to move.
The rubberized auger removes snow well; after an operating season, even minor defects in the form of cracks and chips do not appear on the body. If you follow the operating instructions, the equipment works properly.
The disadvantages include weak fastening of the socket for snow ejection and unreliable fixation of the power cord on the hook.
Alternatives
As an alternative to the Sibrteh ESB-2000 snow blower You can consider models from the following manufacturers:
- Greenworks GES13;
- CARVER STE 2146;
- PATRIOT PS 1500 E and others.
Read about Greenworks snow blowers Here, PATRIOT - here.
Video on the topic of the article
Video review of the Sibirteh ESB 2000 snow blower:
Conclusion
The Sibrtech ESB-2000 snow blower will be an excellent choice for people who need a compact, maneuverable and reliable assistant for clearing snow from the area.
It is easy to maintain and does not require much storage space, and in winter it is able to replace several workers with ordinary shovels at once.