Effective ways to remove wood and epoxy resin from hair
A similar nuisance can happen both during construction work and while walking in the forest. It is sometimes easier to wash resin out of your hair than if it gets on your skin or clothes.
However, there are many simple ways to solve this problem, the effectiveness of which depends on the type of hair, the nature of the contamination and the speed of its removal.
We will tell you in this article how and what you can use to remove resin from your hair.
Content
What to do first?
The primary task is to separate the contaminated strand from the rest of the hair.. A plastic bag, cling film or foil is suitable for this.
How to remove using improvised means?
The easiest and fastest way to fix the problem is to cut off the damaged strand. If the contamination covers too large an area of hair and cutting is not desirable, you can resort to several simple but very effective techniques.
Vegetable oil and other fat-containing products
This method is suitable for wood resins. Thoroughly lubricate the contaminated area with oil and leave for 20-30 minutes until the resin is completely softened.
For greater effectiveness, it can be slightly warmed up. Then, using a wide-toothed comb, carefully comb the strand, pulling out pieces of resin along the way. After this, wash your hair with plenty of shampoo or soap.
How to remove with alcohol?
Perhaps the best remedy for eliminating such contaminants. In particular, because it is part of most natural and synthetic resins.
It is enough to moisten a cotton pad or piece of cloth in alcohol and gently rub into the resin. When the substance begins to separate from the hair, comb it out with a comb and rinse your hair with shampoo several times.
Petrol
Blot cotton wool or a piece of gauze with a few drops of gasoline. Apply to the stuck area, then thoroughly comb out the softened resin and rinse your hair several times with detergents.
Cooling
As the temperature decreases, the resin becomes less elastic. If the piece is small, it can be crumbled and removed from the hair with a comb.
If this is the root zone, the strand should be kept raised to avoid hypothermia of the scalp.
Heating
Some hard resins soften already at 50-80 °C. The most common household hair dryer can produce a similar temperature range.
To do this, set the maximum temperature and apply a continuous air flow directly to the contaminated area.
If the tarred area is close to the scalp, then the skin must be covered with a thick bandage to prevent thermal burns.
How can you scrub with special compounds?
In addition to household products, Resin removal is possible using special reagents, which specialize in the removal of varnishes and paints based on resins and their derivatives.
Gum turpentine
Unlike technical turpentine, it does not burn the skin and does not cause an allergic reaction. Can be purchased at the pharmacy in the form of a balm. The average cost is 200 rubles. for 250 ml.
How to clean with white spirit?
The application technique is the same as with other organic solvents. However, the procedure time should be shortened, since prolonged inhalation of vapors negatively affects the central nervous system. Sold at any hardware store. The average cost is 100 rubles. for 0.5 l.
Acetone
Widely used in everyday life and industry. Dissolves varnishes and paints based on cellulose nitrate. In large quantities, it partially destroys rubber.
Sold in hardware and construction stores. Price – from 80 rub. for 0.5 l.
Features of cleansing different types of curls
When choosing a product, it is important to consider the condition of the hair. Not only the effectiveness, but also the safety of a particular method will depend on the structure and density:
-
For rare and thin For hair, vegetable oil or any fat-containing product is better suited. This could be mayonnaise, Vaseline, fatty baby cream.Apply generously to the problem area and cover with cellophane or film for 30-40 minutes. Then comb the strand, simultaneously removing soft resin lumps.
- For thick combination hair The method given above may not be effective enough. In this case, you should resort to the ice cooling method.This will take a lot of time, but will have minimal traumatic effect.
- For fatty people hair, you can use alcohol, acetone, nail polish remover, and other acceptable solvents. However, before using this method, it is worth trying a more gentle method.
For sparse and oily hair, you can use the hot blowing method. For thick ones, it will be more troublesome, since it will take a long time to comb out the softened resin.
After using a hot hairdryer or solvents Hair washing must be completed by applying balm and/or a moisturizing mask.
The nuances of removing various types of resins
Wood resin is much easier to remove than synthetic resin. By its nature, it is softer and contains substances such as alcohols, acids and oils. The use of compositions based on similar components (ethanol, turpentine, other solvents) allows you to effectively remove the resin ball without much effort.
Epoxy resins contain hardeners. This makes most of them resistant to weak acids and alkalis. Therefore, it is recommended to remove the resin from the hair within several hours, until it has completely hardened.
What not to do?
If resin gets on your hair, it is strictly not recommended to use aggressive solvents - strippers, DMF and acids - to remove it. They are designed for metal surfaces, and therefore instantly leave a burn on the skin and damage the hair.
Adviсe
If you can’t wipe off the resin for a long time, don’t despair and cut off the strands.In some cases, hair cleansing occurs within half an hour, and sometimes up to several hours.
It has been proven that the best tar remover is pure ethyl alcohol.. If it does not help effectively enough, it is necessary to dilute it with turpentine in a 1:1 ratio.
Apply the resulting solution in a small amount onto a cotton pad and rub into the tarred area until the clot softens.
Recipes and tips for removing resin from various surfaces are presented in this section.
Conclusion
The key to successful resin removal is to take the necessary measures within the next few hours. Auxiliaries can be substances widely used in everyday life: oils, cream, alcohol.
If the contamination turns out to be difficult to remove, solvents such as acetone and turpentine will come to the rescue.. However, it is worth remembering that prolonged exposure to such substances on the skin and respiratory organs can lead to swelling and intoxication.
