Residues left by epoxy or wood resin are some of the most difficult contaminants to remove.
The adhesive sticky substance has very good adhesion to any surface.
When choosing what to use to remove a resin stain, you need to take into account its type, the size of the affected area and other factors.
With the right approach, using home recipes and special products, the resin can be removed.
Content
What should you do first to remove a stain?
Fresh, small stains of resin that have not had time to dry are much easier to remove. If you act quickly, the likelihood of eliminating contamination without a trace increases.
When the resin has just come into contact with clothing, skin or other surfaces, you must try to remove as much of the adhesive mass as possible immediately.
This must be done very carefully, without spreading the stain over an even larger area. It is convenient to use a napkin or rag for this purpose.
The thick mass, while it is fresh, can be lifted with a scraper or a regular spoon. After most of the resin has been removed, a residue may remain on clothing or other items.
Before proceeding with further processing, the soiled item must be prepared - remove dust and dirt. You also need to decide which product is suitable for dealing with stains based on the type of resin and type of material.
How can you remove a stain using folk remedies?
Despite the fact that resin is a complex contaminant that adheres very firmly to various surfaces, it is quite possible to remove this substance even with simple means.
Vegetable oil
Sunflower or other vegetable oil can be used as a solvent. A good result can be achieved when the resin has not had time to harden.
Alcohol
Alcohol-containing liquids can be used as a resin remover. The best option is pharmaceutical alcohol. If the stain is small, then it will be enough to apply the product to the sponge and rub. It is better to soak slightly dried stains first.
Petrol
Refined gasoline is often used at home as a solvent.
Apply it to a napkin and moisturize the area with the stain well. so that the resin begins to separate.
For greater effect, a napkin soaked in gasoline can be left on the stain for a quarter of an hour. After this, rub the area with the stained area.
Acetone
Acetone can be used to remove resinous residue. A technical one or one used to remove nail polish will do. Apply the product to the stain, rub, leave for a few minutes, and rub again.
Ammonia, turpentine and starch
An effective, yet non-aggressive remedy is a mixture of starch, turpentine and ammonia. Preparation procedure:
- Prepare a container for mixing the components.
- Pour in 1 tsp. ammonia.
- Add 1 tsp. turpentine
- Add 1 tbsp. starch.
- Mix all ingredients.
Temperature effect
When cured, the resin hardens. It can be removed by exposure to low or, conversely, high temperature. Methods involving heating or freezing are some of the main and very effective methods for removing resin.
Freezing
Exposure to low temperatures allows the hardened resin to become brittle. Once frozen, it can be crumbled and peeled off. This method is suitable for clothes that can be placed in the freezer for a couple of hours.
Heat
If freezing is not possible, the resin can be removed by heating. Under the influence of high temperatures, it will begin to melt, and it will be easier to remove.
This method is suitable for some fabrics that can withstand heat. It is convenient to use an iron for these purposes.
In this case, it is necessary to ensure that there is always a cloth or paper towels between the resin and the sole of the iron. Otherwise, the mass, which has become viscous, will begin to stick to the iron and smear.
As the resin warms up and transfers to paper, they should be replaced with clean ones.. Before practicing heating, you need to check on the label on the item for the maximum exposure temperature that is suitable for a given fabric.
How to remove with special compounds?
What else can you do to remove a resin stain? In addition to improvised materials, special means can be used to remove resin.These are purchased drugs, completely ready for use.
Beckmann stain remover
One of the products for removing tar from clothes is TM Beckmann stain remover. It is designed to remove not only resin from fabric, but also technical oils, as well as bitumen.
The drug is applied to the stain undiluted and left to act. In this case, it is necessary to ensure that the composition does not dry out. After the stain remover has begun to act, the area with the stain is cleaned, removing any remaining dirt with a damp cloth. Price – about 200 rubles.
Sonax cleaner
Sonax product is intended for cleaning car body from tree resin and organic pollution from birds. The product can be used on paintwork, chrome parts, glass, plastic, including for cleaning any type of headlights.
In addition to being used for cleaning cars, Sonax is suitable for treating other surfaces - window glass, bicycle frames, etc. The drug is used according to the instructions. The price of a bottle is 0.4 l. – about 750 rubles.
Mellerud
The product is intended for cleaning surfaces from:
- glue,
- resins,
- soot,
- fat, etc.
