Rating of Briggs Stratton gasoline snow blowers: characteristics, prices, opinions of owners
The market for non-professional and professional snow removal equipment for removing small areas offers customers a wide range of products.
Looking for the best options, many residents of private homes and utility workers make their choice in favor of TM Briggs Stratton snow blowers.
Content
Manufacturer's description
For clearing snow on personal plots, small compact snow removal equipment is a functional and convenient option for a special tool. For many years, the American company Briggs & Stratton has been among the leaders in the world market.
In addition to snow blowers, the company produces:
- engines for various equipment,
- generators,
- lawn mowers and other equipment.
In addition to self-propelled equipment, which has greater productivity, Briggs & Stratton also produces non-self-propelled versions of snowfields for regular clearing of light snow from fairly flat surfaces. This technique is not suitable for large areas.
Simple models have a one-stage cleaning system, more complex ones have a two-stage cleaning system.. Briggs & Stratton focuses on the production of gasoline snow blowers. The country where the snowfields were assembled is China.
You can see a device with a two-stage cleaning system in operation by watching the following video:
How snowfields work with a one-stage cleaning system - in the video:
Advantages and disadvantages of Briggs Stratton snow blowers
Briggs&Stratton snow removal equipment enjoys well-deserved trust from customers because combines many advantages:
- reliability;
- high quality of materials and workmanship;
- a significant range of models allowing you to choose a device to suit your taste;
- ability to start and operate at low temperatures;
- ease of use of technology;
- current appearance;
- a wide range of speed modes;
- good performance characteristics;
- presence of headlights and electric starter;
- not difficult to assemble.
The disadvantages include the following:
- high cost of professional models;
- It may be difficult to purchase original spare parts.
6 popular models
Among the popular Briggs & Stratton models are devices with one-stage and two-stage cleaning. The cost of snowfields varies widely.
BS822E
The single-stage cleaning device is designed to remove mostly light snow from smooth paths and sidewalks. It has a 5.5 hp Briggs and Stratton engine.
The kit includes an electric starter. The Briggs&Stratton bucket is relatively small, designed to capture a snow strip 55 cm wide and up to 32 cm high. The augers are smooth, rubber-plastic. Fuel tank - 1.9 liters.
The wheels are small, 8 inches. There is a lighting headlight.The adjustment of the snow ejection chute is mechanical, with a good range. The gutter is plastic. Through it, snow is thrown at a distance of up to 10 meters. The weight of the device is 42 kg. Its cost is from 50,000 rubles.
S1024
Briggs and Stratton self-propelled model equipped with a 6.5 hp engine from the same company. In the snowfield, a metal auger and a bucket with a relief provide snow capture of 61 x 51 cm. The wheels are large, with a pronounced tread, 15 inches. Snow throw is up to 11 meters, cleaning is two-stage.
A lighting headlight is included in the kit. The Briggs&Stratton unit weighs 95 kg and costs from 110,000 rubles.
Elite 1527
The Briggs & Stratton self-propelled model with wheel drive has an electric starter. The snezhnik is adapted to work in difficult extreme winter conditions. The engine is powerful, 10 hp., Briggs and Stratton Company. The bucket is large, 68 x 50 cm. The ejection direction adjustment is mechanical. The screw is embossed, made of metal.
The handles of this model are heated. There is a lighting headlight. Fuel tank - 3 liters. The snowfield weighs 110 kg, such equipment costs from 100,000 rubles.
1022E
The engine on the Briggs&Stratton snow blower is a four-stroke, gasoline, of its own production. The cleaning system is single-stage. Engine power – 6.5 hp. There is an electric starter. The auger casing is small, 55 x 32 cm.
The screw is plastic. The angle of rotation of the snow ejection chute is wide, 200?. The cost of the device is from 50,000 rubles.
BM1227SE
Self-propelled snow blower has a Briggs and Stratton 8 hp engine., snow capture is ensured by a 69 x 53 cm bucket. Snow is thrown at a distance of up to 12 meters.The cleaning system is two-stage. The chute and auger are made of metal.
The model includes headlights, heated grips and an electric starter. The weight of the snowflake is 91 kg. The price of the device is from 115,000 rubles.
BP2132SE
This Briggs&Stratton model has high power (13 hp) and good maneuverability. The highly functional device grabs snow with a large 81 cm wide bucket.
The height of the collected snow is 51 cm. The auger is powerful and textured. The cleaning system is a two-stage one, allowing you to throw snow away at a distance of up to 15 meters. Fuel tank - 5.3 liters.
Additional convenience is provided by two headlights and heated handles. The weight of the device is 142 kg, the cost is from 380,000 rubles.
Preparing for launch
Before you begin assembling your new Briggs & Stratton snow blower, you should read the instructions. Each model has its own assembly and operation features that must be taken into account.
