Review of Champion ST662E petrol self-propelled snow blower

A compact snow blower is a device for clearing snow that can facilitate the work of clearing paths and areas.

This technique is suitable for use in a private home. One good option is Champion ST662E.

A review of the Champion ST662E petrol self-propelled snow blower is presented in the article.

Description of the snow blower Champion

The snow thrower model ST662E of the Champion brand is a semi-professional wheeled equipment.

The unit consists of the following main parts:

• engine;
• frame;
• control drives;
• system for collecting and discarding snow mass;
• transmission.

Champion ST662E is one of the effective snow removal models that copes with the task of removing snow from the local area, the area in front of the garage, garden paths, etc. The snowball is equipped with a large bucket 61 x 51 cm and a powerful metal auger. For ease of use, the manufacturer provides 6 forward speeds and 2 reverse speeds.

The engine of the ST662E model is gasoline, four-stroke. Cooling is air. Power – 6.5 hp. The Champion has a powerful headlight and heated grips. The weight of the device is 80.5 kg.

A description of the model can be seen in the video:

Advantages and disadvantages

Champion ST662E enjoys the trust of customers thanks to a large list of advantages.

Pros of the model ST662E:

• powerful auger;
• large ladle;
• presence of a headlight;
• there are heated grips;
• current design;
• ease of control;
• affordable price;
• durable metal screw;
• large list of speeds.

Assembly

The snow blower is delivered to the buyer in a box in a partially disassembled condition. In order to start working, the Champion needs to be completely assembled.

After opening the packaging of Champion ST662E you should do the following:

1. Take out the contents of the box.
2. Inflate the wheels.
3. Install wheels and secure.
4. Install the handle rack.
5. Place the handles and levers in the desired positions.
6. Connect the traction.
7. Connect the lower and upper parts of the activation cable.
8. Adjust the auger and drive cables.
9. Install a snow discharge chute.
10. Connect the deflector control lever and the deflector control cable.
11. Mount the chute rotation control shaft.

When installing wheels, you need to pay attention to the arrow shown on the side of the tire - it shows the direction of rotation for better traction of the wheel, taking into account the tread.

Preparing for launch

Further operation largely depends on the correctness and thoroughness of the assembly of the Champion ST662E, as well as the preparation of the snow blower.

At the preparatory stage, you must perform the following steps:

• prepare engine oil;
• refuel the engine;
• check the oil level, top up if necessary;
• pour fuel into the fuel tank;
• put lubricant in the gearbox;
• check the quality of fasteners;
• check the condition of the controls;
• if necessary, pump up the wheels;
• check the condition of the augers;
• check that the area to be cleaned is free of mechanical obstacles, as well as animals and people;
• make sure that the height of the snow fence is set correctly, and adjust if necessary.

Champion ST662E comes from the factory without gasoline or engine oil.

How to launch and use?

Once the Champion equipment is prepared, you can start launching and begin clearing snow. Starting can be manual or with an electric starter.

Recoil starter

When using a recoil starter you need:

1. Check oil level.
2. Make sure there is gasoline in the tank.
3. Determine the direction of the wind.
4. Taking into account the wind direction, turn the snow thrower so that the exhaust gases go with the wind.
5. Air damper – close.
6. Fuel tap – open.
7. Move the gas lever towards the maximum by 1/3.
8. Set the ignition to “On”.
9. Bleed the fuel pump using three presses.
10. Turn the starter crankshaft. If necessary, repeat the procedure.
11. After the engine has started, return the starter handle smoothly to its original place.
12. Open the air damper slowly to allow the engine to warm up.

On average, warming up takes about 60 seconds.

Starting with electric starter

The Champion ST662E electric starter allows you to start the snow blower from the mains. To do this, perform the following steps:

1. Use an extension cord to ensure that the snow blower has access to an electrical outlet.
2. Insert the plug into the socket.
3. Carry out the launch in the same way as manual, going through steps 1 to 8.
4. Press and hold the electric starter button for no more than 5 seconds.
5. Once the engine has started, the button must be released.
6. Remove the plug from the socket.
7. Place the extension cord in place.
8. As the engine warms up, open the air damper.

You can make sure that the engine has warmed up sufficiently by the following signs:

• the damper is fully open;
• the engine continues to operate without failure;
• valve cover is warm.

Turning off the engine

After clearing the required area, the Champion ST662E engine must be turned off. If this is a planned shutdown, then the order is as follows:

1. Stop the snow blower.
2. Go to idle speed.
3. Leave the engine running for another 60 seconds.
4. Turn the ignition switch to “Off”.
5. Close the fuel valve.

In case of emergency shutdown, turn the ignition switch to the “Off” state. and close the fuel valve.

Snowman's work

Operation of Champion equipment involves primarily moving in a straight line. At the snow blower there is a reverse motion that allows you to change the direction of movement – turn around and go around obstacles.

