Champion

Snow removal equipment is in great demand in Russia, where most regions are characterized by frosty, snowy winters.

Champion snow blowers help to successfully solve the problem of dealing with snow and ice.

The consumer has a choice of petrol self-propelled models and electric devices. Each model is unique and has its own advantages and characteristics.

Manufacturer's description

The Champion brand, created by the St. Petersburg company Wald, dates back to 2005. The company engaged in the wholesale trade of gardening equipment, at that time already collaborated with the world's leading manufacturers, such as:

• Oregon Stihl
• Husqvarna,
• Jonsered and Partner.

The young brand was tasked with developing the production of functional household appliances. Champion products had to combine high quality standards and reasonable prices, while remaining accessible to the widest range of consumers.

To supply high-quality components, contracts were concluded with the world's leading manufacturers:

• France,
• USA,
• Europe,
• India.

The design and ergonomics of Champion snow removal equipment were developed in accordance with Russian climatic conditions and taking into account the wishes of the Russian consumer. All this ensured its reliability and high quality standards.

Today Champion continues to expand its product range: new models of gardening equipment are being developed, consumables for petrol and electric tools are being produced.

You can purchase Champion products through a wide network of dealer organizations covering Russian regions, as well as countries near and far abroad.

Pros and cons of Champion snow blowers

Champion company specializes in the development and sale of electric and gasoline models of snow blowers of various capacities.

The consumer is offered a large selection of wheeled or tracked equipment with excellent maneuverability in snowy or icy conditions.

Models equipped with an American Briggs & Stratton engine have a special design that ensures easy starting even at low temperatures.

Champion snow blowers equipped with a rubber auger can be used to clear snow from decorative surfaces. In models with a combined control system, in addition to a manual starter, an electric starter is provided, which ensures smoother and faster engine starting.

Line of luxury snow blower models has heated control handles and mufflers that reduce engine noise. The double-circuit mechanism for collecting and discharging snow helps to improve the quality of clearing the area.

Among the shortcomings noted by consumers is accelerated wear of the drive belt caused by misalignment of the motor shaft and auger pulley or breakage of the pressure roller. An incorrectly adjusted angle of rotation of the chute can cause snow to be thrown onto the body and the formation of ice.

Another drawback noted in a number of models: the headlight is blocked by a chute for throwing snow, which significantly limits the illuminated area. This makes it difficult to use the snow blower in the evening. Electric models are less powerful and their operation is limited by the length of the cable.

It is difficult to purchase original spare parts for Champion snow blowers, which can result in problems during repairs. This is especially true for models equipped with an engine from the American company Briggs & Stratton.

Model range of snow blowers: characteristics, prices

All Champion snow blower models are ergonomic, reliable and durable. They are based on a housing that houses an engine with a manual or combined control system.

The operating mechanism is located at the front of the device. This is a bucket with a rotating auger that scoops up the snow mass and directs it to the chute. To fasten the auger, special shear bolts are used to avoid equipment breakdown in the event of an accidental collision with an obstacle.

The control unit, located on the frame, includes control levers, a gear shift knob, a button to start and stop the equipment.

The side parts of the device are equipped with wheels or tracks (for self-propelled devices), providing good maneuverability. Snow is thrown through a chute with an adjustable lift angle and direction.

Gasoline

Gasoline engine models are powerful designsdesigned for cleaning large areas. They are equipped with a transmission with several gears, an auger with large teeth and are suitable for clearing the area of ​​wet, compacted snow and crust.

They are noisier in operation and are not environmentally friendly. Gasoline models can be divided according to the width of the casing, which determines the number of passes across the area to completely clean it.

ST655BS

Models with a working casing width of up to 60 m are the most compact. These include the Champion ST655BS snow blower. It is not self-propelled, has a single-stage snow collection system. Thanks to the rubberized auger, the snow blower can be used for cleaning delicate surfaces.

The model is designed for clearing small areas of fresh, dry and loose snow. Thanks to its low weight, the device is maneuverable and mobile. The average price for a snow blower is RUB 36,437.

ST661BS

Snow blowers with a working width of 60 to 70 cm are the most versatile. They can be used to clean a wide variety of areas.

They combine several advantages:

• small sizes,
• power,
• maneuverability,
• ability to work at low or high speed.

Can be used in private households and public utilities. An example of such a model is the Champion ST661BS self-propelled type, equipped with a reliable American-made Briggs & Stratton engine. Powerful wheels with deep treads provide good maneuverability.The snow blower is suitable for cleaning not only fresh, but also wet, compacted or deep snow cover. Cost - 75,600 rubles.

STT1170E

Models with auger working widths of 76 cm and above represent Champion's most powerful range of models. They are equipped with 10 hp engines. and above, have heated control handles. A lighting system is provided for work at night.