Assembly is not difficult, but requires care, and strict adherence to the manufacturer’s recommendations. It includes the installation of a number of parts that were not installed to make the delivery compact. This applies to control levers, handles, and cables. Assembly and installation of the deflector is also required.
How to launch and use?
The operating procedure for TM Briggs&Stratton snow blowers is not complicated. It is possible to start with a manual starter or an electric one. Depending on the snow blower model, there are differences in the control system and in the location of the handles and control levers.
Operating conditions also matter. Any Briggs&Stratton model can easily handle loose, light snow.But if you need to clear large areas, and the snow is often wet and icy, then it is better to use snow blowers with two-stage cleaning, with a more powerful engine and larger wheels with a pronounced tread.
The more complex the task a snow blower faces, the lower the speed the operator needs to set. If the snow layer is very thick, layer-by-layer clearing may be necessary. It will also help to pass a new strip with a small grip on the already cleared part of the surface.
The height of the auger relative to the surface being removed can be adjusted using guide skis, which are located on both sides of the self-propelled snow blower bucket.
When clearing a flat surface, the augers may go lower. If the surface is uneven, then it is better to install them higher. The Briggs & Stratton snow blower must be used strictly for its intended purpose, without overloading the engine.
Maintenance and storage
Briggs&Stratton snow blowers are sent for long-term storage (until the next winter season) after a routine inspection and draining of fuel. The equipment should be kept in a dry room on a flat surface.
When caring for snow removal equipment, the manufacturer recommends using Briggs&Stratton engine oil designed for four-stroke engines.
The required volume of oil is selected for a specific model. It is also possible to use technical fluids from other manufacturers that meet the operating conditions.
Maintenance of snow removal equipment includes timely oil changes every 25 hours of operation and checking/replacing the spark plug every season. If necessary, replace worn parts.
Place of purchase and cost
You can purchase a snow blower from the well-known American brand Briggs & Stratton in online stores and in hypermarkets that sell equipment for gardening, vegetable gardens and maintaining cleanliness near private households. The cost of the product depends not only on the model, but also on the place of purchase..
Simple Briggs&Stratton snow blowers with a single-stage cleaning system can be purchased at a price of 50,000 rubles. More complex, professional devices cost much more – up to several hundred thousand rubles.
Reviews
Buyers of Briggs&Stratton brand snow blowers note the high quality of the products. Sometimes wet snow may stick to the ejection port, but this is not a problem. Not all models cope with clearing wet heavy snow.
Alternatives
In addition to Briggs & Stratton snow removal equipment, owners of snow blowers also speak well of the following models from well-known manufacturers:
-
Parma MSB-01-761EF. The petrol snowman TM “Parma” cleans a strip 61 x 50 cm wide in one pass. The auger is embossed, metal. Snow is thrown up to 15 meters.Fuel tank – volume 3.6 l. There is a large selection of speed modes. There is a headlight and an electric starter. The device weighs 79 kg, price – from 41,000 rubles.
- Interskol SMB-650E. Gasoline Interskol has a 6.5 hp engine. Snow capture - 56 cm wide and up to 54 cm high. Snow throwing - up to 12 m. There is an electric starter and a headlight. Interskol weighs 73 kg. Its price is from 46,000 rubles.
- Denzel SMD 610S PRO. Denzel of this model is a professional snow blower. The snowman is able to cope with wet snow and ice. Snow capture provided by the auger casing: 61 x 54 cm. There is an electric starter and a headlight. Engine – 7 hp. Snow throwing – up to 15 meters. The cost of the device is from 76,000 rubles.
A review of Parma snow blowers is presented in this article, Interskol - in this, Denzel - in this.
Do-it-yourself repairs
Repair of Briggs&Stratton snow removal equipment is best left to professionals and carried out in specialized workshops. But in some cases, you can solve the problem on your own. One of the common problems is poor snow throw. There can be various reasons, and most can be dealt with on your own.
The main ones include the following:
- Wet snow sticking to the auger and chute. In this case, it is necessary to clean the structural elements using a special tool.
- A foreign object has entered the augers, impeller, or ejection port. The solution to the problem is to remove the object that is interfering with the normal operation of the snow blower.
- Deformation of parts that are involved in collecting and throwing away snow. Broken elements should be replaced.
- The speed of the snow blower is too high, due to which the device does not have time to fully collect and throw away the snow. The solution to the problem is to set a more appropriate driving speed.
- Damaged/loose drive cables. Diagnostics are necessary; if there is obvious wear, replacement is carried out.
Engine problems that are caused by breakdowns require professional repairs. In some cases, the snow blower may not start because there is no fuel in the tank.
Conclusion
Briggs&Stratton snow removal equipment is one of the most popular on the world market.Using snow blowers strictly for their intended purpose, observing all measures to prevent malfunctions and carrying out high-quality maintenance, such equipment can serve for years without loss of quality and appearance.