As necessary, gasoline should be added to the gas tank and oil to the engine. In case of serious breakdowns, the equipment must be sent to a service center for repairs.

How to maintain and where to store?

Quality service should include:

• oil level control;
• checking the condition of screws and other elements;
• refueling with gasoline;
• storage in appropriate conditions;
• timely repairs, etc.

Machine oil

The Champion ST662E has a four-stroke engine. Engine oil must be selected taking this condition into account.

The manufacturer recommends filling with CHAMPION SAE 5W30 or similar, which is suitable for this type of engine and is designed for use in the cold season.

The oil must be replaced on time after it has exhausted its service life.. Between replacements, it should be topped up as needed, checking the level with a dipstick.

The very first oil change should be done after 5 hours of operation. The next, second replacement is carried out after 25 hours of operation. All further oil change procedures are performed every 50 hours of operation of the device.

Procedure for filling oil for the first time:

1. Place the snow blower on a horizontal, flat surface.
2. Unscrew the cap (it also doubles as a dipstick) from the neck.
3. Pour in the required amount of oil.
4. Wipe the dipstick on a rag.
5. Insert the dipstick into the hole.
6. Without tightening it, carefully pull out the dipstick to check the oil level.
7. Reinstall the dipstick cover.
8. Twist.

The maximum oil level corresponds to the lower edge of the crankcase.

Fuel

Champion ST662E is a gasoline snow blower. To operate, it must be filled with AI-92 gasoline. Fuel should not be filled to the very top; its amount should be 2.5 cm below the top edge.

Procedure for filling the fuel tank:

1. Wipe the outside of the fuel tank from dust and dirt if it is very dirty
2. Unscrew the lid.
3. Pour in gasoline. This can be conveniently done using a special funnel.
4. Close the lid.

Snow collection height - adjustment

There are slides on the outside of the Champion auger housing that allow you to make adjustments.

When choosing the required position, you should evaluate the condition of the surface. If it is far from ideal, then the augers should be installed high, so as to avoid accidental damage to the structural elements of the snow blower.

When adjusting the position of the augers, it is necessary to check that the height level on both sides is set to the same level.

The screw mechanism itself is not designed for contact with a layer of ice. Violation of this rule can lead to serious damage and further expensive repairs. Adjusting the snow removal height should always be done with the engine off.

Run-in

The first 5 hours of operation of the Champion equipment are considered a break-in period.. At this time, you cannot overload the device and set high intensity.

During this time, the parts are ground in and it is possible to determine, if any, assembly defects. After running-in, change the oil. Subsequent operation proceeds as usual.

Storage

For long-term storage (until the next season), the snow blower must be prepared. The device is installed on a flat floor, oil and gasoline are drained, and parts are lubricated for maintenance. You can put a cover on top of the Champion ST662E so that idle equipment does not collect dust.

Where to buy, at what price?

Snow blowers, including the Champion ST662E, can be purchased in specialized departments of hypermarkets, as well as in stores selling equipment for gardening and gardening, or online.

The average cost depends on the place of purchase, and differs for different modifications. For Champion ST662E this is 64,000 rubles on average.

The new equipment comes with instructions from the manufacturer and a 1-year warranty on the snow blower.

Owner reviews

Buyers who purchased the ST662E model note that the snow blower has more advantages than disadvantages.

Pros:

• copes well with removing loose snow;
• comfortable heated handles;
• good starting with manual and electric starter;
• good snow throw range;
• convenient use;
• convenient control;
• powerful lighting – 2 headlights;
• good overall equipment.

Minuses:

• unreliable auger drive device;
• control cables can freeze in severe frost;
• slow passage through large snowdrifts, slipping is possible;
• there is the possibility of manual and electric winding;
• not all spare parts can be found on sale;
• weak transmission protection cover.

Alternatives

In addition to the Champion ST662E, good snow removal machines include equipment produced by Hooter, Patriot and other manufacturers.

Huter SGC4800

Huter SGC 4800 – snow removal equipment for domestic use. The device runs on gasoline, has a large bucket and a reliable auger. The weight of the structure is 76 kg. Captures snow: 56 x 50 cm, throws it up to 10 meters. Engine power – high, 7 hp. Price – from 51,000 rubles.

Hyundai S5556

Hyundai of this model is a gasoline unit with a capacity of 5.5 hp. The bucket has parameters of 0.53 x 0.51 m. It throws snow up to 11 meters.

The weight of the device is 57 kg. Average price – from 54,000 rubles.

Patriot PS603E

Patriot is a mid-range gasoline snow blower. The snow blower's bucket is relatively small - 56 x 42 cm. The device throws snow at a distance of up to 12 meters. A headlight is provided for work in the dark and in snowfall. Cost – from 48,000 rubles.

Conclusion

Champion ST662E is an easy-to-maintain snow blower that is suitable for personal use and for clearing small areas.

With properly organized storage and care such equipment can last for many years without loss of efficiency, significantly making work easier.