The Champion STT1170E tracked snow thrower belongs to the class of machines with a large auger working surface. The device combines compact size and high power (11 hp engine) Crawler drive provides excellent traction to the ground.

The machine can operate on difficult terrain, as it has excellent maneuverability and stability. The distance of snow mass emission reaches 17 meters. The cleaning intensity can be adjusted by switching speeds (there are 6 forward and 2 reverse speeds). The cost of the STT1170E model is RUB 114,990.

Electrical

Electric snow blowers are less powerful. They are purchased for clearing snow from a small area in front of a house or a summer cottage.. They are not self-propelled and are driven by human pushing force. An electric snow blower can handle a small layer of dry, recently fallen snow.

It can be used where it is possible to connect to an electrical network, and its range is limited by the length of the cable. They are distinguished by their compactness, low price, simplicity of design, environmental friendliness, and lack of vibration during operation.

STE1650

Model STE1650 – miniature snow blower weighing up to 16 kg with a simple and convenient control system. It has a bucket measuring 50 by 33 cm, which ensures good performance.The model is equipped with special protection that protects the operator from electric shock during operation.

The 1600 W electric motor features silent operation. Snow is thrown out of the chute at a distance of 5-7 m. The price of the model is 10,086 rubles.

Review of the Champion ST553 snow blower is presented in this article, ST662E - in this, ST 762 E — here, st556 — Here, st661 — here, st656 — Here.

Preparing for launch

Before operating your Champion snow blower, it is assembled and adjusted as described in the operating instructions. The fuel tank is filled with gasoline, and the required amount of clean motor oil for four-stroke engines is poured into the engine crankcase.

Refueling

Champion snow blowers use pure unleaded gasoline AI-92. Filling the tank is done in a well-ventilated area or outdoors, provided there are no open flame sources nearby.

Filling engine oil

To fill the engine crankcase with oil, the snow blower is placed on a flat surface. Pour the required amount of oil (SAE5W30 brand or another, corresponding category and viscosity) into the oil filler hole of the crankcase, and then check its level.

They do this as follows:

1. Install the dipstick cover and remove it again. If the oil level corresponds to the upper mark, it means that the oil is filled to the lower edge of the neck.
2. Place the cap in the oil filler hole, close it tightly and turn on the engine for 30 seconds.
3. Check the oil level with the engine running using the mark on the dipstick and, if necessary, adjust it.

Adjusting the height of the snow fence

To ensure quality cleaning, The auger casing is raised above ground level using special skids:

• when working on hard surfaces, the casing should be lowered as close to the ground as possible;
• when working on uneven or soft surfaces, raise the casing higher to prevent debris from being picked up from the ground;
• Make sure the runners are set to the same height on both sides.

User manual

Let's look at how to start and use a Champion snow blower.

How to start?

Before starting the engine, check the oil level in the engine crankcase and the fuel level in the tank., after which they launch:

1. Open the fuel valve and set the choke lever to the “closed” position.
2. The gas lever is moved about a third, towards maximum engine speed (the “hare” position).
3. They pump up the fuel by pressing the pumping primer three times.
4. Set the engine switch to the “on” position.
5. Start the engine using a manual or electric starter, following the operating instructions.
6. As the engine warms up, open the air damper.

Before starting work, set the desired direction of snow ejection and the angle of inclination of the chute. Then the required speed is set.

Before turning off the engine, allow it to idle for 5-7 minutes, and move the gear lever to the “neutral” position. After stopping, close the fuel valve to prevent possible overflow of gasoline into the carburetor. Thoroughly clean the device from adhered snow and ice.

How to maintain and where is the best place to store?

Snow blower maintenance consists of periodically checking its technical condition and eliminating emerging problems:

1. Before starting work, check the oil level in the engine and the fuel level in the tank. They control the quality of tightening of threaded connections, as well as the integrity of the auger shear bolts.
2. Every 25 hours of operation, the auger shaft is lubricated with antifreeze lubricant.
3. After 50 hours of operation, the spark plug is checked or replaced, and the drive and auger drive belts are checked.
4. After 300 hours of engine operation, condensate is removed from the fuel tank and washed.

An important part of Champion equipment maintenance is changing the engine oil. The first time it is performed after 5 hours of operation, then after 25 hours, and subsequently every 50 hours of operation. This is done with the engine warm, which ensures complete drainage of the used oil.

The oil change is carried out as follows:

• Having installed the machine on a flat surface, remove the oil dipstick and unscrew the drain bolt, then drain the oil into a suitable container;
• tighten the drain bolt;
• pour a new portion of oil of the desired brand through the neck;
• check its level by putting on and removing the oil dipstick again;
• make sure that the oil level corresponds to the mark on the dipstick;
• Fix the dipstick tightly, and then check the oil level again with the engine running (look at the mark on the dipstick after 30 seconds of engine operation).

