Effective ways to remove scale from a stainless steel kettle at home

foto18848-1Scale forms on the inner surface of any kettle. Stainless steel appliances are no exception.

You cannot leave a thick layer on the walls. It not only worsens the thermal conductivity of the device, but also harms human health by depositing in the kidneys in the form of stones.

How descale the kettle from stainless steel at home, read the article.

How to get rid of it using folk remedies?

You can cope with lime deposits using folk remedies. Some of them are as effective as specialized household chemicals, but are much cheaper.

Lemon acid

Citric acid is an effective remedy for combating lime deposits. She is able to cope with even the oldest layer. Depending on the thickness of the deposit, take from 10 to 20 g of powder per 1 liter of water.

The product is dissolved in water, brought to a boil and left to act for 30-60 minutes. The thicker the layer, the longer the acid is kept in the kettle.

Then it is washed and boiled with clean water, but it is not drunk, but drained to get rid of the remaining lemon juice. Read more here.



The video will show you how to get rid of scale in a stainless steel kettle:

Vinegar

The second most popular anti-scale agent is vinegar.To remove old plaque, use essence (2-3 teaspoons per 3 liters of water). If the scale is insignificant, make do with table vinegar (50 ml per 3 liters of water).

The product is poured into a kettle and brought to a boil. After an hour, the solution is drained, the device is washed and boiled with clean water.. Read more about descaling a kettle using vinegar. Here.

The main disadvantage of vinegar is its pungent odor, so the procedure must be carried out in a well-ventilated area.

Under no circumstances should you lean low over the kettle and inhale its vapors. This can lead to burns of the mucous membranes.

How to remove scale from a kettle using vinegar, video instructions:

Soda

To remove salt deposits, pour 3 liters of water into the kettle and add 6 heaped teaspoons of soda. After which the solution is boiled and left for 2 hours. Then thoroughly clean the device with a sponge and rinse with water.

Baking soda can soften and remove only a thin layer of deposits. Therefore, it is advisable to use it for preventive or superficial cleaning. Details - in this article.

Coca-Cola, Fanta, Sprite

foto18848-2These carbonated drinks contain orthophosphoric acid, which quickly and without a trace dissolves limescale.

To carry out the procedure, fill the kettle halfway with the drink and bring it to a boil. When the liquid has cooled, the walls are cleaned with a brush, after which the device is thoroughly rinsed with clean water..

Since Coca-Cola and Fanta contain dyes, it is not recommended to use them to remove scale from plastic appliances. In this case, it is better to use Sprite. Read more about descaling with Coca-Cola in this article.

Oxalic acid

You can deal with plaque using oxalic acid.It works in a similar way to lemon juice. To remove lime deposits, you will need 10 g of powder for every liter of water.

When the solution boils, turn off the gas and wait until it cools down. You need to soak the acid in the kettle for at least 2-3 hours.

If the plaque is insignificant, then you can use fresh sorrel leaves. They are simply boiled in a kettle for 10-20 minutes.

When the liquid has cooled, it is drained. This method cannot be called effective. It is more suitable for preventing salt deposits.

Apple and potato peelings

Apple and potato peelings contain fruit acids that can help fight scale.

The procedure is as follows:

  • foto18848-3a clean peel without traces of soil is placed in a teapot and filled with water;
  • bring it to a boil;
  • leave for 2-3 hours;
  • thoroughly rub the walls with the hard side of the sponge and a cleaning agent;
  • Rinse the kettle with clean water.

If you put in some effort, you can even get rid of an old layer of scale, but to do this, the procedure must be carried out at least 3 times. This method is good because it doesn’t cost a penny, since the peel would still go in the trash.

Cucumber or tomato pickle

There is no need to rush to flush the brine left over from pickled cucumbers or tomatoes down the toilet. It can be used to descale a kettle.

The procedure is as follows:

  1. Pour the brine into the kettle. It should completely cover the scale layer. If it is not enough, you can add a little water.
  2. Bring the liquid to a boil.
  3. Leave for 2-3 hours.
  4. Rinse the kettle with water several times, then boil and drain the liquid.
Brine is not only an affordable, but also an effective means to combat lime. It is practically not inferior to professional household chemicals.

How to remove with household chemicals?

You can find professional scale cleaners on sale. There are formulations designed specifically for dummies. The following tools are popular:

  1. foto18848-4Antiscale. It is available in powder form, packaged in small bags weighing 100 g. To remove scale, 1 package is required. The powder is poured into a kettle, filled with water, boiled and left for 2-3 hours. Then the device is thoroughly washed. The cost of 1 package is about 15 rubles.
  2. Topper. Liquid is used to remove scale. It is bottled in 250 ml plastic bottles. For 1 liter of water take 120 ml of cleaning composition. Heat the solution to 50 degrees and leave for 30 minutes. The cost of 1 bottle is 150 rubles.
  3. SonixBio, descaler. Pour 1 liter of water into the kettle and add 100 ml of cleaner. Heat the composition to 50 degrees, after 30 minutes pour out the solution, rinse thoroughly and boil the container. Price for 250 ml – 140 rubles.

Products can be purchased in a store, in the household chemicals department, or ordered online.

After pouring the cleaner into the kettle, you need to warn all family members about this in order to eliminate the possibility of poisoning.

Preventing the formation of lime deposits

To prevent stainless steel from becoming covered with a thick layer of limescale, you need to adhere to the following recommendations:

  • do not leave water inside;
  • use soft filtered or bottled water for the kettle;
  • Regularly clean the inside of the device with baking soda and a sponge;
  • carry out preventive treatment at least once a month; for this, use “light” means, for example, potato peelings.

Helpful information

A stainless steel kettle is a durable device, but if not properly cared for, even it can be damaged. To prevent this from happening, you need to adhere to the following recommendations:

  1. foto18848-5Do not use a hard wire brush to remove limescale. Do not try to scrape off scale with a knife or other sharp tools.
  2. When using professional cleaners, strictly follow the instructions. Do not leave them in the appliance longer than indicated on the packaging.
  3. Do not attempt to remove scale using caustic acids.

After completing the processing, be sure to boil the kettle using clean water. You can't drink it. The first liquid must be drained.

You will find a lot of useful information about descaling here.

Conclusion

You can remove scale from a stainless steel kettle using improvised means. The most effective are citric acid, carbonated drinks and cucumber pickle. If the limescale deposits are old, store-bought cleaners come to the rescue.

Discussions

How to remove odor

Scratches

Yellow spots