The preparation can be used for cleaning:
- stone,
- wood,
- fabrics,
- PVC,
- ceramics.
If necessary, the treatment should be repeated. Price – about 500 rubles.
Removal Features
Depending on where exactly the resin has hit, the appropriate method of exposure is selected, which is most suitable for the particular case.
From hair
In cases where viscous drops hit your head, you must act very carefully. After the maximum amount of adhesive has been collected, Apply sunflower oil, body lotion or rich cream to the strands.
As the substance softens, it will become pliable and can be pulled down along the strand.
Will tell you more details this article.
Skin
It is recommended to remove resin from skin, as well as from hair, using fatty, oily compounds. For this, baby oil, fatty face cream, vegetable oil and even mayonnaise can be used. How to remove resin from your hands, read Here.
Car
Most often, the car suffers from the ingress of tree resin and sticky plant buds.
The best option in this case is special auto chemical products.. Before using the drug, you must check all the information on the product packaging.
You can learn how to remove tar from a car here.
Fabrics
It is necessary to wash the resin taking into account the material from which the item is made. This is a very important point, since the wrong product may be ineffective or even lead to damage to the fabric itself.
Solvents such as gasoline and kerosene can be used for cleaning.. Stain removers are also a good option. Read about how you can remove resin from clothes. Here.
Boards, benches, benches on the street
It may be necessary to remove the resin from the board before using it in construction, finishing work, etc. Areas of wood with leaking sticky material differ in color.
The following solvents will help you cope with oleoresin:
- White Spirit;
- turpentine;
- refined gasoline;
- acetone, etc.
Read more in this article.
Fur from dogs, cats and other animals
If your pet gets dirty with tree resin, then You can use the following methods to eliminate it:
- Cut off the affected piece of fur.
- Apply vegetable oil and try to carefully pull out the resin.
- Use hypoallergenic body lotions.
If the animal is stained with epoxy, you can carefully cut off the matted fur. Or use alcohol-containing products to remove.
Circular saw
Resin may accumulate on the teeth and tips of a circular saw during operation. How to deal with it can be clearly seen in the video:
From glass
One of the following solvents will help remove tar stains from glass:
- White Spirit;
- acetone;
- alcohol, etc.
A good effect is also ensured by autochemical preparations for resin.
Grinding wheel
The procedure for cleaning the grinding wheel can be seen in the video:
Resin type: what does it affect?
Resins that may cause staining are can be divided into two main groups:
- Synthetic.
- Natural.
Despite their different origins, they are all characterized by high adhesive properties and stickiness.
Epoxy
Epoxy is a synthetic substance. It is obtained chemically. This resin is used in repair work, construction, etc. Upon contact with the hardener, the epoxy composition hardens and becomes resistant to external influences.
He will tell you how to remove epoxy resin from various surfaces. this article.
Woody
Tree resin is a thick, dark, viscous liquid.. It is produced in large quantities by pine, birch and some other types of trees.
Prohibitions
When removing resin, you should remember some prohibitions:
- It is possible to remove adhering substances using sharp objects, for example, a knife, only in limited situations - to cut off the “drop” itself. In other cases, the use of a sharp object is not advisable, as it may damage the base material itself.
- It is not advisable to use solvent chemicals to clean hair and hands. Aggressive agents can lead to irritation, cause an allergic reaction and even cause wounds.
- If the chosen remedy for removing resin does not help, and you plan to use another one, the previous one should be washed off.
- You should not use force when removing the sticky layer from the surface - this may damage the surface.
- There is no need to rush to wash a stained fabric item, since regular washing does not remove the resin.
Recommendations
In order for resin removal to take place effectively and without unpleasant surprises, It is recommended to take the following tips into account:
Before using a special product, you must make sure that it is intended for a specific type of resin and can be applied to the type of surface that has been damaged. Information about this can be found on the packaging.- The sooner you start removing contamination, the greater the chance that it will be removed without a trace.
- Before you start removing the mark on the fabric, the stain needs to be localized so that the resin does not spread over an even larger area.
- When removing a stain, you need to move from the edge towards the center of the mark.
- Do not allow the sticky thick substance to spread over the surface of the material. If it gets on the fabric, then the material around the perimeter of the mark can be moistened so that the stain does not become even larger.
Conclusion
If the question arises of how to wipe off the resin, you can use folk recipes, thermal methods and special purchased preparations. Each method has limitations that must be taken into account.