After this, pour a little oil into the spark plug hole, rotate the shaft to ensure the oil spreads over the rubbing surfaces, and then return the spark plug to its place.

By pulling the starter handle, the engine intake and exhaust valves are closed.to prevent the formation of corrosion. Lubricate the drive worm gear. The snow blower is installed on a horizontal surface in a clean and warm room with a normal level of humidity, without temperature changes.

Where can I buy?

You can buy high-quality Champion snow removal equipment in the online store of the official website of the Champion company or in a specialized store selling household appliances.

Reviews

The CHAMPIONST655BS snow blower efficiently removes snow up to 30 cm high, although it is a bit difficult to walk on virgin soil.

Reliable in operation, but When hitting an obstacle, the auger casing may crack. Finding spare parts for it is extremely difficult.

First impressions of using the CHAMPIONST656 snow blower are very positive. The car is well made and starts quickly.

The CHAMPIONST762E model buries itself with a bucket when moving uphill. Work on flat terrain and downhill - no complaints. When clearing wet snow, CHAMPION snow blowers quickly clog the snow mass ejection chute.

Champion ST656 is a reliable unit that has been working flawlessly for three years. The disadvantage is the lack of a headlight, which makes it difficult to work in the evening. Over the three years of operation, the Champion ST656 has shown itself only on the positive side.

The operating instructions for it are very detailed and understandable. Good build quality, starts great in cold weather.

Alternatives

Let's consider alternative options for snow blowers on the market:

Patriot PS 601

Gasoline snow blower with a powerful 7 hp engine, capable of processing a path 56 cm wide in one pass with a maximum snow depth of up to 42 cm.

The unit is equipped with a mechanical transmission with the ability to switch speeds (5 - forward and 2 - reverse), a convenient handle for the angle and distance of snow throw. The direction of rotation of the chute is adjustable up to 190°. The machine is equipped with a manual starter.

The disadvantage of the device is the weak clutch. An overview of the snow blower is presented in this article.

Hyundai S 6561

A household type snow blower, characterized by high-quality assembly and functionality. Has a powerful 6.5 hp petrol engine. The carburetor heating function and electric starter ensure quick start and operation of the engine even in frosty weather.

The device has a bright headlight, which makes it easy to use in the evening. The equipment is quite mobile and maneuverable, despite its weight of 61 kg. Regulation of the speed of movement and cleaning is provided by a transmission with the ability to switch speeds from 1 to 4 positions.

Deep tire treads provide good maneuverability of the equipment. The snow blower removes compacted and wet snow well. An overview of the snow blower is presented in this article.

Daewoo Power Products DAST 3000E

Electric snow blower with high performance. A powerful auger with rubber pads cuts off a layer of snow up to 33 cm thick. The device features a very convenient and functional control unit.

A small mobile device weighing 16 kg can be easily delivered to a summer cottage.The snow ejection system is single-stage. The setup is done manually (remote is not provided). Difficulties may arise when working with stuck snow. An overview of the snow blower is presented in this article.

Repair

During a preventive inspection, which is carried out at the beginning and end of the season, certain malfunctions may be discovered. Most of them can be fixed by the user themselves. If independent repair, for some reason, is impossible (and also if major repairs are necessary), you must contact a specialized service center.

DIY repair Champion snow blower is possible in the following cases:

1. Snow blower won't start. In this case, make sure that there is fuel in the engine and it is of high quality. Then check whether the fuel valve is open. Monitor the oil level in the engine crankcase and top up if necessary. Make sure the spark plug is working properly. If necessary, replace the primer.
2. Engine power is too low. Check whether the fuel system and muffler are in good working order (if necessary, clean it). If the snow thickness is too great, then reduce the speed.
3. If the device vibrates during operation, then check the fastening of the parts. The auger or impeller may need to be replaced.
4. Slow driving speed may indicate wear on the drive belt. In this case, replace the belt.
5. Problems when shifting gears occur when the clutch cable wears out. It needs replacing.
6. Pressing the drive lever does not result in movement when the friction wheel wears out. It requires replacement.
7. The auger does not rotate. Perhaps the shear bolts broke when hitting an obstacle. They should be replaced.

Weak snow emission

Poor snow ejection or no ejection when the auger stops may indicate that the shear bolts have broken due to collision with an obstacle. In this case, they are replaced and work continues.

The cable may break, causing the equipment to stop working.. In this case, the auger drive cable needs to be replaced.

Conclusion

According to experts, Champion is the best of the household snow blowers supplied to Russia by the Chinese manufacturer. With careful adherence to operating and safety rules, the devices operate for many seasons without requiring repairs.

They are compact, easy to operate, and capable of cleaning a large area without refueling the engine.